HZLAB20210224返回 Back
美国
| CONDITIONING | |
| ASTM D 618 | Conditioning of Plastics for Testing |
| ASTM D 832 | Rubber Conditioning for Low Temperature Testing |
| ABRASION | |
| ASTM C 1353 / C 1353M | Abrasion Resistance of Dimension Stone Subjected to Foot Traffic Using a Rotary Platform Abraser |
| ASTM D 1630 | Rubber Property – Abrasion Resistance (Footwear Abrader) |
| ASTM D 3389 | Coated Fabrics Abrasion Resistance (Rotary Platform Abrader) |
| ASTM D 4060 | Abrasion Resistance Organic Coatings by the Taber Abraser |
| ASTM D 5963 | Rubber Properties – Abrasion Resistance (Rotary Drum Abrader) |
| BS ISO 4649 | Rubber, Vulcanized or Thermoplastic – Determinationof Abrasion Resistance using a Rotating Cylindrical Drum Device |
| DIN ISO 4649 | Determination of Abrasion resistance using a rotating cylindrical drum device |
| ISO 4649 | Determination of Abrasion resistance using a rotating cylindrical drum device |
| Ford FLTM BN 107-01 | Crocking Test – Interior Trim Materials |
| ASTM D 3884 | Standard Guide for Abrasion Resistance of Textile Fabrics (Rotary Platform, Double-Head Method) |
| ISO 105-X12 | Determining Abrasion Resistance of Color Textiles |
| ELECTRICAL | |
| ASTM D 150 | AC Loss Characteristics and Permittivity (Dielectric Constant of Solid Electrical Insulation |
| ASTM D 257 | DC Resistance or Conductance of Insulating Materials |
| ASTM D 991 | Volume Resistivity of Electrically Conductive and Antistatic Products |
| EXPOSURE TESTING | |
| ASTM D 454 | Rubber Deterioration by Heat and Air Pressure |
| ASTM D 572 | Rubber – Deterioration by Heat and Oxygen |
| ASTM D 573 | Rubber – Deterioration in an Air Oven |
| ASTM D 794 – 1993 (Withdrawn 1998) | Determining Permanent Effect of Heat on Plastics |
| ASTM D 865 | Rubber – Deterioration by Heating in Air (Test Tube Enclosure) |
| ASTM D 1055 – 2009 (Parts 15-16) | Accelerated Aging Tests |
| (Withdrawn in 2014) | |
| ASTM D 3045 | Heat Aging of Plastics Without Load |
| ASTM D 3574 (Test J) | Flexible Cellular Materials – Slab, Bonded, and Molded Urethane Foams – Steam Autoclave Aging |
| ASTM D 3574 (Test K) | Flexible Cellular Materials – Slab, Bonded, and Molded Urethane Foams – Dry Heat Aging |
| DIN 53 508 | Accelerated Ageing of Rubber |
| ISO 188 | Rubber, vulcanized or thermoplastic – Accelerated Ageing and Heat Resistance Tests |
| JIS K 6257 | Rubber, Vulcanized or Thermoplastic – Determination of Heat Ageing Properties |
| SAE J 2236 | Determining Continuous Upper Temperature Resistance of Elastomers |
| LOW TEMPERATURE | |
| ASTM D 746 | Brittleness Temperature of Plastics and Elastomer by Impact |
| ASTM D 1329 | Evaluating Rubber Property – Retraction at Lower Temperatures (TR Test) |
| ASTM D 2137 | Rubber Property – Brittleness Point of Flexible Polymers and Coated Fabrics |
| ISO 812 | Rubber, Vulcanized or Thermoplastic –Determination of Low Temperature Brittleness |
| JIS K 6261 Withdrawn | Rubber, Vulcanized or Thermoplastic – Determination of Low Temperature Properties |
| JIS K 6261-1 | General Introduction and Guide: Determination of low temperature properties |
| JIS K 6261-2 | Low temperature Brittleness |
| JIS K 6261-3 | Low temperature stiffness |
| JIS K 6261-4 | Low temperature retraction |
| ULTRAVIOLET FLUORESCENT LAMPS/XENON | |
| ASTM D 750 | Rubber Deterioration Using Artificial Weathering Apparatus |
| ASTM D1148 | Rubber Deterioration-Discoloration from Ultraviolet (UV) or UV/Visible Radiation and Heat Exposure of Light-Colored Surfaces and Xenon-Arc Apparatus |
| ASTM D 2565 | Xenon-Arc Exposure of Plastics Intended for Outdoor Applications |
