澳大利亚
PPE Standards
ANSI Z359.1 The Fall Protection Code
ANSI Z359.4 Safety Requirements For Assisted-rescue And Self-rescue Systems, Subsystems And Components
ANSI Z87.1 Eye Safety & Eye Protection Glasses
AS 1609 Eye protectors for motor cyclists and racing car drivers
AS 1891.3 Personal equipment for work at height Manufacturing requirements for fall arrest devices
AS 1891.5 Personal equipment for work at height Manufacturing requirements for lanyard assemblies and pole straps
AS 1900 Flotation aids for water familiarization and swimming tuition
AS 2210.2 Personal protective equipment Test methods for footwear
AS 2210.3 Personal protective equipment Safety footwear
AS 2210.5 Personal protective equipment Occupational footwear
AS 2210.3 Personal protective equipment Safety footwear (ISO 20345:2011, MOD)
AS 2210.5 Personal protective equipment Occupational footwear (ISO 20347:2012, MOD)
AS 2225 Insulating gloves for electrical purposes
AS 2227 Yachting harnesses and lines – Conventional lines
AS 4067 Protective helmets for structural firefighting
AS 4381 Single use face masks for use in health care
AS 4399 Sun Protective Clothing – Evaluation and Classification
AS 4758.1 Personal flotation devices – General requirements Information Document
AS ISO 10651.3 Lung ventilators for medical use – Particular requirements for emergency and transport ventilators
AS ISO 12312.2 Eye and face protection – Sunglasses and related eyewear Filters for direct observation of the sun
AS/NZS 1020 The control of undesirable static electricity
AS 1067.1 Eye and face protection – Sunglasses and fashion spectacles Requirements
AS/NZS 1270 Acoustics – Hearing protectors
AS/NZS 1337 Eye protectors for industrial applications
AS/NZS 1337.1 Personal eye protection Eye and face protectors for occupational applications
AS/NZS 1337.2 Personal eye protection Mesh eye and face protectors for occupational applications
AS/NZS 1337.4 Eye-protection – Filters and eye-protectors against laser radiation (laser eye-protectors)
AS/NZS 1337.5 Personal eye-protection – Eye-protectors for adjustment work on lasers and laser systems (laser adjustment eye-protectors)
AS/NZS 1337.6 Personal eye protection Prescription eye protectors against low and medium impact
AS/NZS 1338.1 Filters for eye protectors – Filters for protection against radiation generated in welding and allied operations
AS/NZS 1338.2 Filters for eye protectors Filters for protection against ultraviolet radiation
AS/NZS 1338.3 Filters for eye protectors Filters for protection against infra-red radiation
AS/NZS 1698 Protective helmets for vehicle users
AS/NZS 1716 Respiratory protective devices
AS 17420.2 Respiratory protective devices — Performance requirements, Part 2: Requirements for filtering RPD (ISO 17420-2:2021, (ED.1.0) MOD)
AS/NZS ISO 17420.3 Respiratory Protective Devices – Performance Requirements Thread Connection
AS/NZS 1801 Occupational protective helmets
AS/NZS 1891.1 Personal equipment for work at height Manufacturing requirements for full body combination and lower body harnesses
AS/NZS 1891.2 Industrial fall-arrest systems and devices Horizontal lifeline and rail systems
AS/NZS 1891.3 Industrial fall-arrest systems and devices – Fall-arrest devices
AS/NZS 1891.4 Industrial Fall-Arrest Systems and Devices Selection, Use and Maintenance
AS/NZS 1906.4 Retroreflective Materials and Devices For Road Traffic Control Purposes – High-Visibility Materials For Safety Garments
AS/NZS 2063 Helmets for use on bicycles and wheeled recreational devices
AS/NZS 2161.2 Occupational protective gloves General requirements
AS/NZS 2161.3 Occupational protective gloves Protection against mechanical risks.
AS/NZS 2161.4 Occupational protective gloves Protection against thermal risks (heat and fire)
AS/NZS 2161.5 Occupational protective gloves Protection against cold
AS/NZS 2161.6 Occupational protective gloves – Protective gloves for firefighters – Laboratory test methods and performance requirements
AS 2161.6 Occupational protective gloves – Protective gloves for firefighters – Laboratory test methods and performance requirements
AS/NZS 2161.7.1 Occupational protective gloves Protection against cuts and stabs by hand knives – Chainmail gloves and arm guards
AS/NZS 2161.7.2 Occupational protective gloves Protection against cuts and stabs by hand knives – Gloves and arm guards made of material other than chainmail
AS/NZS 2161.8 Occupational protective gloves Protection against ionizing radiation and radioactive contamination
AS/NZS 2161.10.1 Occupational protective gloves Protective gloves against chemicals and micro-organisms – Terminology and performance requirements
AS/NZS 2210.3 Occupational protective footwear – Specifications for safety footwear
AS/NZS 2210.4 Occupational protective footwear – Specification for protective footwear
AS/NZS 2210.5 Occupational protective footwear – Specification for occupational footwear
AS 3789.2 Textiles for health care facilities and institutions Theatre linen and pre-packs
AS 3789.3 Textiles For Health Care Facilities and Institutions Apparel For Operating Theatre Staff
AS 3789.7 Textiles For Health Care Facilities and Institutions General Apparel
AS/NZS 3838 Helmets for horse riding and horse-related activities
AS/NZS 4011.1 Single-use medical examination gloves Specification for gloves made from rubber latex or rubber solution (ISO 11193-1:2008, MOD)
AS/NZS 4011.2 Single-use medical examination gloves Specification for gloves made from poly(vinyl chloride) (ISO 11193-2:2006, MOD)
AS/NZS 4067 Firefighters’ helmets
AS/NZS 4179 Single-use sterile rubber surgical gloves – Specification (ISO 10282:2014, MOD)
AS/NZS 4453.3 Protective clothing for users of hand-held chainsaws Protective legwear
AS/NZS 4501.1 Occupational Protective Clothing Guidelines on The Selection, Use, Care and Maintenance Of Protective Clothing
AS/NZS 4501.2 Occupational protective clothing General requirements
AS/NZS 4543.3 Protective Devices Against Diagnostic Medical X-Radiation Protective Clothing and Protective Devices For Gonads
AS 4602.1 High visibility safety garments – Garments for high risk applications
AS/NZS 4602.2 High visibility safety garments – Garments for fire service personnel
AS/NZS 4821 Protective footwear for firefighters – Requirements and test methods
AS/NZS 4824 Protective clothing for fire fighters, requirements and test methods for protective clothing used for wildland fire fighting (ISO 15384; 2003, MOD)
AS/NZS 4824 Protective clothing for firefighters – Laboratory test methods and performance requirements for wildland firefighting clothing (ISO 15384:2018, MOD)
AS/NZS 4836 Safe working on or near low-voltage electrical installations and equipment
AS 4967 Protective clothing for firefighters – Requirements and test methods for protective clothing used for structural firefighting
AS/NZS 5532 Manufacturing requirements for single-point anchor device used for harness-based work at height
AS/NZS ISO 2801 Clothing for protection against heat and flame – General recommendations for selection, care and use of protective clothing
AS/NZS ISO 6529 Protective clothing – Protection against chemicals – Determination of resistance of protective clothing materials to permeation by liquids and gases
AS 60903 Live working – Electrical insulating gloves
ASTM F 2412 Standard Test Methods for Foot Protection
ASTM F 2413 Standard Specification for Performance Requirements for Protective (Safety) Toe Cap Footwear
ASTM F 2892 Standard Specification for Performance Requirements for Soft Toe Protective Footwear (Non-Safety/Non-Protective Toe)
ENA NENS 09 National Guideline for the Selection, Use and Maintenance of Personal Protective Equipment for Electrical Arc Hazards
ISO 11611 Protective clothing for use in welding and allied processes
ISO 11612 Protective Clothing – Clothing to Protect Against Heat and Flame – Minimum Performance Requirements
ISO 11613 Protective clothing for firefighters – Laboratory test methods and performance requirements
ISO 11999-1 PPE for firefighters – Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures Part 1: General
ISO 11999-3 PPE for firefighters – Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures Part 3: Clothing
ISO 11999-4 PPE for firefighters – Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures Part 4: Gloves
ISO 11999-5 PPE for firefighters – Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures Part 5: Helmets
ISO 11999-6 PPE for firefighters – Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures Part 6: Footwear
ISO 11999-9 PPE for firefighters – Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures Part 9: Fire hoods
ISO 12312-1 Eye and face protection – Sunglasses and related eyewear Part 1: Sunglasses for general use
ISO 12401 Small craft – Deck safety harness and safety line – Safety requirements and test methods
ISO 12402-2 Personal flotation devices Part 2: Lifejackets, performance level 275 – Safety requirements
