HZLAB20221128返回 Back
中国
| Physical | |
| 40 CFR Part 770 Title VI (EPA) | Formaldehyde Concentrations in Air from Composite Wood Products |
| ANSI A118.10 | (Section 5.3 and 5.4 only) |
| ANSI 208.1 | Particleboard |
| ANSI 208.2 | Medium Density Fiberboard(MDF) for Interior Applications |
| ANSI/KCMA A161.1 | Performance And Construction Standard For Kitchen And Vanity Cabinets |
| AS/NZS 1080.1 | Timber - methods of test method 1: Moisture content |
| AS/NZS 1328.1 | Glued laminated structural timber Part 1: Performance requirements and minimum production rquirements |
| AS/NZS 1577 | Scaffold decking components |
| AS/NZS 1604.4 | Specification for preservative treatment - Laminated veneer lumber (LVL) |
| AS/NZS 1860.1 | Particleboard flooring Part 1: Specifications |
| AS/NZS 2098.1 | Methods of test for veneer and plywood - Moisture content of veneer and plywood |
| AS/NZS 2098.2 | Methods of test for veneer and plywood - Bond quality of plywood (chisel test) |
| AS/NZS 2098.3 | Methods of test for veneer and plywood method 3: Bond quality and strength of scaft joints in plywood |
| AS/NZS 2098.4 | Methods of test for veneer and plywood method 4: measurement of dimensions and shapes for sheets of veneer and plywood |
| AS/NZS 2269.0 | Plywood—Structural, Part 0: Specifications |
| AS/NZS 2269.1 | Plywood – Structural Part 1: Determination of structuralproperties – Test methods |
| AS/NZS 2269.2 | Plywood—Structural, Part 2: Determination of structural properties—Evaluation methods. |
| AS/NZS 2271 | Plywood and blockboard for exterior use |
| AS/NZS 2588 | Gypsum plasterboard |
| AS/NZS 4063.1 | Characterization of structural timber Part 1: Test methods (Except 2.5, 2.6, 2.9 and 2.10) |
| AS/NZS 4063.2 | Characterization of structural timber Part 2: Determination of Characteristic values |
| AS/NZS 4266.1 | Reconstituted wood-based panels— Methods of testing Part 1:Base panels |
| AS/NZS 4266.2 | Reconstituted wood-based panels-Methods of testing Part 2:Decorative overlaid panels |
| AS/NZS 4266.3 | Reconstituted wood-based panels-Methods of test - Method 3:Moisture content |
| AS/NZS 4266.4 | Reconstituted wood-based panels-Methods of test - Method 4:Density |
| AS/NZS 4266.5 | Reconstituted wood-based panels-Methods of test - Method 5:Modulus of elasticity in bending and bending strength |
| AS/NZS 4266.6 | Reconstituted wood-based panels-Methods of test - Method 6:Tensile strength perpendicular to the plane of the panel (internal bond strength) |
| AS/NZS 4266.7 | Reconstituted wood-based panels-Methods of test - Method 7:Surface soundness |
| AS/NZS 4266.8 | Reconstituted wood-based panels-Methods of test - Method 8:Swelling in thickness after immersion in water |
| AS/NZS 4266.9 | Reconstituted wood-based panels-Methods of test - Method 9:Thickness stability and glue bond quality |
| AS/NZS 4266.10 | Reconstituted wood-based panels-Methods of test - Method 10:Wet bending strength after immersion in water at 70 degrees Cor boiling temperature |
| AS/NZS 4266.11 | Reconstituted wood-based panels-Methods of test - Method 11:Moisture resistance under cyclic test conditions |
| AS/NZS 4266.12 | Reconstituted wood-based panels-Methods of test - Method 12:Surface water absorption |
| AS/NZS 4266.13 | Reconstituted wood-based panels-Methods of test - Method 13:Resistance to axial withdrawal of screws |
| AS/NZS 4266.14 | Reconstituted wood-based panels-Methods of test - Method 14:Dimensional changes associated with changes in relative humidity |
