NORMS标准查询
-
ANSI Z 124.6
Test item 测试名称： American National Standard For Plastic Sinks 塑料水槽的美国国家标准 Test info 测试内容： Clause Test Requirement 2 General requirement 普通要求 2.2 Dimensions and tolerances 尺寸以及偏差 2.4 Installation,care, and maintenance instructions 安装，注意以及保养说明 2.5 Identification 鉴别 3 Workmanship and finish 工艺以及外观检查 4 Structural integrity of complete units 全套样品的结构完整… -
AS 1756
Test item 测试名称： Household Sinks 家用水槽 Test info 测试内容： Clause Test Requirement 1.5 Design 设计( surface & dimension ) Strength and support test 强度与支架试验 ( built-in sink ) Strength and support test 强度与支架试验 ( inset sink ) 1.6 Installation instructions 安装说明 1.7 Marking 商标 2 Cast iron vitreous enamelled sinks 铸铁搪瓷水槽 2.2 Material and wo… -
AS/NZS 1229
Test item 测试名称： Laundry troughs and tubs 洗衣槽以及浴盆 Test info 测试内容： Clause Test Requirement 1.5 Design 结构设计 1.5.1 Corner radii 角半径 1.5.2 Flashings 防水板 1.5.3 Drainage 排水 1.5.4 Support 支架 1.5.5 Rigidity 坚硬度 A6 Vertical deflection of tiling flange 瓷砖边缘的垂直偏转 A7 Horizontal deflection of tiling flange 瓷砖边缘的水平偏转 A8 Deflection at the outlet 排水口的变形 1.5… -
EN 13236
Test item 测试名称：Safety requirements for superabrasives 超硬磨具安全要求 Test info 测试内容： Testing Items Clause 5.1 Requirements for superabrasive grinding wheels Clause 5.1.1 General Clasue 5.1.2 Bore tolerances Clause 5.1.3 Maximum permissible plastic deformation Clause 5.1.4 Maximum unbalance Clause 5.1.5 Maximum operating speeds Clause 5.1.6 Saf… -
ASME A 112.18.1
Test item 测试名称： Plumbing Supply Fittings 卫浴供水配件 Norm refer 涉及标准: CSA B 125.1 Test info 测试内容： Clause Test Requirement Shower Head (淋浴头）physical part / 物理部分 （no moving parts) Shower Head (淋浴头）physical part / 物理部分 （with moving parts) Hand Shower (手持花洒）physical part / 物理部分 （no moving parts) Hand Shower (手持花洒）physical part /… -
AS/NZS 3718
if applicable) . 样品要求: 全套样品5套并包括安装说明书(如适用) . Turnaround time: Normal (12 working days) 所需时间: 标准(12个工作天) Sample for reference 参考图片: plastic mat -
ASME A 112.18.2
Test item 测试名称： Plumbing Waste Fittings 卫浴排水装置 Norm refer 涉及标准: CSA B 125.2 Test info 测试内容： Clause Test Requirement 4.1 Materials 材料 4.1.3 PP for tubular waste fittings (ASTM D4101) 4.1.3 ABS for tubular waste fittings(ASTM D3965) 4.1.3 PVC for tubular waste fittings(ASTM D1784 class 12454/14333) 4.1.4 ABS, PVC DWV for pipe and… -
ASTM F 409
Test item 测试名称： Standard Specification for Thermoplastic Accessible and Replaceable Plastic Tube and Tubular Fittings 塑料管以及管件 Test info 测试内容： Clause Test Requirement Full Test (Physical Test) PP Material ABS Material PVC Material Sample required: 4 sets of completed products with assembly instruction (if applicable) &… -
ASME A 112.18.6
Test item 测试名称： Flexible Water Connectors 易曲的水连接器 Norm refer 涉及标准: CSA B 125.6 Test info 测试内容： Clause Test Requirement 4 General requirements 普通要求 4.1.1 NSF PART (Metal Only) NSF PART (Metal and Organic Material) 4.1.2 Solder and fluxes (lead) 焊接处及熔融处 Metal alloys (lead) 金属合金 4.1.3 Copper alloy (Cu) 铜合金 4.1.4 Steel parts (c… -