ISO 12402-3 Personal flotation devices Part 3: Lifejackets, performance level 150 – Safety requirements
ISO 12402-4 Personal flotation devices Part 4: Lifejackets, performance level 100 – Safety requirements
ISO 12402-5 Personal flotation devices Part 5: Buoyancy aids (level 50) – Safety requirements
ISO 12402-6 Personal flotation devices Part 6: Special purpose lifejackets and buoyancy aids – Safety requirements and additional test methods
ISO 12402-7 Personal Flotation Devices Part 7: Materials and Components Safety Requirements and Test Methods
ISO 12402-8 Personal Flotation Devices Part 8: Accessories Safety Requirements and Test Methods
ISO 12402-9 Personal Flotation Devices Part 9: Evaluation
ISO 12402-10 Personal Flotation Devices Part 10: Selection and Application Of Personal Flotation Devices And Other Relevant Devices
ISO 13688 Protective clothing – General requirements
ISO 13982-1 Protective clothing for use against solid particulates – Part 1:Performance requirements for chemical protective clothing providing protection to the full body against airborne solid particulates (type 5 clothing)
ISO 15027-1 Immersion suits Part 1: Constant wear suits, requirements including safety
ISO 15027-2 Immersion suits Part 2: Abandonment suits, requirements including safety
ISO 15383 Protective gloves for fire fighters – Laboratory test methods and performance requirements
ISO 15384 Protective clothing for firefighters Laboratory test methods and performance requirements for wildland firefighting clothing
ISO 16073 Wildland firefighting personal protective equipment – Requirements and test methods
ISO 16073-1 Wildland firefighting personal protective equipment — Requirements and test methods — Part 1:General
ISO 16073-2 Wildland firefighting personal protective equipment — Requirements and test methods — Part 2:Compatibility
ISO 16073-3 Wildland firefighting personal protective equipment — Requirements and test methods — Part 3:Clothing
ISO 16073-4 Wildland firefighting personal protective equipment — Requirements and test methods — Part 4:Gloves
ISO 16073-5 Wildland firefighting personal protective equipment — Requirements and test methods — Part 5:Helmets
ISO 16073-6 Wildland firefighting personal protective equipment — Requirements and test methods — Part 6:Footwear
ISO 16073-7 Wildland firefighting personal protective equipment — Requirements and test methods — Part 7:Face and eye protection
ISO 16073-8 Wildland firefighting personal protective equipment — Requirements and test methods — Part 8:Hearing
ISO 16073-9 Wildland Firefighting Personal Protective Equipment Requirements and Test Methods Part 9: Firehoods
ISO 16602 Protective clothing for protection against chemicals – Classification, labelling and performance requirements
ISO 17420-1 Respiratory Protective Devices Performance Requirements Part 1: General
ISO 17420-2 Respiratory protective devices — Performance requirements — Part 2: Requirements for filtering RPD
ISO 17420-3 Respiratory protective devices — Performance requirements — Part 3: Thread connection
ISO 17420-4 Respiratory protective devices — Performance requirements — Part 4: Requirements for supplied breathable gas RPD
ISO 17420-5 Respiratory protective devices — Performance requirements — Part 5: Special application fire and rescue services – Supplied breathable gas RPD and filtering RPD
ISO 17420-6 Respiratory protective devices — Performance requirements — Part 6: Special application escape – Filtering RPD and supplied breathable gas RPD
ISO 17420-7 Respiratory protective devices — Performance requirements — Part 7: Special application marine, mining, welding, and abrasive blasting – Filtering RPD and supplied breathable gas RPD
ISO 18639-1 PPE ensembles for firefighters undertaking specific rescue activities Part 1: General
ISO 18639-3 PPE ensembles for firefighters undertaking specific rescue activities Part 3: Clothing
ISO 18639-4 PPE ensembles for firefighters undertaking specific rescue activities Part 4: Gloves
ISO 18639-5 PPE ensembles for firefighters undertaking specific rescue activities Part 5: Helmet
ISO 18639-6 PPE ensembles for firefighters undertaking specific rescue activities Part 6: Footwear
ISO 20345 Personal protective equipment-Safety footwear
ISO 20346 Personal protective equipment-Protective footwear
ISO 20347 Personal protective equipment-Occupational footwear
ISO 20471 High visibility clothing – Test methods and requirements
ISO 22488 Ships and marine technology – Shipboard fire-fighters’ outfits (protective clothing, gloves, boots and helmet)
ISO 22610 Surgical drapes, gowns and clean air suits, used as medical devices, for patients, clinical staff and equipment — Test method to determine the resistance to wet bacterial penetration
ISO 23269-2 Ships and marine technology – Breathing apparatus for ships Part 2: Self-contained breathing apparatus for shipboard firefighters
ISO 23616 Cleaning, inspection and repair of firefighters’ personal protective equipment (PPE)
ISO 27065 Protective clothing – Performance requirements for protective clothing worn by operators applying pesticides and for re-entry workers
ISO/TS 17420-8 Respiratory Protective Devices Performance Requirements Part 8: Special Application Chemical, Biological, Radiological and Nuclear (CBRN) Filtering and Radiological-Nuclear (RN) Filtering RPD
ISO/TS 17420-9 Respiratory Protective Devices. Performance Requirements Special Application Chemical, Biological, Radiological and Nuclear (CBRN) Supplied Breathable RPD
NFPA 1851 Standard on Selection, Care, and Maintenance of Protective Ensembles for Structural Fire Fighting and Proximity Fire Fighting
NFPA 1951 Protective Ensembles For Technical Rescue Incidents
NFPA 1971 Protective Ensemble for Structural Fire Fighting
NFPA 1977 Protective Clothing Equipment for Wildland Fire Fighting
NFPA 1983 Life Safety Rope And Equipment For Emergency Services
NFPA 1992 Liquid Splash-Protective Ensembles And Clothing For Hazardous Materials Emergencies
NFPA 1994 Protective Ensembles For First Responders To Hazardous Materials Emergencies And Cbrn Terrorism Incidents
NFPA 1999 Protective Clothing And Ensembles For Emergency Medical Operations
NFPA 2112 Flame-Resistant Garments For Protection Of Industrial Personnel Against Flash Fire
NZS 5823 Buoyancy aids and marine safety harnesses and lines
NZS 8600 All-terrian Vehicle Helmets
PAS 10 Publicly available specification – Aviation high visibility safety garments (Standards New Zealand)
Fire Standards
AS 1530.1 Methods for Fire Tests On Building Materials, Components And Structures Combustibility Test For Materials
AS 1530.2 Methods for Fire Tests On Building Materials, Components And Structures Test For Flammability Of Materials
AS 1530.4 Methods for Fire Tests On Building Materials, Components And Structures Fire-Resistance Tests For Elements Of Construction
AS 1530.7 Methods for Fire Tests On Building Materials, Components And Structures Smoke Control Assemblies – Ambient And Medium Temperature Leakage Test Procedure
AS 1530.8.1 Methods for Fire Tests On Building Materials, Components And Structures Tests On Elements Of Construction For Buildings Exposed To Simulated Bushfire Attack – Radiant Heat And Small Flaming Sources
AS 1530.8.2 Methods for Fire Tests On Building Materials, Components And Structures Tests On Elements Of Construction For Buildings Exposed To Simulated Bushfire Attack – Large Flaming Sources
AS 1603.1 Automatic fire detection and alarm systems -Heat detectors
AS 1603.2 Automatic fire detection and alarm systems – Point type smoke detectors
AS 1603.3 Automatic fire detection and alarm systems – Heat alarms
AS 1603.5 Automatic fire detection and alarm systems Manual call points
AS 1603.7 Automatic fire detection and alarm systems Optical beam smoke detectors
AS 1603.8 Automatic fire detection and alarm systems Multi-point aspirated smoke detectors
AS 1603.11 Automatic fire detection and alarm systems Visual warning devices
AS 1603.13 Automatic fire detection and alarm systems – Duct sampling units
AS 1603.14 Automatic fire detection and alarm systems Point type carbon monoxide (CO) fire detectors
AS 1603.15 Automatic fire detection and alarm systems Remote indicators
AS 1603.16 Automatic fire detection and alarm systems In situ testers
AS 1603.17 Automatic fire detection and alarm systems Warning equipment for people with hearing impairment
AS 1668.1 The use of ventilation and air conditioning in building Fire and smoke control in buildings
AS 1668.2 The use of ventilation and airconditioning in buildings Mechanical ventilation in buildings
AS 1668.3 The use of ventilation and airconditioning in buildings Smoke control systems for large single compartments or smoke reservoir
AS 1670.1 Fire detection, warning, control and intercom systems – System design, installation and commissioning Fire