| AS/NZS 4266.16 | Reconstituted wood-based panels-Methods of test - Method 16:Formaldehyde emission – desiccator method |
| AS/NZS 4266.19 | Reconstituted wood-based panels-Methods of test - Method 19:Assessing appearance of melamine overlaid panels |
| AS/NZS 4266.20 | Reconstituted wood-based panels-Methods of test - Method 20:Resistance to surface abrasion (Taber Abrasion test) |
| AS/NZS 4266.21 | Reconstituted wood-based panels-Methods of test - Method 21:Over-cure or under-cure of resin |
| AS/NZS 4266.22 | Reconstituted wood-based panels-Methods of test - Method 22:Porosity of laminated surface |
| AS/NZS 4266.23 | Reconstituted wood-based panels-Methods of test - Method 23:Resistance to steam |
| AS/NZS 4266.24 | Reconstituted wood-based panels-Methods of test - Method 24:Resistance to cracking |
| AS/NZS 4266.25 | Reconstituted wood-based panels-Methods of test - Method 25:Resistance to staining |
| AS/NZS 4266.26 | Reconstituted wood-based panels-Methods of test - Method 26:Resistance to dry heat |
| AS/NZS 4266.27 | Reconstituted wood-based panels-Methods of test - Method 27:Resistance to impact |
| AS/NZS 4266.28 | Reconstituted wood-based panels-Methods of test - Method 28:Bond strength of PVC films |
| AS/NZS 4266.29 | Reconstituted wood-based panels-Methods of test - Method 29:Heat resistance of PVC films |
| AS/NZS 4266.30 | Reconstituted wood-based panels-Methods of test - Method 30:Moisture resistance of finished foils |
| AS/NZS 4266.31 | Reconstituted wood-based panels-Methods of test - Method 31:Adhesion of paper foils by the crosscut test |
| AS/NZS 4266.32 | Reconstituted wood-based panels-Methods of test - Method 32:Veneer bond strength |
| AS/NZS 4266.33 | Reconstituted wood-based panels-Methods of test - Method 33:Veneer bond durability |
| AS/NZS 4357.1 | Structural laminated veneer lumber - Method of test for measurement of dimensions and shape |
| ASTM A90 | Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings |
| ASTM A153 | Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware |
| ASTM C97 | Standard Test Methods for Absorption and Bulk Specific Gravity of Dimension Stone |
| ASTM C99 | Standard Test Method for Modulus of Rupture of Dimension Stone |
| ASTM C170 | Standard Test Method for Compressive Strength of Dimension Stone |
| ASTM C203 | Standard Test Methods for Breaking Load and Flexural Properties of Block-Type Thermal Insulation |
| ASTM C241 | Standard Test Method for Abrasion Resistance of Stone Subjected to Foot Traffic |
| ASTM C373 | Standard Test Methods for Determination of Water Absorption and Associated Properties by Vacuum Method for Pressed Ceramic Tiles and Glass Tiles and Boil Method for ExtrudedCeramic Tiles and Non-tile Fired Ceramic Whiteware Products |
| ASTM C482 | Standard Test Method for Bond Strength of Ceramic Tile to Portland Cement Paste(Section 9.8 only) |
| ASTM C503 | Standard Specification for Marble Dimension Stone |
| ASTM C615 | Standard Specification for Granite Dimension Stone |
| ASTM C648 | Standard Test Method for Breaking Strength of Ceramic Tile |
| ASTM C880 | Standard Test Method for Flexural Strength of Dimension Stone |
| ASTM C847 | Standard Specification for Metal Lath |
| ASTM C1064 | Standard Test Method for Temperature of Freshly Mixed Hydraulic-Cement Concrete |
| ASTM C1693 | Standard Specification for Autoclaved Aerated Concrete (AAC)(Section 6 to 8 only) |
| ASTM C1694 | Standard Specification for Reinforced Autoclaved Aerated Concrete (AAC) Elements(Section 5.1 to 5.3, Section 5.7 and Section 8 only) |
