HZLAB20250415返回 Back

土耳其

    Final Product  Fire hazard testing – Part 2-11: Glowing/hot-wire based test methods – Glow-wire ¬ammability
   test method for end-products (GWEPT) 		    TS EN 60695-2-11
    EN 60695-2-11
    IEC 60695-2-11
    Household and similar
    electrical appliances 		   Household and similar electrical appliances – Safety - Part 1: General requirements
   -Protection against accessing live parts
   -Input power and current
   -Leakage current and electrical resistance at operating temperature
   -Moisture resistance
   -Leakage current and electrical resistance
   -Mechanical strength
   - Heat and «re resistance
   -Annex A (For Information) Routine Experiments 		    TS EN 60335-1
    EN 60335-1
    IEC 60335-1

    Article 8
    Article 10
    Article 13
    Article 15
    Article 16
    Article 21
    Article 30.2.1
    Article 30.2.2
    Article 30.2.3
    Final Product    Test B: Dry heat     TS EN 60068-2-2
    EN 60068-2-2
    Final Product    Tests A: Cold     TS EN 60068-2-1
    EN 60068-2-1
    Final Product    Test Eh: Hammer tests     TS EN 60068-2-75
    EN 60068-2-75
    Final Product    Degrees of protection provided by enclosures (IP code) (For electrical equipments) tests     TS 3033
    EN 60529
    EN 60529/A1
    Final Product    Test S: Simulated solar radiation at ground level and guidance for solar radiation testing and
   weathering 		    TS EN 60068-2-5
    EN 60068-2-5
    Final Product    Tests Fc: Vibration (sinusoidal)     TS EN 60068-2-6
    EN 60068-2-6
    Final Product    Test Db: Damp heat, cyclic (12 h + 12 h cycle)     TS EN 60068-2-30
    EN 60068-2-30
    Final Product    Test Cab: Damp heat, steady state     TS EN 60068-2-78
    EN 60068-2-78
    Final Product Responsive image   Test Ea and guidance: Shock     TS EN 60068-2-27
    EN 60068-2-27
    Electricity metering Electricity metering equipment - General requirements, tests and test conditions - Part 11 :
    Metering equipment
    Applicable Tests
    -Power consumption 4.4
    -Repeatability 7.8
    -Meter constant 7.4
    -Immunity to electrostatic discharges 9.3.3
    -Initial start-up of the meter 7.5
    -Test of no-load condition 7.6
    -External static magnetic «elds 9.3.12
    -Power frequency magnetic «eld immunity test 9.3.13
    -Starting current test 7.7
    -Limits of error due to variation of the current 7.9
    -Test of time keeping accuracy 7.11
    -Vibration test (Test Fc) 5.2.2
    -Shock test (Test Ea) 5.2.1
    -Harmonics in the current and voltage
    circuits 5th harmonic test 9.4.2.2
    -Voltage variation 9.4.3
    -Ambient temperature variation 9.4.4
    -Interruption of phase voltage 9.4.5
    -Frequency variation 9.4.6
    -Reversed phase sequence 9.4.7
    -Auxiliary voltage variation 9.4.8
    -Operation of auxiliary devices 9.4.9
    -Self-heating 9.4.11
    -Dry heat test 8.3.3
    -Cold test 8.3.4
    -Damp heat, cyclic test 8.3.5 		    TS EN 62052-11
    EN 62052-11
    IEC 62052-11
    Applicable Tests
    Article 4.4
    Article 7.8
    Article 7.4
    Article 9.3.3
    Article 7.5
    Article 7.6
    Article 9.3.12
    Article 9.3.13
    Article 7.7
    Article 7.9
    Article 7.11
    Article 5.2.2
    Article 5.2.1
    Article 9.4.2.2
    Article 9.4.3
    Article 9.4.4
    Article 9.4.5
    Article 9.4.6
    Article 9.4.7
    Article 9.4.8
    Article 9.4.9
    Article 9.4.11
    Article 8.3.3
    Article 8.3.4
    Article 8.3.5
    Luminaires  Luminaires - Part 1: General requirements and tests     TS EN 60598-1
    EN 60598-1
    IEC 60598-1
    Electromagnetic
    compatibility 		    Electromagnetic compatibility (EMC) -- Part 4-2: Testing and measurement techniques -
    Electrostatic discharge immunity test 		    TS EN 61000-4-2
    EN 61000-4-2
    IEC 61000-4-2
    Electricity metering
    equipment 		    Electricity metering equipment - Particular requirements - Part 23: Static meters for reactive
    energy (classes 2 and 3)