AS 1670.2 Fire detection, warning, control and intercom systems – System design, installation and commissioning Local fire
AS 1670.3 Fire detection, warning, control and intercom systems – System design, installation and commissioning Fire alarm monitoring
AS 1670.4 Fire detection, warning, control and intercom systems – System design, installation and commissioning Emergency warning and intercom systems
AS 1670.5 Fire detection, warning, control and intercom systems – System design, installation and commissioning Special hazards systems
AS 1670.6 Fire detection, warning, control and intercom systems – System design, installation and commissioning Smoke alarms
AS 1682.1 FIRE, SMOKE AND AIR DAMPERS SPECIFICATION
AS 1735.11 SAA Lift Code, Part 11: Fire-Rated Landing Doors
AS 1741 Vitrified Clay Pipes and Fittings With Flexible Joints – Sewer Quality
AS 1905.1 COMPONENTS FOR THE PROTECTION OF OPENINGS IN FIRE-RESISTANT WALLS PART 1: FIRE-RESISTANT DOORSETS
AS 1905.2 COMPONENTS FOR THE PROTECTION OF OPENINGS IN FIRE RESISTANT WALLS FIRE-RESISTANT ROLLER SHUTTERS
AS 2118.1 Automatic fire sprinkler systems General systems
AS 2118.2 Automatic fire sprinkler systems Wall wetting sprinkler systems
AS 2118.3 Automatic fire sprinkler systems Deluge systems
AS 2118.4 Automatic fire sprinkler systems Sprinkler protection for accommodation buildings not exceeding four storeys in height
AS 2118.5 Automatic fire sprinkler systems Home fire sprinkler systems
AS 2118.6 Automatic fire sprinkler systems Combined sprinkler and hydrant systems in multistorey buildings
AS 2118.9 Automatic fire sprinkler systems Piping support and installation
AS 2118.10 Automatic Fire Sprinkler Systems Approval Documentation
AS 2220.1 Emergency warning and intercommunication systems in buildings Equipment design and manufacture
AS 2304 Water Storage Tanks For Fire Protection Systems
AS 2419.1 Fire hydrant installations – System design, installation and commissioning
AS 2419.2 Fire hydrant installations – Fire hydrant valves
AS 2419.3 Fire hydrant installations – Fire brigade booster connections
AS 2419.4 Fire hydrant installations – Storz fittings for firefighting purposes
AS 2792 Fire hose – Delivery layflat
AS 2941 Fixed fire protection installations – Pumpset systems
AS 2665 Smoke/Heat Venting Systems – Design, Installation and Commissioning
AS 3772 Pre-engineered fire protection systems for cooking equipment
AS 3786 SMOKE ALARMS USING SCATTERED LIGHT, TRANSMITTED LIGHT OR IONIZATION
AS 3959 Construction Of Buildings In Bushfire-Prone Areas
AS 4072.1 Components For the Protection Of Openings In Fire-Resistant Separating Elements, Part 1: Service Penetrations And Control Joints
AS 4118.1.1 Fire sprinkler systems Components – Sprinklers and sprayers
AS 4118.1.2 Fire sprinkler systems Components – Alarm valves (wet)
AS 4118.1.3 Fire sprinkler systems Components – Water motor alarms
AS 4118.1.4 Fire sprinkler systems Components – Valve monitors
AS 4118.1.5 Fire sprinkler systems Components – Deluge and pre-action valve
AS 4118.1.6 Fire sprinkler systems Components – Stop valves and non-return valve
AS 4118.1.7 Fire sprinkler systems Components – Alarm valves (dry)
AS 4118.1.8 Fire sprinkler systems Components – Pressure-reducing valves
AS 4118.2.1 Fire sprinkler systems – Piping – General
AS 4214 Gaseous fire extinguishing systems
AS 4265 WHEELED FIRE EXTINGUISHERS
AS 4428.1 Fire detection, warning, control and intercom systems – Control and indicating equipment Fire
AS 4428.3 Fire detection, warning, control and intercom systems – Control and indicating equipment Fire brigade panel
AS 4428.4 Fire detection, warning, control and intercom systems – Control and indicating equipment Emergency intercom control and indicating equipment
AS 4428.5 Fire detection, warning, control and intercom systems – Control and indicating equipment Power supply units
AS 4428.6 Fire detection, warning, control and intercom systems – Control and indicating equipment Alarm signalling equipment
AS 4428.7 Fire detection, warning, control and intercom systems – Control and indicating equipment Air-handling fire mode control panel
AS 4428.9 Fire detection, warning, control and intercom systems – Control and indicating equipment Requirements for wire-free alarm zone circuits
AS 4428.10 Fire detection, warning, control and intercom systems – Control and indicating equipment Alarm investigation
AS 4428.16 Fire detection, warning, control and intercom systems – Control and indicating equipment Emergency warning control and indicating equipment
AS 4487 Condensed aerosol fire extinguishing systems – Requirements for system design, installation and commissioning and test methods for components
AS 4587 Water mist fire protection systems – System design, installation, and commissioning
AS 5062 Fire protection for mobile and transportable equipment
AS 5113 Classification Of External Walls Of Buildings Based On Reaction-To-Fire Performance
AS 5414 BUSHFIRE WATER SPRAY SYSTEMS
AS 5637.1 Determination Of Fire Hazard Properties, Part 1: Wall and Ceiling Linings
AS 6183 Fire Protection Equipment – Carbon Dioxide Extinguishing Systems For Use On Premises – Design And Installation
AS 7240.1 Fire detection and alarm systems General and definitions
AS 7240.2 Fire detection and alarm systems Control and indicating equipment (ISO 7240-2:2003, MOD)
AS 7240.2 Fire Detection and Alarm Systems Fire detection control and indicating equipment (ISO 7240-2:2017, MOD)
AS 7240.4 Fire detection and alarm systems Power supply equipment (ISO 7240-4:2003, MOD)
AS 7240.4 Fire detection and alarm systems Power supply equipment (ISO 7240-4:2017, MOD)
AS 7240.5 Fire detection and alarm systems Point type heat detectors (ISO 7240-5:2003, MOD)
AS 7240.6 Fire detection and alarm systems Carbon monoxide fire detectors using electro-chemical cells
AS 7240.7 Fire detection and alarm systems Point-type smoke detectors using scattered light, transmitted light or ionization (ISO 7240-7:2003, MOD)
AS 7240.7 Fire detection and alarm systems Point type smoke detectors using scattered light, transmitted light or ionization (ISO 7240-7:2018, MOD)
AS 7240.8 Fire detection and alarm systems Carbon monoxide fire detectors using an electro-chemical cell in combination with a heat sensor
AS 7240.10 Fire detection and alarm systems Point-type flame detectors
AS 7240.11 Fire detection and alarm systems Manual call points (ISO 7240-11:2005, MOD)
AS 7240.12 Fire detection and alarm systems Line type smoke detectors using a transmitted optical beam
AS 7240.12 Fire detection and alarm systems Line type smoke detectors using a transmitted optical beam (ISO 7240-12:2014, MOD)
AS 7240.13 Fire detection and alarm systems Compatibility assessment of system components
AS 7240.15 Fire detection and alarm systems Point type fire detectors using smoke and heat sensors (ISO 7240-15:2014, MOD)
AS 7240.15 Fire detection and alarm systems Point type fire detectors using smoke and heat sensors (ISO 7240-15:2014, MOD)
AS 7240.20 Fire detection and alarm systems Aspirating smoke detectors
AS 7240.21 Fire detection and alarm systems Routing equipment
AS 7240.22 Fire detection and alarm systems Smoke-detection equipment for ducts (ISO 7240-22:2017, MOD)
AS 7240.27 Fire detection and fire alarm systems Point type fire detectors using a smoke sensor in combination with a carbon monoxide sensor and, optionally, one or more heat sensors (ISO 7240-27:2018, MOD)
AS ISO 14520.1 Gaseous fire-extinguishing systems – Physical properties and system design General requirements (ISO 14520-1:2006, MOD)
AS ISO 14520.2 Gaseous fire-extinguishing systems – Physical properties and system design CF3I extinguishant (ISO 14520-2:2006, MOD)
AS ISO 14520.5 Gaseous fire-extinguishing systems – Physical properties sand system design FK-5-1-12 extinguishant (ISO 14520-5:2006, MOD)
AS ISO 14520.6 Gaseous fire-extinguishing systems – Physical properties and system design HCFC Blend A extinguishant (ISO 14520-6:2006, MOD)
AS ISO 14520.8 Gaseous fire-extinguishing systems – Physical properties and system design HFC 125 extinguishant (ISO 14520-8:2006, MOD)
AS ISO 14520.9 Gaseous fire-extinguishing systems – Physical properties and system design HFC 227ea extinguishant (ISO 14520-9:2006, MOD)
AS ISO 14520.10 Gaseous fire-extinguishing systems – Physical properties and system design HFC 23 extinguishant (ISO 14520-10:2005, MOD)
AS ISO 14520.11 Gaseous fire-extinguishing systems – Physical properties and system design HFC 236fa extinguishant (ISO 14520-11:2005, MOD)
AS ISO 14520.12 Gaseous fire-extinguishing systems – Physical properties and system design IG-01 extinguishant (ISO 14520-12:2005, MOD)
AS ISO 14520.13 Gaseous fire-extinguishing systems – Physical properties and system design IG-100 extinguishant (ISO 14520-13:2005, MOD)
AS ISO 14520.14 Gaseous fire-extinguishing systems – Physical properties and system design IG-55 extinguishant (ISO 14520-14:2005, MOD)