| ASTM D570 | Standard Test Method for Water Absorption of Plastics |
| ASTM D1621 | Standard Test Method for Compressive Properties of Rigid Cellular Plastics |
| ASTM D1623 | Standard Test Method for Tensile and Tensile Adhesion Properties of Rigid Cellular Plastics |
| ASTM D4060 | Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser |
| ASTM E1333 | Standard Test Method for Determining Formaldehyde Concentrations in Air and Emission Rates from Wood Products Using a Large Chamber |
| ASTM F970 | Standard Test Method for Measuring Recovery Properties of Floor Coverings after Static Loading |
| ASTM F1667 | Standard Specification for Driven Fasteners: Nails, Spikes, and Staples |
| ASTM F1914 | Standard Test Methods for Short-Term Indentation and Residual Indentation of Resilient Floor Covering |
| ASTM F2199 | Standard Test Method for Determining Dimensional Stability and Curling Properties of Resilient Flooring after Exposure to Heat |
| EN 13986 | Wood-based Panels For Use In Construction - Characteristics, Evaluation Of Conformity And Marking (Sections 5.3 to 5.6, 5.9,5.17) |
| EN 14080 | Timber structures — Glued laminated timber and glued solid timber — Requirements |
| GB/T 17657 | Test methods of evaluating the properties of wood-based panels and surface decorated wood-based panels (Sections 4.1 to 4.6, 4.56 to 4.57). |
| GB/T 37315 | Basic Requirements of Bond Performance of Adhesives of Timber Structure |
| IAMPO PS106 | Tileable shower receptors and shower kits (Sections 4.1.2, 4.9,5.3 and 5.8 only) |
| Environmental | |
| AS/NZS 2098.11 | Methods of Test for Veneer and Plywood, Method 11:Determination of Formaldehyde Emissions for Plywood |
| AS/NZS 2754.1 | Adhesives for timber and timber products - Adhesives for manufacture of plywood and laminated veneer lumber (LVL) |
| AS/NZS 4357.4 | Structural laminated veneer lumber - Determination of formaldehyde emissions |
| ASTM B117 | Standard Practice for Operating Salt Spray (Fog) Apparatus |
| ASTM C1694 | Standard Specification for Reinforced Autoclaved Aerated Concrete (AAC) Elements(Section 5.5 and Section 7 only) |
| ASTM D610 | Standard Practice for Evaluating Degree of Rusting on Painted Steel Surfaces |
| ASTM D2559 | Standard Specification for Adhesives for Bonded Structural Wood Products for Use Under Exterior Exposure Conditions |
| ASTM D3434 | Standard Test Method for Multiple-Cycle Accelerated Aging Test (Automatic Boil Test) for Exterior Wet Use Wood Adhesives |
| ASTM D4442 | Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Based Materials |
| ASTM D5116 | Standard Guide for Small-Scale Environmental Chamber Determinations of Organic Emissions from Indoor Materials/Products |
| ASTM D5582 | Standard Test Method for Determining Formaldehyde Levels from Wood Products Using a Desiccator |
| ASTM D6007 | Standard Test Method for Determining Formaldehyde Concentrations in Air from Wood Products Using a Small-Scale Chamber |
| ASTM D6330 | Standard Practice for Determination of Volatile Organic Compounds (Excluding Formaldehyde) Emissions from Wood Based Panels Using Small Environmental Chambers Under Defined Test Conditions |
| ASTM D6670 | Standard Practice for Full-Scale Chamber Determination of Volatile Organic Emissions from Indoor Materials/Products |
| ASTM D6803 | Standard Practice for Testing and Sampling of Volatile Organic Compounds (Including Carbonyl Compounds) Emitted from Paint Using Small Environmental Chambers |
| ASTM G85 | Standard Practice for Modified Salt Spray (Fog) Testing |
