HZLAB20250312返回 Back
| No. | Proficiency test |
Expected Start (quarter/2025) |
Return of the results |
||||||||
| AS2501-HB-a |
Hardness testing Brinell HBW 2,5/187,5, ASTM E10 |
III/2025 | 4 weeks | ||||||||
| AS2501-HB-b |
Hardness testing Brinell HBW 10/3000, ASTM E10 |
III/2025 | 4 weeks | ||||||||
| AS2501-HR |
Hardness testing Rockwell C, ASTM E18 |
III/2025 | 4 weeks | ||||||||
| AS2501-HV-a |
Hardness testing Vickers HV 1, ASTM E384 |
III/2025 | 4 weeks | ||||||||
| AS2501-HV-b |
Hardness testing Vickers HV 10/HV 30, ASTM E92 |
III/2025 | 4 weeks | ||||||||
| AS2509-RM |
Tensile test steel round specimens, ASTM E8/E8M, machined specimens |
IV/2025 | 4 weeks | ||||||||
| AS2509-RU |
Tensile test steel round specimens, ASTM E8/E8M, unmachined specimens |
IV/2025 | 4 weeks | ||||||||
| AS2509-RWM |
Tensile test steel round specimens, 200°C ASTM E21, machined specimens |
IV/2025 | 4 weeks | ||||||||
| AS2509-RWU |
Tensile test steel round specimens, 200°C ASTM E21, unmachined specimens |
IV/2025 | 4 weeks | ||||||||
| AS2510FM |
Tensile test steel flat specimens, ASTM E8/E8M, 1-3 mm, machined specimens |
IV/2025 | 4 weeks | ||||||||
| AS2510FU |
Tensile test steel flat specimens, ASTM E8/E8M, 1-3 mm, unmachined specimens |
IV/2025 | 4 weeks | ||||||||
| AS2510-Mo |
Tensile test molybdenum flat specimens, ASTM E8/E8M (ASTM B 386), machined specimens |
II/2025 | 4 weeks | ||||||||
| AS2511-LM |
Charpy impact test low level, ASTM E23, machined specimens |
IV/2025 | 4 weeks | ||||||||
| AS2511-MM |
Charpy impact test average level, ASTM E23, machined specimens |
IV/2025 | 4 weeks | ||||||||
|
AS2511-HM -25°C |
Charpy impact test high level, ASTM E23, machined specimens, -25°C |
IV/2025 | 4 weeks | ||||||||
| AS2511-HM |
Charpy impact test high level, ASTM E23, machined specimens |
IV/2025 | 4 weeks | ||||||||
| AS2511-SM |
Charpy impact test super high level, ASTM E23, machined specimens |
IV/2025 | 4 weeks | ||||||||
| AS2511-LU |
Charpy impact test low level, ASTM E23, unmachined specimens |
IV/2025 | 4 weeks | ||||||||
| AS2511-MU |
Charpy impact test average level, ASTM E23, unmachined specimens |
IV/2025 | 4 weeks | ||||||||
|
AS2511-HU -25°C |
Charpy impact test high level, ASTM E23, unmachined specimens, -25°C |
IV/2025 | 4 weeks | ||||||||
| AS2511-HU |
Charpy impact test high level, ASTM E23, unmachined specimens |
IV/2025 | 4 weeks | ||||||||
| AS2511-SU |
Charpy impact test super high level, ASTM E23, unmachined specimens |
IV/2025 | 4 weeks | ||||||||
| 2501-HB-a | Hardness testing Brinell HBW 2,5/187,5 | III/2025 | 4 weeks | ||||||||
| 2501-HB-b | Hardness testing Brinell HBW 10/3000 | III/2025 | 4 weeks | ||||||||
| 2501-HR | Hardness testing Rockwell C | III/2025 | 4 weeks | ||||||||
| 2501-HV-a | Hardness testing Vickers HV 1 | III/2025 | 4 weeks | ||||||||
| 2501-HV-b | Hardness testing Vickers HV 10/HV 30 | III/2025 | 4 weeks | ||||||||
| 2503L | Emission spectrometry low alloyed steel | II/2025 | 4 weeks | ||||||||
| 2503U | Emission spectrometry unalloyed steel | II/2025 | 4 weeks | ||||||||