ISO 8029
Test item 测试名称： Plastics hose-General-purpose collapsible water hose, textile-reinforced- Specification 橡胶软管-一般可曲编织软管的规范 Test info 测试内容： Clause Test Requirement 4 Classification (as claim-4 type) 分级 5 Couplings and end fitting 结合及端口配件 6 Materials and construction 材料及构造 7 Dimensions and tolerances 尺寸与偏差 8 Physical properties 物理性能 8.1 Plasti… -
EN 14428
Test item 测试名称：Shower enclosures—Functional requirements and test method 淋浴围栏—功能要求以及测试的方法 Test info 测试内容： Clause Test Requirement 4.1 General 普通 4.2 Cleanability 清洁度 4.3 Impact resistance / shatter properties 防冲击/碎片性状 4.3.2 Thermally toughened safety glass 钢化安全玻璃 4.3.3 Plastics material 塑料材料 4.4 Durability 耐久性 4.4.2 Corrosion re… -
BS 2945
Text item 测试项目：Specification for Axes and hatchets 斧子和手斧规范 Text info 测试内容： Testing Items Normal Test 常规测试 4 Material 4.1 Heads 4.2 Handles 4.2.1 General 4.2.2 Wooden handle 4.2.3 Steel handles 4.2.4 Glass fibre reinforced plastics handle 5 Manufacture 5.1 Heads 5.2 Eye 5.3 Handles 6 Heat tratment and hardness 6.1 Heads 6.2 Steel handles 6.3 … -
BS 3159-1
Text item 测试项目：Woodworking saws for hand use 手工木工锯检测 Text info 测试内容： Testing Items 5 Material 5.1 Blades 5.2 Handles 5.2.1 handles shall be of the closed type 5.2.2 Wooden handles 5.2.3 Plastic handles 5.3 Teeth 6 Proportions and finish 6.1 General 6.2 Blades 6.3 Handle 6.4 Wooden handles 6.5 Plastics handles 7 Classes of saw(class1~4) 8 Mar… -
BS 3159-2
Text item 测试项目：Tenon and dovetail saws 木工燕尾槽锯 Text info 测试内容： Testing Items 5 Material and manufacture 5.1 blades 5.2 backs 5.3 handle 5.3.1wooden handle 5.3.2 plastic handles 5.4 Teeth 6 Proportions and finish 6.1 general 6.2 blade depth out of back and blade thickness 6.3 back width and back thickness 6.4 general requirements … -
UIC 564-2
国际载客轨道车辆防火和消防规范 Test info 测试内容： Test Clause and standard Requirement conditioning 22±2℃ and 50~65% to constant mass Rigid non-thermoplastic materials 附录4：测定钢性非热塑性塑料材料的防火性的测试方法(合板、木纤维板、硬纸板、模压板和玻璃/聚酯压板) 9 pcs, 160mm×400mm; A B C级9个测量尺寸为160mm×400mm Coated and uncoated textiles 附录5：测定涂层及非涂层纺织品的防火性的测试方法 1… -
NFPA 130
Test item 测试名称： Standard for Fixed Guideway Transit and Passenger Rail Systems 固定式导轨传输系统 Test info 测试内容： Test Clause Requirement Conditioning Chapter 5 Stations/车站 Construction 主要关于车站结构及构件的要求，主要为耐火要求。如包括门、通道、防火分区、通风、布线等要求 Cable 燃烧测试：UL 1581 section 1160、CAS C22.2 No.0.3、UL 1865、NPFA 262其中一个标准。 烟密度：ASTM E662 Seating … -
ISO 4589-2
Test item 测试名称： Plastics -- Determination of burning behaviour by oxygen index -- Part 2: ambient-temperature test 塑料-用氧指数法测定燃烧行为-第2部分:室温测试 Test info 测试内容： Test Clause Requirement conditioning conditioned for at least 88 h at 23 ± 2 °C and 50 ± 5 % relative humidity immediately prior to use. Sample Required: For moulding … -