| ASTM G154 | Standard Practice for Operating Fluorescent Ultraviolet (UV)Lamp Apparatus for Exposure of Nonmetallic Materials |
| BS EN 300 | Oriented Strand Boards (OSB) -Definitions, Classification and Specifications |
| BS EN 312 | Particleboards — Specifications |
| BS EN 314-1 | Plywood - Bonding quality - Test methods |
| BS EN 317 | Particleboards and Fiberboards-Determination of Swelling in thickness after immersion in water. |
| BS EN 319 | Particleboards and Fiberboards-Determination of tensile strength perpendicular to the plane of the board. |
| BS EN 321 | Wood-based panels-Determination of moisture resistance under cyclic test conditions |
| BS EN 322 | Wood-based panels-Determination of moisture content |
| BS EN 324-1 | Wood-based panels-Determination of dimensions of board-Part 1: Determination of thickness, width and length |
| BS EN 622-1 | Fiberboards-Specifications-Part 1: General requirements. |
| BS EN 622-2 | Fiberboards-Specifications -Part 2: Requirements for hardboards |
| BS EN 622-3 | Fiberboards-Specifications-Part 3: Requirements for medium board |
| BS EN 622-4 | Fibreboards —Specifications Part 4: Requirements for softboards |
| BS EN 636 | Plywood — Specifications |
| BS EN 717-1 | Acoustics - Rating Of Sound Insulation In Buildings And Of Building Elements - Part 1: Airborne Sound Insulation |
| BS EN 1087-1 | Particleboards-Determination of moisture resistances-Part 1: Boil test |
| BS EN 1534 | Wood flooring —Determination of resistance to indentation — Test method |
| BS EN 12460-3 | Wood-Based Panels - Determination Of Formaldehyde Release - Part 3: Gas Analysis Method |
| BS EN 12460-4 | Wood-Based Panels - Determination Of Formaldehyde Release - Part 4: Desiccator Method |
| BS EN 12460-5 | Wood-Based Panels - Determination Of Formaldehyde Release - Extraction Method (Called The Perforator Method) |
| BS EN 13183-1 | Moisture content of a piece of swan timber-Part 1: Determination by oven dry method |
| BS EN 13329 | Laminate floor coverings— Elements with a surface layer based on aminoplastic thermosetting resins—Specifications,requirements and test methods |
| BS EN 16000-9 | Indoor air - Determination of the emission of volatile organic Compounds from building products and furnishing - Emission test chamber method |
| BS EN 16516 | Construction products: Assessment of release of dangerous substances - Determination of emissions into indoor air |
| EN ISO 10580 | Resilient, Textile And Laminate Floor Coverings - Test Method For Volatile Organic Compound (Voc) Emissions |
| EN 120 | Plastics - Phenol-formaldehyde Mouldings - Determination Of Free Ammonia And Ammonium Compounds - Colorimetric Comparison Method |
| EN 310 | Wood-based panels-Determination of modulus of elasticity in bending and by bending strength |
| EN 13986 | Wood-based Panels for use in Construction - Characteristics,Evaluation Of Conformity and Marking (Section 5.7) |
| GB 18580 | Indoor decorating and refurbishing materials – Limit of formaldehyde emission of wood based panels and finishing products |
| GB 18584 | Indoor decorating and refurbishing materials – Limit of harmful substances of wood based furniture |
| GB 18587 | Indoor decorating and refurbishing materials – Limitations of harmful substances emitted from carpets, carpet cushions and adhesives |
| GB 50325 | Code for indoor environmental pollution control of civil building engineering |
| GB/T 10125 | Corrosion tests in artificial atmospheres – Salt spray tests |
| GB/T 16422.3 | Plastics – Methods of exposure to laboratory light sources – Part 3:Fluorescent UV lamps |