AS ISO 14520.15 Gaseous fire-extinguishing systems – Physical properties and system design IG-541 extinguishant (ISO 14520-15:2005, MOD)
AS ISO 7240.1 Fire detection and alarm systems General and definitions
AS ISO 7240.3 Fire detection and alarm systems Audible alarm devices
AS ISO 7240.5 Fire Detection and Alarm Systems Point-type heat detectors
AS ISO 7240.8 Fire detection and alarm systems Point-type fire detectors using a carbon monoxide sensor in combination with a heat sensor
AS ISO 7240.10 Fire detection and alarm systems Point-type flame detectors
AS ISO 7240.11 Fire detection and alarm systems Manual Call Points
AS ISO 7240.17 Fire detection and fire alarm systems Transmission path isolators
AS ISO 7240.18 Fire detection and alarm systems Input/output devices
AS ISO 7240.23 Fire detection and alarm systems Visual alarm devices
AS ISO 7240.24 Fire detection and alarm systems Sound-system loudspeakers
AS ISO 7240.25 Fire detection and fire alarm systems Components using radio transmission paths
AS ISO 7240.27 Fire detection and alarm systems Point-type fire detectors using a scattered-light, transmitted-light or ionization smoke sensor, an electrochemical-cell carbon-monoxide sensor and a heat sensor
AS ISO 9705 Fire Tests – Full-Scale Room Test For Surface Products
AS ISO 16003 Components For Fire Extinguishing Systems Using Gas – Requirements and Test Methods – Container Valve Assemblies and Their Actuators; Selector Valves and Their Actuators; Nozzles; Flexible and Rigid Connectors; and Check Valves and Non-Return Valves
AS/NZS 1530.3 Methods For Fire Tests On Building Materials, Components And Structures Simultaneous Determination Of Ignitability, Flame Propagation, Heat Release And Smoke Release
AS/NZS 1841.1 Portable fire extinguishers – General requirements
AS/NZS 1841.2 Portable fire extinguishers – Specific requirements for water type extinguishers
AS/NZS 1841.3 Portable fire extinguishers – Specific requirements for wet chemical type extinguishers
AS/NZS 1841.4 Portable fire extinguishers – Specific requirements for foam type extinguishers
AS/NZS 1841.5 Portable fire extinguishers – Specific requirements for powder type extinguishers
AS/NZS 1841.6 Portable fire extinguishers – Specific requirements for carbon dioxide type extinguishers
AS/NZS 1841.7 Portable fire extinguishers – Specific requirements for vaporizing liquid type extinguishers
AS/NZS 1841.8 Portable fire extinguishers – Specific requirements for non-rechargeable type extinguishers
AS/NZS 1850 PORTABLE FIRE EXTINGUISHERS – CLASSIFICATION, RATING AND PERFORMANCE TESTING
AS/NZS 1221 Fire hose reels
AS/NZS 1221:1997 Fire hose reels
AS/NZS 2293.3 Emergency lighting and exit signs for buildings Emergency luminaires and exit signs
AS/NZS 3504 Fire blankets
AS/NZS 4353 PORTABLE FIRE EXTINGUISHERS – AEROSOL TYPE
AS/NZS 4487 Pyrogen Fire Extinguishing Systems
NZS 4232.2 Performance Criteria For Fire Resisting Enclosures – Part 2: Fire Resisting Glazing Systems
NZS 4232.2 Performance Criteria For Fire Resisting Enclosures – Part 2: Fire Resisting Glazing Systems
NZS 4503 Hand Operated Fire-Fighting Equipment
NZS 4510 Fire Hydrant Systems For Buildings
NZS 4512 Fire detection and alarm systems in buildings
NZS 4514 Interconnected smoke alarms for houses
NZS 4515 FIRE SPRINKLER SYSTEMS FOR LIFE SAFETY IN SLEEPING OCCUPANCIES (UP TO 2000 SQUARE METRES)
NZS 4517 FIRE SPRINKLER SYSTEMS FOR HOUSES
NZS 4520 FIRE-RESISTANT DOORSETS
NZS 4522 UNDERGROUND FIRE HYDRANTS
NZS 4541 AUTOMATIC FIRE SPRINKLER SYSTEMS
ISO 7202 Fire Protection Fire Extinguishing Media Powder
ISO 7240-14 Fire Detection and Alarm Systems Part 14: Design, Installation, Commissioning And Service Of Fire Detection And Fire Alarm Systems In And Around Buildings
ISO 7240-16 Fire Detection and Alarm Systems Part 16: Sound System Control And Indicating Equipment
ISO 7240-19 Fire Detection and Alarm Systems Part 19: Design, Installation, Commissioning and Service Of Sound Systems For Emergency Purposes
ISO/TS 7240-29 Fire Detection and Alarm Systems Part 29: Video Fire Detectors
ISO 14520-17 Gaseous fire-extinguishing systems Physical properties and system design Part 17: Halocarbon Blend 55
ISO 7076-6 FIRE PROTECTION – FOAM FIRE EXTINGUISHING SYSTEMS – PART 6: VEHICLE MOUNTED COMPRESSED AIR FOAM SYSTEM
ISO 12239 SMOKE ALARMS USING SCATTERED LIGHT, TRANSMITTED LIGHT OR IONIZATION
ISO 15779 CONDENSED AEROSOL FIRE EXTINGUISHING SYSTEMS – REQUIREMENTS AND TEST METHODS FOR COMPONENTS AND SYSTEM DESIGN, INSTALLATION AND MAINTENANCE – GENERAL REQUIREMENTS
SNZ PAS 4505 FIREFIGHTING WATERWAY EQUIPMENT
All the appropriate ISO related fire standards
Construction Standards
ANSI Z97.1 Safety Glazing Materials Used In Buildings – Safety Performance Specifications And Methods Of Test
AS 1056.1 Storage water heaters – General requirements
AS 1056.2 Storage water heaters – Specific requirements for water heaters with single shells
AS 1056.3 Storage water heaters – Specific requirements for water heaters with composite shells
AS 1172.4 Sanitary Plumbing Products Washbasins
AS 1172.5 SANITARY PLUMBING PRODUCTS BATHS FOR ABLUTIONARY PURPOSES
AS 1191 Acoustics – Method For Laboratory Measurement Of Airborne Sound Transmission Insulation Of Building Elements
AS 1273 Unplasticized PVC (UPVC) Downpipe and Fittings For Rainwater
AS 1288 Glass in buildings – Selection and installation
AS 1316 Masonry cement
AS 1397 Continuous Hot-Dip Metallic Coated Steel Sheet and Strip – Coatings Of Zinc and Zinc Alloyed With Aluminium and Magnesium
AS 1476 Metric wood screws
AS 1530.1 Methods For Fire Tests On Building Materials, Components and Structures Combustibility Test For Materials
AS 1530.2 Methods For Fire Tests On Building Materials, Components and Structures Test For Flammability Of Materials
AS 1530.4 Methods For Fire Tests On Building Materials, Components and Structures Fire-Resistance Tests For Elements Of Construction
AS 1530.7 Methods For Fire Tests On Building Materials, Components and Structures Smoke Control Assemblies – Ambient And Medium Temperature Leakage Test Procedure
AS 1530.8.1 Methods For Fire Tests On Building Materials, Components and Structures Tests On Elements Of Construction For Buildings Exposed To Simulated Bushfire Attack – Radiant Heat And Small
AS 1530.8.2 Methods For Fire Tests On Building Materials, Components and Structures Tests On Elements Of Construction For Buildings Exposed To Simulated Bushfire Attack – Large Flaming Sources
AS 1562.1 Design and Installation Of Metal Roof And Wall Cladding, Part 1: Metal
AS 1562.3 Design and Installation Of Sheet Roof And Wall Cladding, Part 3: Plastic
AS 1546.3 On-site domestic wastewater treatment units Secondary treatment systems
AS 1546.4 On-site domestic wastewater treatment units Domestic greywater treatment systems
AS 1579 Arc-welded steel pipes and fittings for water and waste-water
AS 1657 Fixed platforms, walkways, stairways and ladders – Design, construction and installation
AS 1672.1 Limes and limestones – Limes for building
AS 1725.1 Chain link fabric fencing Security fences and gates – General requirements
AS 1741 Vitrified clay pipes and fittings with flexible joints – Sewer quality
AS 1788.1 Abrasive wheels – Design, construction, and safeguarding
AS 1905.1 Components for the protection of openings in fire-resistant walls Fire-resistant doorsets
AS 1905.2 Components For The Protection Of Openings In Fire Resistant Walls Fire-Resistant Roller Shutters
AS 1926.1 Swimming Pool Safety, Part 1: Safety Barriers For Swimming Pools
AS 2047 Windows in buildings – Selection and installation
AS 2049 Roof Tiles
AS 2304 Water Storage Tanks For Fire Protection Systems
AS 2345 Dezincification resistance of copper alloys
AS 2369.1 Materials for solar collectors for swimming pool heating Rubber materials
AS 2419.4 Fire Hydrant Installations Storz Fittings For Firefighting Purposes
AS 2665 Smoke/Heat Venting Systems – Design, Installation and Commissioning
AS 2688 Timber doors
AS 2689 Timber doorsets
AS 2858 Timber – Softwood – Visually stress-graded for structural purposes
AS 2870 Residential slabs and footings
AS 3496 Metal-bodied and plastic-bodied taps
AS 3497 DRINKING WATER TREATMENT SYSTEMS – DESIGN AND PERFORMANCE REQUIREMENTS
AS 3498 SAFETY AND PUBLIC HEALTH REQUIREMENTS FOR PLUMBING PRODUCTS – WATER HEATERS AND HOT-WATER STORAGE TANKS
AS 3582.1 Supplementary cementitious materials for use with portland and blended cement – Fly ash
AS 3582.2 Supplementary cementitious materials for use with portland and blended cement – Slag – Ground granulated iron blast-furnace
AS 3582.4 Supplementary Cementitious Materials Pozzolans — Manufactured
AS 3610 Formwork for concrete
AS 3634 Solar heating systems for swimming pools
AS 3648 Specification and methods of test for packaged concrete mixes
AS 3660.1 Termite management – New building work
AS 3660.2 Termite Management In and Around Existing Buildings And Structures