ISO 4589-3
Test item 测试名称： Plastics -- Determination of burning behaviour by oxygen index -- Part 3: Elevated-temperature test 塑料－燃烧行为的氧指数测定 第3部分：高温试验 Test info 测试内容： Test Clause Requirement conditioning conditioned for at least 88 h at 23 ± 2 °C and 50 ± 5 % relative humidity immediately prior to use. Sample Required: For mou… -
ASTM D 3801
Test item 测试名称: Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position 测量在垂直位置固态塑料比较燃烧特性的标准 Test info 测试内容： Test Clause Requirement conditioning 1) one set sample: conditioned at 23 ± 2°C and 50 ± 5 % relative humidity for not less than 48 h prior to test 2) the other set of sample: 1… -
BS EN 12586
d: 12 pieces of completed products. 样品要求 :全套样品12只. Turnaround time: Regular (9~12 working days). 所需时间: 标准(9~12个工作天). Others 其他信息： Sample for reference 参考图片: plastic mat -
BS EN 13209
Test item 测试名称： Child Care Articles - Baby Carriers - Safety Requirements and Test Methods 婴儿背带安全要求及测试方法 Test info 测试内容： BS EN 13209-1: Child Care Articles - Baby Carriers - Safety Requirements and Test Methods Part 1:Framed back carriers 婴儿背带安全要求及测试方法 第一部分：带外框的婴儿背带 Clause Test Requirement 5.3 Conditioning 5.4 Shrinkage 5.5 Monofil… -
GB 14749
Test item 测试名称： 婴儿学步车安全要求 Test info 测试内容： Clause Test Requirement 有毒元素测试 (GB 6675-03附录C) 可燃性测试 Remark: All materials and coatings in access zone need to be conducted Toxicity test. 所有小孩子能够接触到的材料和保护层都需要做有毒元素测试. All textile and plastic covering materials need to be conducted Flammability test. 所有纺织品和塑胶材料都需要做可燃性测试. Sample … -
SOR/86-962
Test item 测试名称： Cribs and Cradles Regulations 加拿大婴儿床及摇篮规章 Test info 测试内容： Clause Test Requirement Toxicity 有毒元素测试 (Canada Hazardous Products Act, 7 Toxic Elements Results) Flammability 可燃性测试 (ASTM D 1230) Remark: All materials and coatings in access zone need to be conducted Toxicity test. 所有小孩子能够接触到的材料和保护… -
XP S 54-041
Test item 测试名称： 儿童加高椅 Test info 测试内容： Clause Test Requirement Toxicity 有毒元素测试 (EN 71-3) Flammability 可燃性测试 (EN 71-2) and Document FD S 54-080 4 Properies of the materials used 4.1 Chemical properies 有毒元素测试 (EN 71-3) 4.2 Flammability 1. 可燃性测试 (NF EN 71-2); 2. Document FD S 54-080 4.3 Sweat resistance: NF ISO 105-A02 5 Characte… -
DIN EN 14404
Test item 测试名称: Knee protection by laying down requirements and test methods 护膝 Classification 分级: Type 1 knee protectors knee protectors that are independent of other clothing and fasten around the leg Type 2 knee protectors foam plastic or other padding material in pockets on trouser legs, or permanently attached to trousers NOTE … -
ASTM F 1148