| ASTM D 4329 | Fluorescent Ultraviolet (UV) Lamp Apparatus Exposure of Plastics |
| ASTM D 4587 | Fluorescent UV-Condensation Exposures of Paint and Related Coatings |
| ASTM D 4799 | Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Fluorescent UV, Water Spray, and Condensation Method) |
| ASTM D 5208 | Fluorescent Ultraviolet (UV) Exposure of Photodegradable Plastics |
| ASTM D 5215 | Instrumental Evaluation of Staining of Vinyl Flooring by Adhesives |
| ASTM D 6662 (Section 6.3) | Polyolefin-Based Plastic Lumber Decking Boards |
| ASTM G 151 | Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources |
| ASTM G 154 | Operating Fluorescent Ultraviolet (UV) Lamp Apparatus for Exposure of Nonmetallic Materials |
| ISO 4892-3 | Methods of Exposure to Laboratory Light Sources – Fluorescent UV Lamps |
| MIL-DTL-85052 B (Section 4.4.4.3.1) | General Specification for Clamp, Loop, Cushion: Ultraviolet Exposure |
| Navistar MPAPS GT-31 (2014) | Accelerated Weathering of Non-Metallic Materials |
| Polaris ENG-TST-10-026, Section 4.5 (2011) | UV Test Procedure |
| SAE J 2020 | Accelerated Exposure of Automotive Exterior Materials Using a Fluorescent UV and Condensation Apparatus |
| ASTM D 4459 | Xenon-Arc Exposure of Plastics Intended for Indoor Applications |
| ASTM D 4637/D 4637M | Weather Resistance of EPDM Sheet Used in Single- |
| (Sections 8.19 & 8.20) | Ply Roof Membrane |
| ASTM D 4798/D 4798 M | Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Fluorescent UV, Water Spray, and Condensation Method) |
| ASTM D 6695 | Xenon-Arc Exposure of Paint and Related Coatings |
| ASTM D 6878/D 6878M (Section 7.13) | Weather Resistance of Thermoplastic Polyolefin Based Roofing |
| ASTM D 7869 | Xenon Arc Exposure Test with Enhanced Light and Water Exposure for Transportation Coatings |
| ASTM F1515 (Water Cooled Xenon Only) | Measuring Light Stability of Resilient Flooring by Color Change |
| ASTM G 26-96 (Withdrawn in 2000) | Operating Light-Exposure Apparatus (Xenon-Arc Type) With and Without Water for Exposure of Nonmetallic Materials |
| ULTRAVIOLET FLUORESCENT LAMPS/XENON (continued) | |
| ASTM G 155 | Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials |
| Boeing BMS 1-57L-2011 (Section 8.10) | Weather Resistance – Silicon Rubber, Extreme Low Temperature Resistant |
| Fiat 50451-2009 (Method A) | Accelerated Aging by Atmospheric Agents |
| Ford FLTM BO 116-01 | Resistance to Interior Weathering |
| Ford ESB-M 9 P 4-A-19782 (Withdrawn) | Rubber Parts – Migration Staining Against Paint |
| GM 9902 P-96 Withdrawn | Noncontact Staining Measurement of Elastomers (Xenon-Arc) |
| GMW 3414 | Artificial Weathering of Automotive Interior Trim Materials |
| GMW 14162 (Methods A, B or D) | Colorfastness to Artificial Weathering |
| GMW 14650, 4.11 | Compatibility |
| GMW 14743, Table 1 | Elastomer for Wiper Blades – Paint Staining |
| Honda HES D2500-10 (Sections 3.12.1b&3.12.2）) | Light Resistance/Weather Resistance – Resin Materials for Vehicles |
| Honda HES D 6601-99 A | Accelerated Test Method for Light Resistance with Xenon-Arc Lamp |
| ISO 105-B 02 | Colour Fastness to Artificial light: Xenon Arc Fading Lamp Test |
| ISO105-B 01 | Color fastness to Daylight |
| ISO 105-B 06 （Conditions 3, 4, 5 or 6) | Colour Fastness and ageing to Artificial Light at High Temperatures: Xenon Arc Fading Lamp Test |
| ISO 3865 | Rubber, Vulcanized or Thermoplastic – Methods of Test for Staining in Contact with Organic Material |
| ISO 4892-1 | Methods of Exposure to Laboratory Light Sources – General Guidance |