AS 3660.3 Termite Management, Part 3: Assessment Criteria For Termite Management Systems
AS 3715 Metal finishing – Thermoset powder coating for architectural applications of aluminium and aluminium alloys
AS 3718 WATER SUPPLY – TAP WARE
AS 3795 Copper alloy tubes for plumbing and drainage applications
AS 3850.2 Prefabricated concrete elements Building construction
AS 3972 General purpose and blended cements
AS 3959 Construction Of Buildings In Bushfire-Prone Areas
AS 3996 Access covers and grates
AS 4084 Steel storage racking
AS 4041 Pressure Piping
AS 4072.1 Components For The Protection Of Openings In Fire-Resistant Separating Elements, Part 1: Service Penetrations And Control Joints
AS 4123.1 Mobile waste containers Containers with two wheels and a capacity up to 400 L for lifting devices – Dimensions and design
AS 4123.2 Mobile waste containers Containers with four wheels with a capacity from 500 L to 1200 L with flat lid(s), for trunnion and/or lifting devices – Dimensions and design
AS 4123.3 Mobile waste containers Containers with four wheels with a capacity from 770 L to 1300 L with dome lid(s), for trunnion and/or lifting devices – Dimensions and design
AS 4123.4 Mobile waste containers Containers with four wheels with a capacity from 750 L to 1700 L with flat lid(s), for wide trunnion or BG and/or wide comb lifting devices – Dimensions and design
AS 4123.5 Mobile waste containers Performance requirements and test methods
As 4145.1 Locksets and Hardware For Doors And Windows Glossary Of Terms And Rating System
As 4145.2 Locksets and Hardware For Doors And Windows Mechanical Locksets For Doors and Windows In Buildings
As 4145.3 Locksets Mechanical Locksets For Windows In Buildings
As 4145.4 Locksets Padlocks
AS 4145.5 Locksets and hardware for doors and windows Controlled door closing devices (EN 1154:1997, MOD)
AS 4176.1 Multilayer pipes for pressure applications – Multilayer piping systems for hot and cold plumbing applications – General (ISO 21003-1:2008 MOD)
AS 4176.2 Multilayer pipes for pressure applications – Multilayer piping systems for hot and cold plumbing applications – Pipes (ISO 21003-2:2008 MOD)
AS 4176.3 Multilayer pipes for pressure applications – Multilayer piping systems for hot and cold plumbing applications – Fittings (ISO 21003-3:2008 MOD)
As 4200.1 Pliable Building Membranes and Underlays Materials
As 4254.1 Ductwork For Air-Handling Systems In Buildings, Part 1: Flexible Duct
As 4254.2 Ductwork For Air-Handling Systems In Buildings, Part 2: Rigid Duct
AS 4256.1 Plastic roof and wall cladding materials – General requirements
AS 4256.2 Plastic roof and wall cladding materials – Unplasticized polyvinyl chloride (uPVC) building sheets
AS 4256.3 Plastic roof and wall cladding materials – Glass fibre reinforced polyester (GRP)
AS 4256.4 Plastic roof and wall cladding materials – Unplasticized polyvinyl chloride (uPVC) wall cladding boards
AS 4256.5 Plastic roof and wall cladding materials – Polycarbonate
AS 4419 Soils for landscaping and garden use
AS 4420.0 Windows – Methods of test General introduction and list of methods
AS 4422 Playground Surfacing – Specifications, Requirements and Test Method
AS 4454 Composts, soil conditioners and mulches
AS 4586 Slip resistance classification for new pedestrian surface material
AS 4606 Grade S Fire Resistant and Antistatic Requirements For Conveyor Belting And Conveyor Accessories
AS 4654.1 Waterproofing membranes for external above-ground use Materials
AS 4654.2 Waterproofing membranes for external above-ground use Design and installation
AS 4662 Ceramic tiles – Definitions, classification, characteristics and marking
AS 4666 Insulating glass units
AS 4785.1 Timber – Softwood – Sawn and milled products – Product specification
AS 4785.2 Timber – Softwood – Sawn and milled products – Grade description
AS 4795 Butterfly valves for waterworks purposes
AS 4796 Water supply-Metal-bodied and plastic-bodied ball valves for property service connection
AS 5039 Security screen doors and security window grilles
AS 5068 Timber – Finger joints in structural products – Production requirements
AS 5082.1 Polybutylene (PB) plumbing pipe systems – Metric series – Metric polybutylene (PB) pipes for hot and cold water applications
AS 5082.2 Polybutylene (PB) plumbing pipe systems – Metric series – Mechanical and fusion jointing systems
AS 5113 Classification Of External Walls Of Buildings Based On Reaction-To-Fire Performance
AS 5146.1 Reinforced Autoclaved Aerated Concrete – Structures
AS 5146.2 Reinforced Autoclaved Aerated Concrete – Design
AS 5146.3 Reinforced Autoclaved Aerated Concrete – Construction
AS 5637.1 Determination Of Fire Hazard Properties, Part 1: Wall and Ceiling Linings
AS 6401 Knife gate valves for waterworks purposes
AS 6669 Plywood – Formwork
AS 13006 Ceramic Tiles – Definitions, Classification, Characteristics and Marking
AS ISO 717.2 Acoustics – Rating Of Sound Insulation In Buildings and Of Building Elements Impact Sound Insulation
AS ISO 9705 Fire Tests – Full-Scale Room Test For Surface Products
AS/NZS 1163 Cold-formed structural steel hollow sections
AS/NZS 1254 PVC-U pipes and fittings for stormwater and surface water applications
AS/NZS 1328.1 Glued laminated structural timber Performance requirements and minimum production requirements
AS/NZS 1428.4.1 Design For Access And Mobility Means To Assist The Orientation Of People With Vision Impairment – Tactile Ground Surface Indicators
AS/NZS 1530.3 Methods For Fire Tests On Building Materials, Components And Structures Simultaneous Determination Of Ignitability, Flame Propagation, Heat Release And Smoke Release
AS/NZS 1546.1 On-site domestic wastewater treatment units – Septic tanks
AS/NZS 1546.2 On-site domestic wastewater treatment units Waterless composting toilets
AS/NZS 1546.3 On-site domestic wastewater treatment units – Aerated wastewater treatment systems
AS/NZS 1546.4 On-site domestic wastewater treatment units Domestic greywater treatment systems
AS/NZS 1562.2 Design and Installation Of Sheet Roof And Wall Cladding, Part 2: Corrugated Fibre-Reinforced Cement
AS/NZS 1668.1 The Use Of Ventilation And Air Conditioning In Buildings, Part 1: Fire And Smoke Control In Buildings
AS/NZS 1571 Copper – Seamless tubes for airconditioning and refrigeration
AS/NZS 1576.1 Scaffolding General requirements
AS/NZS 1576.2 Scaffolding Couplers and accessories
AS/NZS 1576.3 Scaffolding Prefabricated and tube-and-coupler scaffolding
AS/NZS 1576.4 Scaffolding Suspended scaffolding
AS/NZS 1576.5 Scaffolding Prefabricated splitheads and trestles
AS/NZS 1576.6 Scaffolding – Metal tube-and-coupler scaffolding – Deemed to comply with AS/NZS 1576.3
AS 1576.7 Scaffolding Safe Use Of Encapsulation On Scaffolding
AS/NZS 1577 Scaffold decking components
AS/NZS 1594 Hot-rolled steel flat products
As 1597.1 Precast Reinforced Concrete Box Culverts Small Culverts (Not Exceeding 1200 Mm Span And 1200 Mm Height)
As 1597.2 Precast Reinforced Concrete Box Culverts Large Culverts (Exceeding 1200 Mm Span Or 1200 Mm Height and Up To and Including 4200 Mm Span and 4200 Mm Height)
As 1668.2 The Use Of Ventilation And Airconditioning In Buildings, Part 2: Mechanical Ventilation In Building
As 1668.4 The Use Of Ventilation And Airconditioning In Buildings, Part 4: Natural Ventilation Of Building
As 1682.1 Fire, Smoke and Air Dampers Specification
AS/NZS 1730 Washbasins
As 1735.11 Saa Lift Code, Part 11: Fire-Rated Landing Doors
As 1735.12 Lifts, Escalators and Moving Walks, Part 12: Facilities For Persons With Disabilities
AS/NZS 1838 Swimming pools – Premoulded fibre-reinforced plastics – Design and fabrication
AS/NZS 1859.1 Reconstituted wood-based panels – Specifications Particleboard
AS/NZS 1859.2 Reconstituted wood-based panels – Specifications Dry-processed Fibreboard
AS/NZS 1859.3 Reconstituted wood-based panels – Specifications Decorative overlaid wood panels
AS/NZS 1859.4 Reconstituted wood-based panels – Specifications Wet-processed Fibreboard
AS/NZS 1860.1 Particleboard Flooring Specification
AS/NZS 2179.1 Specifications For Rainwater Goods, Accessories and Fasteners, Part 1: Metal Shape Or Sheet Rainwater Goods, And Metal Accessories And Fasteners
AS/NZS 2208 Safety glazing materials in buildings
AS/NZS 2269 Plywood – Structural
AS/NZS 2269.0 PLYWOOD – STRUCTURAL SPECIFICATIONS
AS/NZS 2270 Plywood and blockboard for interior use
AS/NZS 2271 Plywood and blockboard for exterior use
AS/NZS 2272 Plywood – Marine
AS/NZS 2293.3 Emergency Lighting and Exit Signs For Buildings Emergency Luminaires And Exit Signs
AS/NZS 2343 Bullet-resistant panels and elements
AS/NZS 2425 Bar chairs in reinforced concrete – Product requirements and test methods
AS/NZS 2588 Gypsum plasterboard
AS/NZS 2610.2 Spa pools – Private spas
AS/NZS 2699.1 Built-In Components For Masonry Construction – Wall Ties
AS/NZS 2699.2 Built-In Components For Masonry Construction – Connectors And Accessories