    Applicable Tests
    -Repeatability 7.8
    -Meter constant 7.4
    -Initial start-up of the meter 7.5
    -Test of no-load condition 7.6
    -Starting current test 7.7
    -Limits of error due to variation of the current 7.9
    -Time-keeping accuracy 7.11
    -Climatic conditions 8 		    TS EN 62053-23
    EN 62053-23
    Applicable Tests
    Madde 7.8
    Madde 7.4
    Madde 7.5
    Madde 7.6
    Madde 7.7
    Madde 7.9
    Madde 7.11
    Madde 8
    Electricity metering
    equipment 		Responsive image    Electricity metering equipment - Particular requirements - Part 22: Static meters for AC active
    energy (classes 0, 1S, 0,2S and 0, 5S)
    Applicable Tests
    -Repeatability 7.8
    -Meter constant 7.4
    -Initial start-up of the meter 7.5
    -Test of no-load condition 7.6
    -Starting current test 7.7
    -Limits of error due to variation of the current 7.9
    -Time-keeping accuracy 7.11
    -Climatic conditions 8 		    TS EN 62053-22
    EN 62053-22
    Applicable Tests
    Article 7.8
    Article 7.4
    Article 7.5
    Article 7.6
    Article 7.7
    Article 7.9
    Article 7.11
    Article 8
    Electricity metering
    equipment 		Electricity metering equipment - Particular requirements - Part 21 : Static meters for AC active
    energy (classes 0, 5, 1 and 2)
    Applicable Tests
    -Repeatability 7.8
    -Meter constant 7.4
    -Initial start-up of the meter 7.5
    -Test of no-load condition 7.6
    -Starting current test 7.7
    -Limits of error due to variation of the current 7.9
    - Time-keeping accuracy 7.11
    - Climatic conditions 8 		    TS EN 62053-21
    EN 62053-21
    Applicable Tests
    Article 7.8
    Article 7.4
    Article 7.5
    Article 7.6
    Article 7.7
    Article 7.9
    Article 7.11
    Article 8
    Electricity metering
    equipment 		    Electricity metering equipment (a.c.) - Part 3: Particular requirements - Static meters for active
    energy (class indexes A, B and C)
    Applicable Tests
    -Repeatability 7.8
    - Meter constant 7.4
    - Initial start-up of the meter 7.5
    - Test of no-load condition 7.6
    - Starting current test 7.7
    - Allowable errors due to variation of the current 7.9
    - Allowable errors due to in¬uence quantities and disturbances 7.10
    -Time-keeping accuracy 7.11
    - Climatic conditions 8
    -Accuracy in the presence of harmonics 8.7.7.7 		    TS EN 50470-3
    EN 50470-3
    Applicable Tests
    Article 7.8
    Article 7.4
    Article 7.5
    Article 7.6
    Article 7.7
    Article 7.9
    Article 7.10
    Article 7.11
    Article 8
    Article 8.7.7.7
    Electricity metering
    equipment 		    Electricity metering equipment (a.c.) - Part 1: General requirements, tests and test conditions -
    Metering equipment (class indexes A, B, and C)
    Applicable Tests
    -Heating 7.2
    - Immunity to electrostatic discharges 7.4.5
    - Immunity to continuous magnetic «elds of external origin 7.4.11
    - Immunity to power frequency magnetic «elds of external origin 7.4.12
    -Dry heat test (Test B) 6.3.2
    - Cold test (Test A) 6.3.3
    -Damp heat, cyclic test (Test Db) 6.3.4
    -Vibration test (Test Fc) 5.2.2.3
    -Shock test (Test Ea) 5.2.2.2
    -Spring hammer test (Test Eh) 5.2.2.1
    -Protection against penetration of dust and water 5.9
    - Resistance to heat and «re 5.8 		    TS EN 50470-1
    EN 50470-1
    Applicable Tests
    Article 7.2
    Article 7.4.5
    Article 7.4.11
    Article 7.4.12
    Article 6.3.2
    Article 6.3.3
    Article 6.3.4
    Article 5.2.2.3
    Article 5.2.2.2
    Article 5.2.2.1
    Article 5.9
    Article 5.8
   Tested Materials / Products     Name of Test     Testing Method (National, International Standards, In-house Methods)
   Water Meters     Dry Heat Test (non-condensing)     EN ISO 4064-2:2017 Article 8.2
    OIML 49-2:2013 Article 8.2
    2004/22/AT MI-001
    2014/32/AB Annex 3 MI-001
    EN 14154-3:2005 Article 6.2.1