| ISO 4892-2 | Methods of Exposure to Laboratory Light Sources – Xenon-Arc Lamps |
| ISO 11341-20042 (Withdrawn) | Paints and Varnishes – Artificial Weathering and Exposure to Artificial Radiation – Exposure to Filtered Xenon-Arc Radiation |
| ISO 30013 | Rubber and Plastics Hoses – Methods of Exposure to Laboratory Light Sources – Determination of Changes in Colour, Appearance and Other Physical Properties |
| JASO M 305 (Section 5.14) | Weatherstrips for Automobiles – Weatherability Test |
| JASO M 346 | Light-Exposure Test Method by Xenon-Arc Lamp for Automotive Interior Part |
| JIS B 7754 | Light-Exposure and Light-and-Water-Exposure Apparatus (Xenon-arc Lamp Type) |
| MIL-STD-810 G Method 506 (Procedure 11 Only) | Determining the Effects of Solar Radiation on Material |
| Nissan NES M 0135 (Except 1-II-1B and 1-II-3 Using Air Cooled Xenon Lamps) (2008 Only) | Weatherability and Light Resistance Test Methods for Synthetic Resin Parts |
| PSA Peugeot – Citroen D 27-1389-07 | Paint Coatings Rubbers and Plastics Artificial Weathering by Weatherometer |
| Renault D 27 1911 D-07 | Rubbers and Plastic, Paint Coatings Artificial Ageing Using a Weatherometer |
| ULTRAVIOLET FLUORESCENT LAMPS/XENON (continued) | |
| SAE J 1885-2005 (Withdrawn in 2008) | Accelerated Exposure of Automotive Interior Trim Components Using a Controlled Irradiance Water Cooled Xenon-Arc Apparatus |
| SAE J 1960-2004 (Withdrawn in 2008) | Accelerated Exposure of Automotive Exterior Materials Using a Controlled Irradiance Water Cooled Xenon-Arc Apparatus |
| SAE J 2027 (Section 5.2.8) | Standard for Protective Covers for Gasoline Fuel Line Tubing, Chemical Resistance (Xenon-Arc) |
| SAE J 2412 | Accelerated Exposure of Automotive Interior Trim Components Using a Controlled Irradiance Water Cooled Xenon-Arc Apparatus |
| SAE J2527 | Performance Based Standard for Accelerated Exposure of Automotive Exterior Materials Using a Controlled Irradiance Xenon-Arc Apparatus |
| Suzuki SES N 3292-00 Methods WAL-2 & WAN-2 | Test Methods of Weatherability and Light Resistance for Plastic Parts |
| Toyota TSH 1585G-10 (Except Test Types IV & V) | Xenon-Arc Lamp Type Methods for Accelerated Weathering Resistance of Paint Film |
| Toyota TSL 0601 G-11 (Methods B & E) | Criteria for Test for Quality of Color Change by Aging |
| Toyota TSM 0501 G-03 (Section 9.20 with Atlas Ci65 or Equivalent) | Accelerated Weather (Light) Resistance Test |
| UL 1581 (Section 1200) | Sunlight Resistance |
| UL 2556 (Section 4.2.8.5) | Weather (Sunlight) Resistance |
| VW PV 1303-01 | Exposure Test of Passenger Compartment Components |
| VW PV 3929-18 | Non-Metallic Materials: Weathering in Dry, Hot Climate |
| VW PV 3930-17 | Non-Metallic Materials: Weathering in Moist, Hot Climate |
| Yamaha YGK-8-501 (2008) | Painting – Accelerated Weatherability |
| ADHESION | |
| AFG-01 - 1984 | Adhesive for Field-Gluing Plywood to Wood Framing |
| ASTM D 903 | Peel or Stripping Strength of Adhesive Bonds |
| ASTM D 2229 | Standard Test Method for Adhesion Between Steel Tire Cords and Rubber |
| ASTM D3359 | Measuring Adhesion by Tape Test |
| ASTM D 3498 | Adhesives for Field-Gluing Plywood to Lumber Framing for Floor Systems |
| CHEMICAL RESISTANCE | |
| ASTM D 471 | Rubber Property – Effect of Liquids |
| ASTM D 543 | Evaluating the Resistance of Plastics to Chemical Reagents |
| ASTM D 6284 | Rubber Property – Effect of Aqueous Solutions with Available Chlorine and Chloramine |
| DIN 53 521 – 1987 (Withdrawn in 1999） | Determination of the Behavior of Rubber and Elastomers when Exposed to Fluids And Vapours |