AS/NZS 2699.3 Built-In Components For Masonry Construction – Lintels And Shelf Angles (Durability Requirements)
AS/NZS 2712 Solar and heat pump water heaters – Design and construction
AS/NZS 2728 Prefinished/prepainted sheet metal products for interior/exterior building applications – Performance requirements
AS/NZS 2803.1 Doors – Security screen – Hinged
AS/NZS 2904 Damp-proof courses and flashings
AS/NZS 2908.1 Cellulose-cement products Corrugated sheets
AS/NZS 2908.2 Cellulose-cement products – Flat sheet
AS/NZS 3497 Drinking water treatment units – Plumbing requirements
AS/NZS 3582.1 Supplementary Cementitious Materials Fly Ash
AS/NZS 3582.3 Supplementary cementitious materials for use with portland and blended cement – Amorphous silica
AS/NZS 3679.1 Structural steel – Part 1: Hot-rolled bars and sections
AS/NZS 3679.2 Structural steel – Part 2: Welded I sections
AS/NZS 3678 Structural steel – Hot-rolled plates, floorplates and slabs
AS/NZS 3718 Water supply – Tap ware
AS/NZS 3845.1 Road Safety Barrier Systems and Devices Road Safety Barrier Systems
AS/NZS 4058 Precast concrete pipes (pressure and non-pressure)
AS/NZS 4114.1 Spray painting booths, designated spray painting areas and paint mixing rooms – Design, construction and testing
AS/NZS 4114.2 Spray painting booths, designated spray painting areas and paint mixing rooms – Installation and maintenance
AS/NZS 4129 Fittings for polyethylene (PE) pipes for pressure applications
AS/NZS 4130 Polyethylene (PE) pipes for pressure applications
AS/NZS 4131 Polyethylene (PE) compounds for pressure pipes and fittings
AS/NZS 4158 Thermal-bonded polymeric coatings on valves and fittings for water industry purposes
AS/NZS 4200.1 Pliable building membranes and underlays – Materials
AS/NZS 4256.3 Plastic roof and wall cladding materials – Glass fibre reinforced polyester (GRP)
AS/NZS 4256.6 Plastic roof and wall cladding materials – Glass fibre reinforced polyester (GRP)
AS/NZS 4284 Testing Of Building Facades
AS/NZS 4357.0 Structural laminated veneer lumber – Specifications
AS/NZS 4389 Roof safety mesh
AS/NZS 4422 Playground surfacing – Specifications, requirements and test method
Composts, soil conditioners and mulches
AS/NZS 4455.1 Masonry units, pavers, flags and segmental retaining wall units – Masonry units
AS/NZS 4455.2 Masonry Units, Pavers, Flags and Segmental Retaining Wall Units, Part 2: Pavers And Flags
AS/NZS 4455.3 Masonry units, pavers, flags and segmental retaining wall units – Segmental retaining wall units
AS/NZS 4488.1 Industrial rope access systems Specifications
AS/NZS 4505 Garage doors and other large access doors
AS/NZS 4666 Insulating glass units
AS/NZS 4671 Steel reinforcing materials
AS/NZS 4672 Steel prestressing materials – General requirements
AS/NZS 4766 Polyethylene storage tanks for water and chemicals
AS/NZS 4858 Wet area membranes
AS/NZS 4859.1 Materials for the thermal insulation of buildings – General criteria and technical provisions
AS/NZS 4999 PVC-U maintenance shafts
AS/NZS 5532 Manufacturing Requirements For Single-Point Anchor Device Used For Harness-Based Work At Height
AS/NZS 61386.21 CONDUIT SYSTEMS FOR CABLE MANAGEMENT PARTICULAR REQUIREMENTS – RIGID CONDUIT SYSTEMS
AS/NZS ISO 717.1 Acoustics – Rating Of Sound Insulation In Buildings and Of Building Elements Airborne Sound Insulation
ASTM C 1048 Standard Specification for Heat-Treated Flat Glass – Kind HS, Kind FT Coated and Uncoated Glass
ASTM C 1172 Standard Specification for Laminated Architectural Flat Glass
ASTM F1281-17 Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe
ASTM F1948-20 Standard Specification for Metallic Mechanical Fittings for Use on Outside Diameter Controlled Thermoplastic Gas Distribution Pipe and Tubing
ISO 8336 Fibre-cement flat sheets – Product specification and test methods
ISO 21005 Ships and marine technology – Thermally toughened marine safety glass panes for windows and side scuttles
NZS 2295 Pliable, permeable building underlays
NZS 4211 Specification for performance of windows
NZS 4218 Thermal insulation – Housing and small building
NZS 4223.1 Code of practice for glazing in buildings – Glass selection and glazing
NZS 4223.2 Glazing in buildings – Part 2: Insulating glass units
NZS 4223.4 Glazing in buildings – Part 4: Wind, dead, snow, and live actions
NZS 4232.2 Performance Criteria For Fire Resisting Enclosures – Part 2: Fire Resisting Glazing Systems
NZS 4454 Composts, soil conditioners and mulches
NZS 4510 Fire Hydrant Systems For Buildings
NZS 4520 Fire-Resistant Doorsets
NZS 4522 Underground Fire Hydrants
NZS 8500 Safety barriers and fences around swimming pools, spas and hot tubs
WSA 101 Submersible Pumps For Sewerage Pumping Stations
WSA 109 Industry Standard For Flange Gaskets And O-Rings
WSA 115 Post-Formed Variable Bend PVC Fittings For Non Pressure Pipelines
WSA 129 Plastics Collection Tanks For Pressure And Vacuum Sewers
WSA 130 Iso End Suction Centrifugal Pumps
WSA 131 Iso End Suction Centrifugal Motor Pumps
WSA 137 Industry Standard For Uplasticized Poly(Vinyl Chloride) (PVC-U), Polypropylene (PP) And Polyethylene (PE) Maintenance Shafts, Maintenance Chambers And Maintenance Holes For Sewerage
Safety Standards
AS 1223 Industrial hand cleaners (petroleum solvent type)
AS 1353.1 Flat synthetic-webbing slings Product specification
AS 1666.1 Wire-rope slings Product specification
AS 1753 Webbing for restraining devices for occupants of motor vehicles
AS 1788.1 Abrasive wheels – Design, construction, and safeguarding
AS 1892.1 Portable Ladders Performance and Geometric Requirements
AS 1892.2 Portable Ladders Timber
AS 1892.5 Portable Ladders Selection, Safe Use and Care
AS 1906.1 Retroreflective Materials and Devices For Road Traffic Control Purposes – Retroreflective Sheeting
AS 1926.1 Swimming Pool Safety, Part 1: Safety Barriers For Swimming Pools
AS 1926.3 Swimming Pool Safety, Part 3: Water Recirculation Systems
AS 2089 Sheave blocks for lifting purposes
AS 2142 Reflectors for pedal bicycles
AS 2182 Sterilizers – Steam – Benchtop
AS 2243.8 Safety in laboratories – Fume cupboards
AS 2243.9 Safety in laboratories – Recirculating fume cabinets
AS 2227 Yachting harnesses and lines – Conventional lines
AS 2351 Nappy sanitizers
AS 2432 Standard for Babies’ Dummies
AS 2538 VEHICLE SUPPORT STANDS
AS 2613 Safety devices for gas cylinders
AS 2657 Powered rotary lawnmowers
AS 2726.1 Chainsaws – Safety requirements – Chainsaws for general use
AS 2726.2 Chainsaws – Safety requirements – Chainsaws for tree service
AS 2869 Tampons – Menstrual
AS 2942 Wheelchair occupant restraint assemblies for motor vehicles
AS 3547 Breath alcohol testing devices for personal use
AS 3562 Lighting equipment for bicycles
AS 3569 Steel wire ropes – Product specification
AS 3743 Potting mixes
AS 3792.1 Ride-on lawnmowers – Powered rotary ride-on mowers
AS 4092 Exercise cycles—safety requirements
AS 4287 Child use and care articles – Child seats for cycles – Safety requirements and test methods (EN 14344:2004, MOD)
AS 4419 Soils for landscaping and garden use
AS 4454 Composts, soil conditioners and mulches
AS 4586 Slip Resistance Classification Of New Pedestrian Surface Materials
AS 4758.1 Personal flotation devices – General requirements
AS 4775 Emergency Eyewash and Shower Equipment
AS 4484 Gas cylinders for industrial, scientific, medical and refrigerant use – Labelling and colour coding
AS 4866.1 Playing field equipment – Soccer goals Safety aspects
AS 15194 Cycles – Electrically power assisted cycles – EPAC Bicycles (also known as pedelecs) (EN 15194:2009, MOD)
AS 20957.1 Stationary training equipment General safety requirements and test methods
AS EN 16579 Playing field equipment – Portable and permanent socketed goals – Functional, safety requirements and test methods
AS ISO 20957.2 Stationary training equipment Strength training equipment, additional specific safety requirements and test methods
AS ISO 20957.4 Stationary training equipment Strength training benches, additional specific safety requirements and test methods
AS ISO 20957.5 Stationary training equipment Stationary exercise bicycles and upper body crank training equipment, additional specific safety requirements and test methods
AS ISO 20957.6 Stationary training equipment Treadmills, additional specific safety requirements and test methods
AS ISO 20957.7 Stationary training equipment Rowing machines, additional specific safety requirements and test methods
AS ISO 20957.8 Stationary training equipment Steppers, stairclimbers and climbers – Additional specific safety requirements and test methods
AS ISO 20957.9 Stationary training equipment Elliptical trainers, additional specific safety requirements and test methods
AS ISO 20957.10 Stationary training equipment Exercise bicycles with a fixed wheel or without a freewheel – Additional specific safety requirements and test methods
AS/NZS 1249 Children’s nightwear and limited daywear having reduced fire hazard