| GB/T 17657 | Test methods of evaluating the properties of wood-based panels and surface decorated wood-based panels (Sections 4.13 to 4.19, 4.26, 4.28, 4.30 to 4.50, 4.52 and 4.58 to 4.61 only) |
| GB/T 28489 | Limits of hazardous substances for musical instruments |
| GB/T 29899 | Determination of the emission of volatile organic compounds from wood-based panels and furnishing – Small chamber method |
| GB/T 31107 | Environmental chamber for the determination of volatile organic compounds of furniture - General technical requirements |
| ISO 12219-4 | Interior air of road vehicles - Part 4: Method for the determination of the emissions of volatile organic compounds from vehicle interior parts and materials - Small chamber method |
| ISO 12460-1 | Wood-based panels - Determination of formaldehyde release -Part 1: Formaldehyde emission by the 1-cubic-metre chamber method |
| JIS A 1460 | Determination Of The Emission Of Formaldehyde From Building Boards - Desiccator Method |
| JIS A 1901 | Determination Of The Emission Of Volatile Organic Compounds And Aldehydes By Building Products - Small Chamber Method |
| Structural | |
| AISI S904 | Standard Test Methods for Determining the Tensile and Shear Strengths of Screws |
| AISI S905 | Test methods for mechanically fastened cold-formed steel connections |
| AITC T200 | Manufacturing Quality Control Systems Manual for Structural Glued Laminated Timber (AITC 107, Shear test, AITC Test T110, Cyclic Delamination Test and AITC Test T119, Full Size End Joint Tension Test |
| ANSI 405 | Standard for Adhesives for Use in Structural Laminated Timber |
| ANSI/HPVA EF | American National Standard for Engineered Wood Flooring |
| ANSI/HPVA HP-1-2016 | Hard wood and decorative wood (Only sections 4.4, 4.5 and 4.6) |
| ANSI/NALFA LF01 | Laminate flooring - specifications and test methods |
| APA PS-1 | Structural Plywood |
| APA PS-2 | Performance standard for wood-based structural use panels |
| AS 1649 | Timber—Methods of test for mechanical fasteners and connectors—Basic working loads and characteristic strengths |
| AS 6669 | Plywood—Formwork |
| AS/NZS 1577 | Scaffold decking components |
| AS/NZS 4357.0 | Structural laminated veneer lumber - Specifications |
| AS/NZS 4357.2 | Structural laminated veneer lumber (LVL) - Determination of structural properties - Test methods |
| AS/NZS 4357.3 | Structural laminated veneer lumber (LVL) - Determination of structural properties - Evaluation methods |
| ASTM A370 | Standard Test Methods and Definitions for Mechanical Testing of Steel Products |
| ASTM C954 | Standard Specification for Steel Drill Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Steel Studs from 0.033 in. (0.84 mm) to 0.112 in. (2.84 mm) in Thickness |
| ASTM C1002 | Standard Specification for Steel Self-Piercing Tapping Screws for Application of Gypsum Panel Products or Metal Plaster Bases to Wood Studs or Steel Studs |
| ASTM C1513 | Standard Specification for Steel Tapping Screws for Cold-Formed Steel Framing Connections |
| ASTM D1037 | Standard Test Methods for Evaluating Properties of Wood-Base Fiber and Particle Panel Materials |
| ASTM D1151 | Standard Practice for Effect of Moisture and Temperature on Adhesive Bonds |
| ASTM D1183 | Standard Practices for Resistance of Adhesives to Cyclic Laboratory Aging Conditions |
| ASTM D1761 | Standard Test Methods for Mechanical Fasteners in Wood |
| ASTM D1990 | Standard Practice for Establishing Allowable Properties for Visually-Graded Dimension Lumber from In-Grade Tests of Full Size Specimens |