Test item 测试名称: Home Playground Equipment 家用场地器械安全 这个产品是在家里用，并且是给18个月到 10 岁之间的小孩玩耍的 Test info 测试内容： 4.1 General new material documentation or testing program may submit for reviewing 4.1.1 Corrosion assistance treated(for metal)金属防腐处理 by testing or by claim wood treating 木材处理 by testing or by claim and verification Ultraviolet (UV) degrad… -
ASTM F 1487
Test item 测试名称: Playground Equipment for public use 公共用场地器械的安全 Test info 测试内容： 4 material and manufactuer 材料和加工 4.1 General 4.1.1 Corrosion assistance treated(for metal)金属防腐处理 wood treating 木材处理 Ultraviolet (UV) degradation (for plastic) 4.1.2 hazardous amounts of substances (ASTM F963) Lead in Paint (16CFR 1303) 4.1.3 wood treating 木材处理 4.2 f… -
ISO 5912
Test item 测试名称: Camping tents 野营帐篷 Test info 测试内容： Clause Test Requirement 6 Requirements 6.1.1 Fabrics and their connections 6.1.1.1 Tear resistance, breaking strength, resistance to penetration by water, weatherability 6.1.1.2 Dimensional stability 6.1.1.3 Flammability 6.1.2 Ground fastening 6.1.3 Protective measures 6.… -
BS 6206
BS 6206, 建筑用平板安全玻璃和安全塑料冲击性能测试 pecification for Impact Performance Requirements for Flat Safety Glass and Safety Plastics for Use in Building Scope: This standard specifies performance requirements and a test method in respect of energy absorption (impact) for flat safety glass and safety plastics for use in buildings. These requirements are intended to r… -
Australia Food Grade
Test item 测试名称: Australia Food Grade 澳洲食品等级 Test info 测试内容： Australia Food Grade 澳大利亚食品等级 Australia Food Grade , AS 2070 - Plastic ( PP, PE ….) 塑料件 Overall migration in distilled water Overall migration in 3 % acetic acid Overall migration in 50 % ethanol ( 默认用50%，客户要求可用10%ethanol 或其它 ) Overall migration in olive oil or substit… -
ASTM D 5338
测定受控合成条件下塑料材料曝气生物降解能力Norm refer 涉及标准: DIN V 54900 / ISO 14855-1 / ASTM D 5338 / GB/T 19277.1 Test info 测试内容: Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions -- Method by analysis of evolved carbon dioxide Sample size 送样规格: 3kg Lead time 测试周期：常规 Regular 45 … -
EN 15284
Test item 测试名称: Materials and articles in contact with food stuffs- Test method for the resistance to microwave heating of ceramic, glass, glass-ceramic or plastic cookware 能接触到食物的物料和产品—陶瓷，玻璃，玻璃陶瓷，塑料炊具的抗微波加热测试方法 Test info 测试内容: 根据标准要求的能量和实际微波炉的输出功率，根据公式算出short period和long period的具体时间。Short period的能量需要为72000J，Long period的能量需要为46800J，所需的测试时间… -
ISO 8124
Test item 测试名称: Australian/New Zealand Standard™ Safety of toys 澳洲（新西兰）国际玩具安全标准 Test info 测试内容: AS/NZS ISO 8124-1 Australian/New Zealand Standard Safety of Toys Part 1: Safety Aspects Related to Mechanical and Physical Properties(ISO 8124–1 MOD) 物理机械性测试 （a）Mouth – actuated Toys 口动玩具 （b）7000 Cycles Switch Test for Chest 玩具柜的7000次开关测… -
NZS 5820
Test item 测试名称: New Zealand Standard Safety of toys 新西兰玩具安全标准 Test info 测试内容: NZS 5820 – 1 Specification for The Safety of Toys: Physical and Mechanical Tests.NZS 5820 – 1 Specification for The Safety of Toys: Physical and Mechanical Tests.新西兰玩具安全 – 物理机械性能测试 NZS 5820 – 2 Specification for The Safety of Toys: Specific Material Te… -