AS/NZS 1657 Fixed platforms walkways stairways and ladders – Design construction and installation
AS/NZS 1754 Child restraints for use in motor vehicles
AS/NZS 1891.1 Industrial fall-arrest systems & devices – Harnesses & ancillary equipment
AS/NZS 1891.2 Industrial fall-arrest systems & devices – Horizontal lifeline & rail systems
AS/NZS 1891.3 Industrial fall-arrest systems & devices – Fall-arrest devices
AS/NZS 1891.4 Industrial fall-arrest systems & devices – Selection, Use & Maintenance
AS/NZS 1892.1 Portable ladders – Metal
AS/NZS 1892.2 Portable ladders – Timber
AS/NZS 1892.3 Portable ladders – Reinforced plastic
AS/NZS 1900 Flotation Aids For Water Familiarization And Swimming Tuition
AS/NZS 1906.2 Retroreflective Materials and Devices For Road Traffic Control Purposes – Retroreflective Devices (Non-Pavement Application)
AS/NZS 1906.3 Retroreflective Materials and Devices For Road Traffic Control Purposes – Raised Pavement Markers (Retroreflective And Non-Retroreflective)
AS/NZS 1906.4 Retroreflective materials and devices for road traffic control purposes High-visibility materials for safety garments
AS/NZS 1927 Pedal bicycles – Safety requirements
AS/NZS 1940 The storage and handling of flammable and combustible liquid
AS/NZS 2080 Safety glazing for land vehicles
AS/NZS 2088 Prams and strollers – Safety requirements
AS/NZS 2130 Cots for day nursery, hospital and institutional use – Safety requirements
AS/NZS 2172 Cots for household use – safety requirements
AS/NZS 2195 Folding Cots – Safety requirements
AS/NZS 2293.1 Emergency lighting and exit signs for buildings System design, installation and operation
AS/NZS 2293.3 Emergency lighting and exit signs for buildings Emergency luminaires and exit signs
AS/NZS 2381.2 Electrical equipment for explosive atmospheres – Selection, installation and maintenance – Flameproof enclosure d
AS/NZS 2538 Vehicle support stands
AS/NZS 2596 Seat belt assemblies for motor vehicles (ECE Regulation No. 16, MOD)
AS/NZS 2615 Hydraulic trolley jacks
AS/NZS 2640 Portable ramps for vehicles
AS/NZS 2693 Vehicle jacks
AS/NZS 2865 Confined Spaces
AS/NZS 2906 Fuel containers – Portable-plastic and metal
AS/NZS 3695.1 Wheelchairs Requirements and test methods for manual wheelchairs
AS/NZS 3695.2 Wheelchairs Requirements and test methods for electrically powered wheelchairs (including mobility scooters)
AS/NZS 3696.19 Wheelchairs Wheeled mobility devices for use as seats in motor vehicles (ISO 7176-19:2008, MOD)
AS/NZS 3845.1 Road Safety Barrier Systems and Devices Road Safety Barrier Systems
AS/NZS 3973 Shower/toilet chairs (mobile and static)
AS/NZS 4034.1 Motor vehicles – Cargo barriers for occupant protection Cargo barriers
AS/NZS 4034.2 Motor vehicles – Cargo barriers for occupant protection Partial cargo barriers
AS/NZS 4142.3 Fibre Ropes – man-made fibre rope for static life rescue lines
AS/NZS 4220 Bunk beds and other elevated beds
AS/NZS 4261 Reusable Containers For The Collection Of Sharp Items Used In Human and Animal Medical Applications
AS/NZS 4380 Motor vehicles – Cargo restraint systems -Transport webbing and components
AS/NZS 4399 Sun protective clothing – Evaluation and classification
AS/NZS 4422 Playground surfacing – Specifications, requirements and test method
AS/NZS 4488.1 Industrial rope access systems – Specifications
AS/NZS 4488.2 Industrial rope access systems – Selection, Use & Maintenance
AS/NZS 4994.1 Temporary edge protection General requirements
AS/NZS 5532 Manufacturing requirements for single-point anchor device used for harness-based work at height
AS/NZS 5848 Code Of Practice For Bungy Jumping
AS/NZS 8124.2 Safety of toys Flammability
AS/NZS 8124.4 Safety of toys Experimental sets for chemistry and related activities
AS/NZS 8124.6 Safety of toys Swings, slides and similar activity toys for indoor and outdoor family domestic use
AS/NZS 8124.9 Safety of toys Organic chemical compounds – Requirements
AS/NZS 10542.1 Technical Systems and Aids For Disabled Or Handicapped Persons – Wheelchair Tiedown And Occupant-Restraint Systems Requirements and Test Methods For All Systems
AS/NZS ISO 8124.1 Safety of toys Safety aspects related to mechanical and physical properties
AS/NZS ISO 8124.5 Safety of toys Chemical toys (sets) other than experimental sets
AS/NZS ISO 8124.7 Safety of Toys Requirements and test methods for finger paints
ASTM F 977 Standard Consumer Safety Specification for Infant Walkers
ASTM F 1967 Standard Consumer Safety Specification for Infant Bath Seats
ISO 21005 Ships and Marine Technology Thermally Toughened Safety Glass Panes For Windows and Side Scuttles
EN 1400 Child use and care article – Soothers for babies and young children – Safety requirements and test method
EN 12586 Child use and care article – Soother holder – Safety requirements and test method
NZS 4454 Composts, soil conditioners and mulches
WaterMark Standards
AS 1172.1 Water closets (WC) – Pans
AS 1172.2 Water closets (WCs) Flushing devices and cistern inlet and outlet valves
AS 1172.3 Sanitary plumbing products – Personal hygiene fixtures and appliances – Bidettes and bidets
AS 1357.1 Valves primarily for use in heated water systems – Protection valves
AS 1357.2 Valves primarily for use in heated systems – Part 2:Control valves
AS 1432 Copper tubes for plumbing, gasfitting and drainage applications
AS 1589 Copper and copper alloy waste fittings
AS 1628 Water supply – Metallic gate, globe and non-return valves
AS 1631 Cast grey and ductile iron non-pressure pipes and fittings
AS 1646 Elastomeric seals for waterworks purposes
AS 1910 Water supply – Float control valves for use in hot and cold water
AS 2419.2 Fire hydrant installations – Part 2: Fire hydrant valves
AS 2419.3 Fire hydrant installations – Part 3: Fire brigade booster connections
AS 2492 Cross-linked polyethylene (PE-X) pipes for pressure applications
AS 2537 Mechanical jointing fittings for use with crosslinked polyethylene (XLPE) pipes for hot and cold water applications
AS 2537.4 Mechanical Jointing Fittings For Use With Crosslinked Polyethylene (PE-X) For Pressure Applications Plastics Piping Systems For Hot and Cold Water Installations – Crosslinked Polyethylene (PE-X) – Guidance For The Assessment Of Conformity
AS 2537.5 Mechanical Jointing Fittings For Use With Crosslinked Polyethylene (PE-X) For Pressure Applications Plastics Pipes and Fittings – Crosslinked Polyethylene (PE-X) Pipe Systems For The Conveyance Of Gaseous Fuels – Metric Series – Specifications -Fittings For Mechanical Jointing (Including PE-X/Metal Transitions)
AS 2638.1 Gate valves for waterworks purposes – Part 1: Metal seated
AS 2638.2 Gate valves for waterworks purposes – Part 1: Resilient seated
AS 2887 Plastic waste fittings
AS 3494 Bidettes and bidets
AS 3495 Authorization requirements for plumbing products – Stainless steel non-pressure pipes and fittings
AS 3498 Authorization requirements for plumbing products – Water heaters and hot-water storage tanks
AS 3517 Capillary fittings of copper and copper alloy for non-pressure sanitary plumbing applications
AS 3565.1 Meters for cold and heated drinking and non-drinking water supplies – Technical requirements
AS 3565.2 Meters for water supply – Combination meters
AS 3565.3 Meters for water supply – Water meters with integral dual check valves
AS 3565.5 Meters for water supply – Water meters with two integral single check valves
AS 3565.4 Meters For Cold And Heated Drinking and Non-Drinking Water Supplies In-Service Compliance Testing
AS 3571 Glass filament reinforced thermosetting plastics (GRP) pipes – Polyester based – Water supply, sewerage and drainage applications
AS 3571.1 Plastics piping systems – Glass-reinforced thermoplastics (GRP) systems based on unsaturated polyester (UP) resin – Pressure and non-pressure drainage and sewerage
AS 3571.2 Plastics piping systems – Glass-reinforced thermoplastics (GRP) systems based on unsaturated polyester (UP) resin – Pressure and non-pressure water supply
AS 3688 Water supply – Metallic fittings and end connectors
AS 3691 Solvent cement and priming (cleaning) fluids for use with ABS pipes and fittings
AS 3718 WATER SUPPLY – TAP WARE
AS 3795 Copper alloy tubes for plumbing and drainage applications
AS 3952 Water supply – Spring hydrant valve for waterworks purposes
AS 3996 Access covers and grates
AS 4032.1 Water supply – Valves for the control of heated water supply temperatures – Part 1: Thermostatic mixing valves – Materials design and performance requirements
AS 4032.2 Water supply – Valves for the control of heated water supply temperatures – Part 2: Tempering valves and end-of-line temperature-actuated devices
AS 4032.4 Water supply – Valves for the control of heated water supply temperatures -Thermostatically controlled taps for the control of heated water supply temperatures
AS 4139 Fibre-reinforced concrete pipes and fittings
AS 4176.1 Multilayer pipes for pressure applications – Multilayer piping systems for hot and cold plumbing applications – General (ISO 21003-1:2008 MOD)