| DIN ISO 1817 | Determination of the effect of liquids |
| JIS K6258 | Rubber, Vulcanized or Thermoplastic – Determination of the Effect of Liquids |
| ISO 1817 | Rubber, Vulcanized or Thermoplastic – Determination of the Effect of Liquids |
| ASTM F 146 | Fluid Resistance of Gasket Material |
| GMW 14334 | Chemical Resistance to Fluids |
| NES M 0133 2010 | Testing methods of chemical resistance for plastic parts |
| COLOR | |
| AATCC EP-1 | Grey Scale for Color Change |
| ASTM D 1003 Method B | Haze and Luminous Transmittance of Transparent Plastics |
| ASTM D 2244 | Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
| ASTM E 313 | Calculating Yellowness and Whiteness Indices from Instrumentally Measured Color Coordinates |
| ASTM E 1164 | Obtaining Spectrometric Data for Object-Color Evaluation |
| ASTM E 1331 | Reflectance Factor and Color by Spectrophotometry Using a Hemispherical Geometry |
| ISO 105/A 02 | Grey Scale for Assessing Change in Colour |
| ISO 105/A 04 | Method for the Instrumental Assessment of the Degree of Staining of Adjacent Fabrics |
| ISO 4582 | Determination of Changes in Colour and Variations in Properties after Exposure to Daylight under Glass,Natural Weathering or Laboratory Light Sources |
| JIS L 0804 | Grey scale for assessing change in Color |
| SAE J 1545 | Instrumental Color Difference Measurement for Exterior Finishes, Textiles and Colored Trim |
| COMPRESSION | |
| ASTM D 395 | Compression Set |
| ASTM D 575 | Rubber Properties in Compression |
| ASTM D 623 Method A only | Heat Generation and Flexing Fatigue in Compression |
| ASTM D 695 | Compressive Properties of Rigid Plastics |
| ISO 604 | Compressive Properties of Rigid Plastics |
| ASTM D 790 | Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials |
| ASTM D 945 | Rubber Properties in Compression or Shear (Mechanical Oscillograph) |
| ASTM D 1055 (17-19) – 2009 (Withdrawn in 2014 | Compression Set Under Constant Deflection |
| ASTM D 1055 (24-26) – 2009 (Withdrawn in 2014) | Flexing Test (Suffix H) |
| ASTM D 1055 (27-30) – 2009 (Withdrawn in 2014) | Low-Temperature Test (Compression/Deflection) |
| ASTM D 1229 | Compression Set at Low Temperatures |
| ASTM D 3574 (Test C) | Compression Force Deflection Test |
| ASTM D 3574 (Test D) | Constant Deflection Compression Set |
| ASTM D 3575 (Section 9-16) | Flexible Cellular Materials Made from Olefin Polymers– Compression Set Under Constant Deflection |
| ASTM D 3575 (Section 17-24) | Flexible Cellular Materials Made from Olefin Polymers– Compression Deflection |
| ASTM F 1342 (Procedure A) | Protective Clothing Material Resistance to Puncture |
| ISO 178 Type I, II, III | Determination of Flexural Properties |
| ISO 815-1 | Determination of Compression Set – at Ambient or Elevated Temperatures |
| ISO 815-2 | Determination of Compression Set – at Low Temperatures |
| ISO 1653 - 1975 (Withdrawn in 1993) | Vulcanized Rubbers - Determination of Compression Set under Constant Deflection at Low Temperatures |
| ISO 3386-1 | Determination of stress strain characteristics in compression-Low density materials |
| DIN EN ISO 3386-1 | Determination of stress strain characteristics in compression-Low density materials |
| JIS K 6262 | Rubber, Vulcanized or Thermoplastic – Determination of Compression Set at Ambient, Elevated or Low Temperatures |
| ASTM D 4014 | Shear Modulus and Related Testing for Elastomeric Bridge Bearings |
| ASTM D 1667 (Parts 16-20) | Compression Deflection Test Method |
| ASTM D 1667 (Parts 21-25) | Compression Set Under Constant Deflection |
| CONDOM TEST (Except Burst Testing) | |