    75/33/AT Cold Water Meters
   Water Meters     Cold Test     EN ISO 4064-2:2017 Article 8.3
    OIML 49-2:2013 Article 8.3
    2004/22/AT MI-001
    2014/32/AB Annex 3 MI-001
    EN 14154-3:2005 Article 6.2.2
    75/33/AT Cold Water Meters
   Water Meters     Damp heat, cyclic (condensing)     ISO 4064-2 Article 8.4
    OIML R 49-1 Article 8.4
    TS EN 14154-3+A2 Article 6.2.3
   Water Meters     Flow disturbance tests     EN ISO 4064-2:2017 Article 7.10
    OIML 49-2:2013 Article 7.10
    2004/22/AT MI-001
    2014/32/AB Annex 3 MI-001
    EN 14154-3:2005 Article 5.9
    75/33/AT Cold Water Meters
   Water Meters     Overload water temperature test     EN ISO 4064-2:2017 Article 7.6
    OIML 49-2:2013 Article 7.6
    2004/22/AT MI-001
    2014/32/AB Annex 3 MI-001
    EN 14154-3:2005 Article 5.7
    75/33/AT Cold Water Meters
   Water Meters     Pressure Loss Test     TS EN ISO 4064-2: Article 7.9
    TS EN 14154-3+A1 Article 5.11
    Cold Water Meters Regulation 75/33/AT : Article 3.4
    2004/22/AT Measurement Devices Regulation: Annex MI-001
    2014/32/AB Measurement Devices Regulation: Annex-3 MI-001
   Water Meters     Static Pressure Test     TS EN ISO 4064-2: Article 7.3
    TS EN 14154-3+A1 Article 5.2
    Cold Water Meters Regulation 75/33/AT: Article 3.3
    2004/22/AT Measurement Devices Regulation : Annex MI-001
    2014/32/AB Measurement Devices Regulation : Annex-3 MI-001
    Water Meters Determination of intrinsic errors (of
    indication) 		    TS EN ISO 4064-2: Article 7.4
    TS EN 14154-3+A1 Article 5.4
    Cold Water Meters Regulation 75/33/AT: Article 2
    2004/22/AT Measurement Devices Regulation: Annex MI-001
    2014/32/AB Measurement Devices Regulation: Annex-3 MI-001
    Water Meters     Durability - Continuous Flow     ISO 4064-2 Article 7.11
    OIML R 49-1 Article 7.11
    TS EN 14154-3+A2 Article 5.13
    Water Meters     Absence of ¬ow test     ISO 4064-2 Article 8.17
    OIML R 49-1 Article 8.17
    TS EN 14154-3+A2 Article 5.5
    Water Meters     Water pressure test     ISO 4064-2 Article 7.7
    OIML R 49-1 Article 7.7
    TS EN 14154-3+A2 Article 5.8
    Water Meters     Reverse Flow Test     TS EN ISO 4064-2 Article 7.8
    OIML R 49-2 Article 7.8
    2014/32/AB Measurement Devices Regulation (MI-001)
    TS EN 14154-3+A2 Article 5.12
Measuring systems for continuous and dynamic
measurement of quantities of liquids other than water 		    Performance tests     OIML R 117
    OIML R 118
Measuring systems for continuous and dynamic
measurement of quantities of liquids other than water 		    Dry Heat (Non-Condensing) Test     OIML R 117
    OIML R 118
Measuring systems for continuous and dynamic
measurement of quantities of liquids other than water 		    Cold Test     OIML R 117
    OIML R 118
Measuring systems for continuous and dynamic
measurement of quantities of liquids other than water 		    Damp Heat, Cyclic (Condensing) Test     OIML R 117
    OIML R 118
    Heat Meters     Dry Heat Test (Non-Condensing)     TS EN 1434-4:2015 Article 7.5
    OIML R75-2:2002 Article 6.5
    2004/22/AT MI-004
    2014/32/AB Annex 6 MI-004
    Heat Meters Responsive image    Cold Test     TS EN 1434-4 Article 7.6
    OIML R75-2:2002 Article 6.6
    2004/22/AT MI004
    2014/32/AB Annex 6 MI004
    Heat Meters    Damp Heat, Cyclic Test(Condensing)     TS EN 1434-4:2015 Article 7.9
    OIML R75-2:2002 Article 6.9
    2004/22/AT MI004
    2014/32/AB Annex6 MI004
    Heat Meters     Determination of Indication errors test     TS EN 1434-5 Article 6
    Water Meters     Water Temperature Test     EN ISO 4064-2:2017 Article 7.5
    OIML 49-2:2013 Article 7.5
    2004/22/AT MI-001
    2014/32/AB Annex 3 MI-001
    EN 14154-3:2005 Article 5.6
    75/33/AT Cold Water Meters
    Water Meters     Durability - Discontinuous ¬ow test     ISO 4064-2 Article 7.11
    OIML R 49-1 Article 7.11
    TS EN 14154-3+A2 Article 5.13
    Water Meters     Static Magnetic Field Test (Magnet
