Test item 测试名称: 
Flammability Test Procedure for Mattresses for Use in High Risk Occupancies 用于高危险居所的床垫测试
Test info 测试内容:
Test Clause Requirement
Testing of Mattresses 1) Weight Loss dut to combustion shall be less 3 pounds  in the first 10 min. 
2) The maximum rate of heat release shall be less 100kW.
3) The total heat release shall be less 25MJ in the first 10 min.
In addition to testing mattresses this test method may be used for any of the following bedding systems (According to Appendix E )
Test Clause Requirement
Testing of Bedding Systems (a) A mattress and foundation,
(b) A mattress with bed clothes,
(c) A mattress and foundation with bed clothes,
(d) Bed clothes only.
Sample size 送样规格:2 Actual mattresses for each test. 每个测试2个成品床垫。
Lead time 测试周期: 常规 Regular service 7 working days
Others 其他信息:
1.This test method is applicable only to the finished article of mattresses and other complete bedding systems and does not apply to testing of individual component materials used in the construction of bedding systems, such as ticking materials, foams, cotton battings, etc.
2.The public occupancies include, but are not limited to health care facilities, old age convalescent and board and care homes,  college dormitories and residence halls.
3. Ignition Source: Ignite the mattress specimen with a gas burner( commercial grade propane gas). 
4. The standard bed clothes used in tests with bed clothes will be two sheets, one pillow case, one acrylic blanket and one polyester filled pillow. The sheets and pillow case are either cotton or cotton/polyester. As an alternative, if a public building or facility has a prescribed or specified set of bed clothes, these may be substituted for the standard components described above.
5. When bed clothes alone is tested, a non-combustible substrate will be used as an inert mattress.
Sample for reference 参考图片:
Responsive image
Sample Report 报告样本:
Responsive imageResponsive imageResponsive imageResponsive imageResponsive imageResponsive image