| ASTM D 3492 | Rubber Contraceptives (Male Condoms) |
| ARDL 2139 | Lubricant Testing on Condoms |
| BS 3704 – 1996 (Withdrawn) | Natural Rubber Latex Male Condoms |
| ISO 4074 Except annex G and section M.3 | Natural Rubber Latex Male Condoms – Requirements and Test Methods |
| BS EN ISO 4074 Except annex G and section M.3 | Natural Rubber Latex Male Condoms – Requirements and Test Methods |
| WHO – Male Latex Condom Test | The Male Latex Condom |
| ASTM D 7661 | Determining Compatibility of Personal Lubricants with Natural Rubber Latex Condoms |
| CORROSION EVALUATION | |
| SAE J 1389 | Corrosion Test for Insulation Materials |
| CRACK RESISTANCE | |
| ASTM D 813 | Rubber Deterioration – Crack Growth |
| ASTM D 1693 | Environmental Stress – Cracking of Ethylene Plastics |
| DIMENSIONAL STABILITY | |
| ASTM D 1204 | Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperatures |
| ASTM D3575 – Suffix S (Sections 35-42) | Flexible Cellular Materials Made from Olefin Polymers– Thermal Stability |
| ASTM D 3767 | Rubber Properties – Measurement of Dimensions |
| DENSITY | |
| ASTM D 792 | Density and Specific Gravity of Plastics by Displacement |
| ISO 1183-1 Method A | Plastics – Methods for Determining the Density of Non-Cellular Plastics |
| ASTM D 1667, X3 | Suggested Test Method for Density (Suffix W) |
| ASTM D 622/D 1622 M | Standard Test method for Apparent Density of Rigid Cellular Plastics |
| ASTM D 3574 (Test A) | Density Test Urethane Foams |
| ASTM D3575 (Suffix W,Procedure A) | Density – Flexible Cellular Materials Made from Olefin Polymers |
| EXTENSION CYCLING FATIGUE/CUT GROWTH | |
| ASTM D 430 | Rubber Deterioration – Dynamic Fatigue |
| ASTM D 1052 | Measuring Rubber Deterioration – Cut Growth Using Ross Flexing Apparatus |
| ASTM D 4482 | Rubber Property – Extension Cycling Fatigue |
| FLAMMABILITY | |
| ASTM C 1166 | Flame Propagation of Dense and Cellular Elastomeric Gaskets and Accessories |
| ASTM D 635 | Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position |
| ASTM D 3801 | Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position |
| ASTM D 5132 | Horizontal Burning Rate of Polymeric Materials Used in Occupant Compartments of Motor Vehicles |
| USDOT FMVSS-302-03 | Flammability of Interior Materials – Passenger Cars, Multipurpose Passenger Vehicles, Trucks and Buses |
| IEC 60695-11-10 | 50W Horizontal and Vertical Flame Test Methods |
| ISO 3795 | Determination of Burning Behavior of Interior Materials |
| SAE J 369 | Flammability of Polymeric Interior Materials – Horizontal Test Method |
| UL94 (except sections 9,10,11and 12) | Flammability of Plastic Materials for Parts in Devices and Appliances |
| VW TL 1010-2008 | Burning Behavior – Materials used in Vehicle Interiors |
| FOGGING CHARACTERISTICS | |
| Chrysler LP-463 DB -12-01 – 2000 Withdrawn | Fogging Resistance of Interior Materials |
| GMW 3235 | Fogging Characteristics of Trim Materials |
| SAE J 1756 | Determination of the Fogging Characteristics of Interior Automotive Materials |
| FRICTION PROPERTIES | |
| ASTM D 1894 | Static and Kinetic Coefficients of Friction of Plastic Film and Sheeting |
| GLOSS (20°/60°/85°) | |
| ASTM C 584 | Specular Gloss of Glazed Ceramic Whitewares and Related Products |
| ASTM D 523 | Specular Gloss |
| ASTM D 4039 | Reflection Haze of High-Gloss Surfaces |
| Federal Standard 141 D (Methods 6101.1, 6103 &6104 only) | 60°, 85°, 20° Specular Gloss |
| Ford FLTM BI 110-01 | Measurement of the Gloss of Paint Panels |
| Honda HES D 2500-10 (Section 3.10 only) | Gloss Test |
| JIS Z 8741 | Specular Glossiness |