    Test) 		    TS EN ISO 4064-2:2015
    2014/32/AB Measurement Devices Regulation (MI-001)
    Heat Meters     Performance tests     TS EN 1434-4:2015 Article 7.4
    OIML R75-2:2002 Article 6.4
    2004/22/AT MI-004
    2014/32/AB Annex 6 MI-004
    Heat Meters     Flow Disturbances     TS EN 1434-4:2015 Article 7.22
    2004/22/AT MI-004
    2014/32/AB Annex 6 MI-004
    Heat Meters     Internal Pressure     TS EN 1434-4:2015 Article 7.18
    OIML R75-2:2002 Article 6.16
    2004/22/AT MI-004
    2014/32/AB Annex 6 MI-004
    Heat Meters     Pressure Loss Test     TS EN 1434-4:2015 Article 7.19
    OIML R75-2:2002 Article 6.17
    2004/22/AT MI-004
    2014/32/AB Annex 6 MI-004
    Water Meters     Water meters for cold potable water and
    hot water - Part 2: Test methods 		    TS EN ISO 4064-2
    Cold and Hot Water Meters
    Flow Meter
    (DN 15-200) 		Responsive image    Changes in power supply
    (Interruption in battery supply) 		    EN ISO 4064-2 Article 8.5.4
    OIML 49-2 Article 8.5.4
    2004/22/EC MI-001
    (* It was repealed on 29.06.2016 but was temporarily included in the
    scope of accreditation upon the request of the organization.)
    2014/32/EU MI-001
    Cold Water Meter Directive 75/33/EC
    (* It was repealed on 07.08.2008 but was temporarily included in the
    scope of accreditation upon the request of the organization)
    (*This test is performed at the other location for DN50 and above
    meters.)
    Cold and Hot Water Meters
    Flow Meter
    (DN 15-200) 		Electrostatic discharge     EN ISO 4064-2 Article 8.11
    OIML 49-2 Article 8.11
    2004/22/EC MI-001
    (* It was repealed on 29.06.2016 but was temporarily included in the
    scope of accreditation upon the request of the organization.)
    2014/32/EU MI-001
    EN 14154-3+A2:2013 Article 6.3.1
    (* It was repealed on 18.02.2015 but was temporarily included in the
    scope of accreditation upon the request of the organization)
    Cold Water Meter Directive 75/33/EC
    (* It was repealed on 07.08.2008 but was temporarily included in the
    scope of accreditation upon the request of the organization)
    (*This test is performed at the other location for DN50 and above
    meters.)
    Heat Meters
    (DN 15-50) 		    Electrostatic discharge     TS EN 1434-4 Article 7.15
    OIML R75-2 Article 6.13
    2004/22/EC MI-004
    (* It was repealed on 29.06.2016 but was temporarily included in the
    scope of accreditation upon the request of the organization.)
    2014/32/EU MI-004
    (*This test is performed at the other location for DN50 and above
    meters.)

    Heat Meters
    (DN 15-50) 		    Static deviations in supply voltage     TS EN 1434-4 Article 7.7
    OIML R75-2 Article 6.7
    2004/22/EC MI-004
    (* It was repealed on 29.06.2016 but was temporarily included in the
    scope of accreditation upon the request of the organization.)
    2014/32/EU MI-004
    (*This test is performed at the other location for DN50 and above
    meters.)
    Cold and Hot Water Meters
    Flow Meter
    (DN 15-200) 		    Changes in power supply
    (Water meters powered by external DC
    voltage or by primary DC batteries) 		    EN ISO 4064-2 Article 8.5.3
    OIML 49-2 Article 8.5.3
    2004/22/EC MI-001
    (* It was repealed on 29.06.2016 but was temporarily included in the
    scope of accreditation upon the request of the organization.)
    2014/32/EU MI-001
    EN 14154-3+A2:2013 Article 6.4.5
    (* It was repealed on 18.02.2015 but was temporarily included in the
    scope of accreditation upon the request of the organization)
    Cold Water Meter Directive 75/33/EC
    (* It was repealed on 07.08.2008 but was temporarily included in the
    scope of accreditation upon the request of the organization)
    (*This test is performed at the other location for DN50 and above
    meters.)
    (*This test is performed at the other location for DN50 and above
    meters.)