Specific migration
Test item 测试名称: Specific migration 特殊迁移 Test info 测试内容: 1. Specific migration of melamine in 3% acetic acid 三聚氰胺特殊迁移 ( Melamine 密胺 ) 2. Specific migration of extractable formaldehyde 甲醛萃取特殊迁移 ( Melamine 密胺 ) 3. Specific migration of methacrylic acid in 3% acetic acid 聚甲基丙烯酸酸性迁移 ( for Acrylic 亚克力 ) 4. Specific migrati… -
Government and Trade Services
Test or certification item 测试或认证名称: Government and Trade Services 政府公共贸易服务 Test or certification info 测试和认证相关内容: Exporting countries 出口国： Saudi沙特 Certificate 证书：KSA PCP（CoC）/SASOThe exemption or control product 豁免或管制产品： 1、 Medicalsupplies; 2、 Food3;、 Militaryproducts; 4、 Saudisanitation and disinfection req… -
ASTM D 5526
Test Name 测试名称: Determining Anaerobic Biodegradation of Plastic Materials Under Accelerated Landfill Conditions 测定加速废渣填埋条件下塑料材料厌氧生物降解性的试验方法 Lead Time 测试周期: 常规 regular 80 working days Sample Size 送样规格: 20kg or 5000ml Others 其他信息: Sample Report 报告样本； -
Formulation analysis 配方分析
Test Name 测试名称: Formulation analysis ／Component Analysis 材质成分分析 （ 配方分析 ） Test Info 测试内容: Quantitative analysis 成分分析 盲测 Quantitative analysis 成分分析 - Oxide 氧化物 Spectrophotometric detection ( UV ) 分光光度计金属全成分检测 Component analysis for metal 塑料材质主成分定性分析 Quantitative analysis of major composition for plastic 塑料材质全成分定性分析 … -
BS 1877-10
Test Name 测试名称: Domestic Bedding Part 10 Specification for Mattresses and Dumpers for Children"s Cots, Perambulators and similar domestic Articles 童床、摇篮童车及类似家用物品规范 Test Info 测试内容: Test item 4. Materials and components 4.1 General 4.1 General assessment on sewing thread 4.2 Fillings 4.2 Fillings: Cleanliness of fillings: BS 1425-1 or BS … -
ASME
ASME是American Society of Mechanical Engineers（美国机械工程师协会）的英文缩写。ASME成立于1880年，是一个非营利性专业机构，旨在促进机械工程、多学科工程及相关科学的学术交流，科学技术和实际应用。ASME主要从事发展机械工程及其有关领域的科学技术，鼓励基础研究，促进学术交流，发展与其他工程学、协会的合作，开展标准化活动，制定机械规范和标准。 它拥有125000个成员，管理着全世界最大的技术出版署，主持每年30个技术会议，200个专业发展课程，并制订了许多工业和制造标准。 自成立以来，ASME领导了机械标准的发展，从最初的螺纹标准开始到现在已发展了超过600多个标准。ASME&nb… -
Swiss (SR 817.023.21)
Test item 测试名称: Swiss (SR 817.023.21) 瑞士食品等级 Test info 测试内容: General plastic( Swiss ----SR 817.023.21) Test item sample size TAT(workdays) Overall migration in distilled water 1pcs contact time<24h, 7d; contact time=24h,7d contact time>24h, 12d Overall migration in 3 % acetic acid 1pcs Overall migration in 50 % ethanol&… -
ANSI Z 97.1
ANSI Z 97.1 For safety glazing materilas used in buildings-safety performance specifications and methods of testANSI Z 97.1 建筑物用安全玻璃材料的安全性能规范和测试方法 Clause条款 Test Requirement测试要求 Test Standard测试标准 Sample requirement(mm)样品要求（毫米） TAT(working days）测试周期（工作日） Remark备注 For Laminated glass针对夹层玻璃 5.1 Impact Test冲击测试 ANSI Z97.1 1930x863mmClass B 457~470mm；4p…