| ASTM D2395 | Standard Test Methods for Density and Specific Gravity (Relative Density) of Wood and Wood-Based Materials |
| ASTM D2559 | Standard Specification for Adhesives for Bonded Structural Wood Products for Use Under Exterior Exposure Conditions |
| ASTM D3043 | Standard Test Methods for Structural Panels in Flexure |
| ASTM D3434 | Standard Test Method for Multiple-Cycle Accelerated Aging Test (Automatic Boil Test) for Exterior Wet Use Wood Adhesives |
| ASTM D4442 | Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Based Materials |
| ASTM D4444 | Standard Test Method for Laboratory Standardization and Calibration of Hand-Held Moisture Meters |
| ASTM D5456 | Standard Specification for Evaluation of Structural Composite Lumber Products |
| ASTM D7031 | Standard Guide for Evaluating Mechanical and Physical Properties of Wood-Plastic Composite Products |
| ASTM D7032 | Standard Specification for Establishing Performance Ratings for Wood-Plastic Composite and Plastic Lumber Deck Boards, Stair Treads, Guards, and Handrails |
| ASTM D7247 | Standard Test Method for Evaluating the Shear Strength of Adhesive Bonds in Laminated Wood Products at Elevated Temperatures |
| ASTM E18 | Standard Test Methods for Rockwell Hardness of Metallic Materials |
| ASTM E72 | Standard Test Methods of Conducting Strength Tests of Panels for Building Construction |
| ASTM F1575 | Standard Test Method for Determining Bending Yield Moment of Nails |
| BS EN 13489:2002 | Wood flooring —Multi-layer parquet elements |
| BS EN 13647:2011 | Wood flooring and wood paneling and cladding —Determination of Geometrical characteristics |
| CSA O112.9 | Evaluation of adhesives for structural wood products (exterior exposure) (Section 4.10.2 Creep Resistance Test only) |
| EN 323 | Wood-based panels -Determination of density |
| EN-324 | Wood-based panels-Determination of dimensions of board-Part 2: Determination of squareness and edge straightness |
| EN 622-5 | Fibreboards - Specifications Part 5: Requirements for dry process boards (MDF) |
| EN 13986 | Wood-based Panels For Use In Construction - Characteristics,Evaluation Of Conformity And Marking (Sections 5.1 to 5.2, 5.13 to 5.15) |
| GB/T 17657 | Test methods of evaluating the properties of wood-based panels and surface decorated wood-based panels (Sections 4.7 to 4.12,4.20 to 4.25, 4.51) |
| GB/T 18102-2007 | Laminate flooring (Except sections 6.3.8, 6.3.13 and 6.3.18) |
| GB/T 18103 | Engineered wood flooring |
| GB/T 20241 | Laminated veneer lumber |
| GB/T 24137 | Wood-plastic composite decorative boards |
| GB/T 24508 | Wood-plastic composite flooring |
| ICC-ES AC07 | Acceptance Criteria for Special Roofing Systems(Section 3.2.6and Section 4.9 only) |
| ICC ES AC70 | Power actuated fasteners driven into concrete, steel and masonry elements (test methods found in sections 3.1.3, 3.1.4,3.3.5 and 4.0) |
| ICC ES AC116 | Nails (test methods found in sections 3.0 and 4.0 except Section 3.3.1.2) |
| ICC ES AC118 | Tapping Screw Fasteners (test methods found in sections 3.0 and 4.0 except Section 3.1.1.1) |
| ICC ES AC174 | Deck board span ratings and guardrail systems (guards and handrails) (test methods found in sections 3.0, 4.0 and 5.0) |
| ICC ES AC257 | Corrosion resistant fasteners and evaluation of corrosion effects of wood treatment chemicals (test methods found in sections 3.1.3, 3.1.8, 4.1.7, 4.3 and 4.5 only) |
| ICC-ES AC365 | Acceptance Criteria for Building-integrated Photovoltaic(BIPV)Roof Covering Systems(Section 3.4.6 and Section 4.2 only) |