AS 4176.2 Multilayer pipes for pressure applications – Multilayer piping systems for hot and cold plumbing applications – Pipes (ISO 21003-2:2008 MOD)
AS 4176.3 Multilayer pipes for pressure applications – Multilayer piping systems for hot and cold plumbing applications – Fittings (ISO 21003-3:2008 MOD)
AS 4176 Polyethylene / aluminium and cross-linked polyethylene / aluminium macro composite pipe systems for pressure applications
AS 4181 Repair and off-take clamps for water industry purposes
AS 4793 Mechanical tapping bands for waterworks purposes
AS 4794 Non-return valves-Swing check and tilting disc
AS 4795.1 Butterfly valves for waterworks purposes – Wafer and lugged
AS 4795.2 Butterfly valves for waterworks purposes Double flanged
AS 4796 Water supply-Metal-bodied and plastic-bodied ball valves for property service connection
AS 5039 Security screen doors and security window grilles
AS 5081 Hydraulically operated automatic control valves for waterworks purposes
AS 5082.1 Polybutylene (PB) plumbing pipe systems – Metric series – Metric polybutylene (PB) pipes for hot and cold water applications
AS 5200.053 Stainless steel pipes and tubes for pressure applications
AS 5200.458 Plumbing and drainage products – Universal plastic-bodied transition couplings
AS 5830.1 In-line ball valves for use in plumbing water supply systems – metal bodied
AS 6401 Knife-Gate Valves For Waterworks Purposes
AS/NZS 1260 PVC pipes and fittings for drain, waste and vent applications
AS/NZS 1477 PVC Pipes and fittings for pressure applications
AS/NZS 2280 Ductile iron pipe fittings
AS/NZS 2492 Cross-linked polyethylene (PE-X) pipes for pressure applications
AS/NZS 2537.1 Mechanical Jointing Fittings For Use With Crosslinked Polyethylene (PE-X) For Pressure Applications Plastics Piping Systems For Hot and Cold Water Installations – Crosslinked Polyethylene (PE-X) – General
AS/NZS 2537.3 Mechanical Jointing Fittings For Use With Crosslinked Polyethylene (PE-X) For Pressure Applications Plastics Piping Systems For Hot and Cold Water Installations – Crosslinked Polyethylene (PE-X) – Fitness For Purpose Of The System
AS/NZS 2537.2 Mechanical jointing fittings for use with crosslinked polyethylene (PE-X), Part 2: Plastics piping systems for hot and cold water installations – Crosslinked polyethylene(PE-X)
AS/NZS 2638.1 Gate valves for waterworks purposes – Metal seated
AS/NZS 2638.2 Gate valves for waterworks purposes – Resilient seated
AS/NZS 2642.2 Polybutylene (PB) plumbing pipe systems – Polybutylene (PB) pipe for hot and cold water applications
AS/NZS 2642.3 Polybutylene (PB) plumbing pipe systems – Mechanical jointing fittings for use with polybutylene (PB) pipes for hot and cold water applications
AS/NZS 2712 Solar and heat pump water heaters – Design and construction
AS/NZS 2845.1 Water supply – Backflow prevention devices – Part 1: Materials, design and performance requirements
AS/NZS 3497 DRINKING WATER TREATMENT SYSTEMS – DESIGN AND PERFORMANCE REQUIREMENTS
AS/NZS 3499 Water supply – Flexible hose assemblies
AS/NZS 3518 Acrylonitrile butadiene styrene (ABS) pipes and fittings for pressure applications
AS/NZS 3662 Performance of showers for bathing
AS/NZS 3718 Water supply – Tap ware
AS/NZS 3879 Solvent cements and priming fluids for PVC (PVC-U and PVC-M) and ABS and ASA pipes and fittings
AS/NZS 3982 Urinals
AS/NZS 4020 Testing of products for use in contact with drinking water
AS/NZS 4129 Fittings for polyethylene (PE) pipes for pressure applications
AS/NZS 4130 Polyethylene (PE) pipes for pressure applications
AS/NZS 4327 Metal-banded flexible couplings for low-pressure applications
AS/NZS 4401 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings – Polyethene (PE)
AS/NZS 4441 Oriented PVC (PVC-O) pipes for pressure applications
AS/NZS 4765 Modified PVC (PVC-M) pipes for pressure applications
AS/NZS 4766 Polyethylene storage tanks for water and chemicals
AS/NZS 4936 Air admittance valves (AAV’s)
AS/NZS 4999 PVC-U maintenance shafts
AS/NZS 5065 Polythene and polypropylene pipes and fittings for drainage and sewerage applications
AS/NZS 7671 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings
EN 877 Cast iron pipes and fittings
ISO 7682 Plastics piping systems for soil and waste discharge
ISO 15874-1 Plastic piping systems for hot and cold water installations – Polypropylene (PP) – General
ISO 15874-2 Plastics piping systems for hot and cold water installations – Polypropylene (PP) – Pipes
ISO 15874-3 Plastic piping systems for hot and cold water installations – Polypropylene (PP) – Fittings
SA TS 100 Vacuum WC pans, vacuum urinals and interface valves intended for use with vacuum drainage systems and designs
WMTS-004 Urinal Flushing Cisterns
WMTS-006 WMTS 006-2014 : WaterMark Technical Specification – Reflux valves —Sewerage
WMTS-012 In-line valves for use in plumbing water supply systems – Miscellaneous types metallic and non-metallic
WMTS-014 Jointing materials
WMTS-016 Cistern inlet valves
WMTS-017 Cistern outlet valves
WMTS-020 Flushing valves for water closets and urinals – For use with mains supply
WMTS-021 Flushing valves for water closets and urinals – For use with break tank supply
WMTS-026 Cold water storage tanks
WMTS-028 Commercial food waste disposal unit
WMTS-030 Solenoid valves
WMTS-033 Spraying apparatus/dispensing units with the option of chemical additions – Hose connected
WMTS-037.1 Flow controllers – For controlling flows in cold or heated water systems
WMTS-040 Waste pipe connection outlets and gratings, separate or integral
WMTS-042 Roll-grooved jointing systems
WMTS-046 Diversion systems – Wash down and first flush
WMTS-047 Self-sealing devices
WMTS-050 Prefabricated bathroom modules
WMTS-051 Bidet douche seats
WMTS-052 Metallic-bodied inlet pressure control valves greater than DN 50
WMTS-055 Plastic fittings – Connectors with flexible intermediate joints for drainage and sewerage applications – JAS-ANZ
WMTS-101 Appliances (low hazard rating)
WMTS-103 Water treatment systems (other than those specified in AS/NZS 3497)
WMTS-104 Appliances (miscellaneous)
WMTS-105 Appliances – Beverage dispensers and icemakers
WMTS-106 Small bore pumping units
WMTS-420 Trap-priming valves
WMTS-425 Water closet suite with integral odour control device
WMTS-453 Heated water systems – Thermostatic circulation valve
WMTS-459 Waterless urinals – Wall hung
WMTS-460 Grey water diversion device (GWDD)
WMTS-463 Pressure attenuator
WMTS-464 Hot water manual or sensor-activated pumping systems
WMTS-466 Rainwater tank connection devices
WMTS-467 Rainwater tank connection valve
WMTS-468 Hot water systems – Recirculation valves
WMTS-469 Waterless or limited flush urinals – With an integral sealing device
WMTS-472 Heated water system recirculation device
WMTS-473 Heated water systems – Cold water recovery device
WMTS-475 Stainless steel/nano-antibiotic PP-R pipe systems for water supply applications
WMTS-476 Heated Water Systems – Leak protection device
WMTS-477 Rainwater/mains supply changeover devices
WMTS-478 Cross-linked polyethylene/Aluminium/ Cross-linked polyethylene macro-composite pipe systems for pressure applications
WMTS-479 Flood stop safety valve
WMTS-481 Thermal switching valves
WMTS-482 Soil waste dump fitting
WMTS-483 Odour control filter
WMTS-485 Pressure compensating tank
WMTS-486 Fire sprinkler heads for domestic applications
WMTS-489 Stainless steel flexible assemblies for plumbing applications
WMTS-491 Aluminium alloy piping system with plastics lining for plumbing water services applications
WMTS-498 Plastic Fittings – Overflow Relief Waste Outlet with Integral Cap-stopper
WMTS-499 Inline sewer dosing unit (SDU)
WMTS-501 Anti-infiltration overflow-relief device
WMTS-504 Sanitary Waste Flushing and Dosing System
WMTS-507 Acrylonitrile Butadiene Styrene Piping System with Stainless Steel Lining
WMTS-508 Plastic Piping Systems for Soil and Waste Discharge – with Noise Reduction Characteristics
WMTS-511 Epoxy Barrier Coating System for use in Water Supply Applications
WMTS-516 Water closet pan and flushing device with included macerating and lifting plant
WMTS-517 Offset Pan Connectors
WMTS-518 Rehabilitation of existing Non Pressure Pipelines by the use of Cured In Place Pipe (CIPP)
WMTS-519 Plastic Bodied Flexible Coupling
WMTS-520 Semi-Flexible Metallic Hose Assemblies
WMTS-522 Fixture and floor wastes – Supplementary protection devices
WMTS-524 Bathroom appliances
WMTS-525 Appliances – Therapeutic baths
WMTS-526 Flushing sinks
WMTS-527 Automatic hand washing stations
WMTS-528 Plate heat exchangers – Indirect heating/cooling of water in a plumbing system
WMTS-530 Water meters with integral shut off valve
WMTS-533 Wet well washers
WMTS-534 Metallic pressure differential bypass valves used in heated water systems
WMTS-535 Anti-slam air valves for plumbing applications
WSA 109 Flange gaskets and O-rings