| ISO 2813 | Gloss values at 20°, 60°, 85° |
| GLOVE TESTING | |
| ASTM D 120 | Rubber Insulating Gloves |
| ASTM D 3577 | Rubber Surgical Gloves |
| ASTM D 3578 | Rubber Examination Gloves |
| ASTM D 5151 | Detection of Holes in Medical Gloves |
| ASTM D 5250 | Poly (Vinyl Chloride) Gloves for Medical Application |
| ASTM D 6124 | Residual Powder on Medical Gloves |
| ASTM D 6319 | Nitrile Examination Gloves for Medical Application |
| ARDL 2140 | Lubricant Testing on Gloves |
| BS EN 455-1 | Medical Gloves for Single Use – Requirements and Testing for Freedom from Holes |
| BS EN 455-2 | Medical Gloves for Single Use – Requirements and Testing for Freedom from Holes |
| BS EN 374-2 (withdrawn 2014) | Determination of Resistance to Penetration |
| HARDNESS | |
| ASTM D 2240 (Types A, D, M, and OO) | Rubber Property – Durometer Hardness |
| DIN 53 505-2000 (Withdrawn in 2012) | Shore A and Shore D Hardness Testing of Rubber |
| ISO 868 (Types A and D) | Plastics and Ebonite – Determination of Indentation Hardness by Means of a Durometer (Shore Hardness) |
| DIN ISO 7619-1 | Rubber, Vulcanized or Thermoplastic-Determination of Indentation Hardness |
| JIS K 6253-2 M and CM only | Rubber, Vulcanized or Thermoplastic – Determination of Hardness (Hardness Between 10 IRHD and 100 IRHD) |
| ASTM D 1415 | Rubber Property – International Hardness |
| ISO 48 M and CM only (Withdrawn) | Rubber, Vulcanized or Thermoplastic – Determination of Hardness (Hardness between 10 IRHD and 100 IRHD) |
| ASTM D 785 (Scale R) | Rockwell Hardness of Plastics and Electrical Insulating Materials |
| HDT/VICAT SOFTENING POINT | |
| ASTM D 648 (Method A) | Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position |
| ASTM D 1525 (Rate B) | Vicat Softening Temperature of Plastics |
| ISO 75-1 | Determination of Temperature of Deflection under Load – General Test Method |
| ISO 75-2 | Determination of Temperature of Deflection under Load – Plastics and Ebonite |
| ISO 75-3 | Determination of Temperature of Deflection under Load – High-Strength Thermosetting Laminates and Long-Fibre- Reinforced Plastics |
| ISO 306 (Method A120) | Determination of Vicat Softening Temperature |
| HOSE TESTING | |
| ASTM D 380 | Rubber Hose for Automotive Air and Vacuum Brake Systems |
| ASTM D 622 | Standard Test Method for Rubber Hoses |
| SAE J 1037 | Windshield Washer Tubing |
| IMPACT | |
| ASTM D 256 | Determining the Izod Pendulum Impact Resistance of Plastics |
| ASTM D 4226 | Impact Resistance of Rigid Poly(Vinyl Chloride) Building Products |
| ASTM D 4812 | Unnotched Cantilever Beam Impact Resistance of Plastics |
| ASTM D 5420 | Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Hammer (Gardner Impact) |
| ISO 179-1 | Determination of Charpy Impact Properties |
| ISO 180 | Determination of Izod Impact Strength |
| INJECTION MOLDING TEST SPECIMENS | |
| ASTM D 3641 | Injection Molding Test Specimens of Thermoplastics Molding and Extrusion Materials |
| MELT FLOW | |
| ASTM D 1238 | Melt Flow Rates of Thermoplastics by Extrusion Plastometer |
| ISO 1133-1 | Determination of the Melt Mass Flow Rate (MFR) and Melt Volume-Flow Rate (MVR) of Thermoplastics |
| ODOR TESTING | |
| Delphi SD 2-208 (Section 5.3.2) 2012 | Odor Test |
| GMW 3205 | Determining the Resistance to Odor Propagation of Interior Materials |
| GMW 14131 | Compatibility of Interior Trim Materials with Amines |
| SAE J 1351 | Hot Odor Test for Insulation Materials |
| VDA 270 | Determination of odor characteristics of trim materials |
| OZONE TESTING | |
| ASTM D 518-99 (Withdrawn in 2008) | Rubber Deterioration – Surface Cracking |