| 2504Al | Emission spectrometry Aluminium-alloy | II/2025 | 4 weeks | ||||||||
| 2504CuZn | Emission spectrometry Brass-alloy | II/2025 | 4 weeks | ||||||||
| 2505 | Resistance to intergranular corrosion | III/2025 | 4 weeks | ||||||||
| 2506 | Indirect verification of salt spray test chamber | II/2025 | 4 weeks | ||||||||
| 2507-RAlM |
Tensile test aluminium, round specimens machined specimens |
III/2025 | 4 weeks | ||||||||
| 2507-RAlU |
Tensile test aluminium, round specimens unmachined specimens |
III/2025 | 4 weeks | ||||||||
| 2507-FAlM |
Tensile test aluminium, flat specimens machined specimens |
III/2025 | 4 weeks | ||||||||
| 2507-FAlU |
Tensile test aluminium, flat specimens unmachined specimens |
III/2025 | 4 weeks | ||||||||
| 2508-UT | UT- wall thickness and flaws | II/2025 | 1 week | ||||||||
| 2508-VT | VT | II/2025 | 1 week | ||||||||
|
2508-UT- PA |
UT weld using phased array | II/2025 | 1 week | ||||||||
| 2509-RM |
Tensile test steel round specimens machined specimens |
IV/2025 | 4 weeks | ||||||||
| 2509-RU |
Tensile test steel round specimens unmachined specimens |
IV/2025 | 4 weeks | ||||||||
| 2509-BST | Tensile test reinforcement bars | III/2025 | 4 weeks | ||||||||
| 2509-RWM |
Tensile test steel, 200°C, round specimens machined specimens |
II/2025 | 4 weeks | ||||||||
| 2509-RWU |
Tensile test steel, 200°C, round specimens unmachined specimens |
II/2025 | 4 weeks | ||||||||
| 2510FM |
Tensile test steel flat specimens, 1-3 mm machined specimens |
IV/2025 | 4 weeks | ||||||||
| 2510FU |
Tensile test steel flat specimens, 1-3 mm unmachined specimens |
IV/2025 | 4 weeks | ||||||||
| 2511-LM |
Charpy impact test low level machined specimens |
IV/2025 | 4 weeks | ||||||||
| 2511-MM |
Charpy impact test average level machined specimens |
||||||||||
|
2511-HM -25°C |
Charpy impact test high level machined specimens, -25C° |
||||||||||
| 2511-HM |
Charpy impact test high level machined specimens |
||||||||||
| 2511-SM |
Charpy impact test super high level machined specimens |
||||||||||
| 2511-LU |
Charpy impact test low level unmachined specimens |
IV/2025 | 4 weeks | ||||||||
| 2511-MU |
Charpy impact test average level unmachined specimens |
||||||||||
|
2511-HU -25°C |
Charpy impact test high level unmachined specimens, -25C° |
||||||||||
| 2511-HU |
Charpy impact test high level unmachined specimens |
||||||||||
| 2511-SU |
Charpy impact test super high level unmachined specimens |
||||||||||
| 2513 | Metallography, image analysis | III/2025 | 4 weeks | ||||||||
| 2513-MA | Metallography, macro analysis | III/2025 | 4 weeks | ||||||||
| 2513-NMI | Metallography, non-metallic inclusions | III/2025 | 4 weeks | ||||||||
| 2514 | Metallography, sample preparation | III/2025 | 4 weeks | ||||||||
| 2515 | Roughness measurement | III/2025 | 4 weeks | ||||||||
| 2520 | Length measurement | III/2025 | 4 weeks | ||||||||
| 2530 | CTOD test | III/2025 | 4 weeks | ||||||||
| 2541-SD | Coating thickness, Magnetic method | III/2025 | 4 weeks | ||||||||