| ASTM D 1149 | Rubber Deterioration – Cracking in an Ozone Controlled Environment |
| ASTM D 1171 | Rubber Deterioration – Surface Ozone Cracking Outdoors or Chamber (Triangular Specimens) |
| ASTM D 3395-99 (Withdrawn in 2008) | Rubber Deterioration – Dynamic Ozone Cracking in a Chamber |
| DIN 53 509-1-1990 (Withdrawn in 2011) | Resistance of rubber to ozone cracking |
| ISO 1431-1 | Rubber, Vulcanized or Thermoplastic – Resistance to Ozone Cracking – Static and Dynamic Strain Testing |
| Ford BP 101-01 | Degradation by ozone |
| FMVSS 106 TP-106 April 2008 (sections 12.A.13 & 12.B.6) | Laboratory test procedure for FMVSS 106 brake hoses |
| SAE J 1401 Section 4.2.9 & 4.2.13 | Hydraulic Brake Hose Assemblies for use with nonpetroleum base hydraulic fluids |
| GM 4486 P-1995(Withdrawn 2011) | Test for Ozone Resistance of Elastomer Compounds |
| RESILIENCE BY REBOUND | |
| ASTM D 2632 | Rubber Property – Resilience by Vertical Rebound |
| ASTM D 7121 | Rubber Property – Resilience Using Schob Type Rebound Pendulum |
| DIN 53 512 | Rubber, Vulcanized or Thermoplastic – Determination of Rebound Resilience |
| ISO 4662 (Pendulum Method) | Determining the Rebound Resilience of Rubber using the Schob Pendulum |
| STAIN RESISTANCE | |
| AATCC Evaluation Procedure 2 | Grey Scale for Staining |
| ASTM D 925 | Rubber Property – Staining of Surfaces (Contact, Migration, and Diffusion) |
| GM 9240 P-882 (Withdrawn 2013) | Perspiration Resistance |
| BN 103-01 | Resistance of Coated Fabrics and Plastic Film to Migration Staining and Blocking |
| ISO 3865 | Rubber, Vulcanized or Thermoplastic – Methods for Staining in Contact with Organic Materials |
| Nissan NES M 0142-1991 (Section 18 & 19) | Staining/Indirect Staining |
| SAE J 322 | Nonmetallic Trim Materials – Test Method for Determining the Staining Resistance to Hydrogen Sulfide Gas |
| STIFFNESS | |
| ASTM D 1053 | Rubber Property – Stiffening at Low Temperatures: Flexible Polymers and Coated Fabrics (Torsional Stiffness) |
| TENSILE TESTS | |
| ASTM D 412 (Method A) | Vulcanized Rubber and Thermoplastic Elastomers – Tension |
| ASTM D 413 | Rubber Property – Adhesion to Flexible Substrate |
| ASTM D 429 | Rubber Property – Adhesion to Rigid Substrates |
| ASTM D 624 | Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers |
| ASTM D 638 | Tensile Properties of Plastics |
| ASTM D 882 | Tensile Properties of Thin Plastic Sheeting |
| ASTM D 1002 | Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal) |
| ASTM D 1004 | Tear Resistance (Graves Tear) of Plastic Film and Sheeting |
| ASTM D 1708 | Tensile Properties of Plastics by Use of Microtensile Specimens |
| ASTM D 3163 | Determining Strength of Adhesively Bonded Rigid Plastic Lap-Shear in Shear by Tension Loading |
| ASTM D 3574 (Test E) | Flexible Cellular Materials – Slab, Bonded, and Molded Urethane Foams – Tensile Test |
| ASTM D 3574 (Test F) | Flexible Cellular Materials – Slab, Bonded, and Molded Urethane Foams – Tear Test |
| ASTM F 152 | Tension Testing of Nonmetallic Gasket Materials |
| DIN 53 504 | Determination of Tensile Strength |
| TENSILE TESTS (continued) | |
| ISO 34-1 | Rubber, vulcanized or thermoplastic – Determination of Tear Strength – Trouser, Angle and Crescent Test Pieces |
| ISO 34-2 | Rubber, Vulcanized or Thermoplastic – Determination of Tear Strength – Small (Delft) Test Pieces |
| ISO 37 | Rubber, Vulcanized or Thermoplastic – Determination of Tensile Stress-Strain Properties |
| ISO 527-1 | Plastics – Determination of Tensile Properties |
| ISO 6383-1 | Film and Sheeting – Determination of Tear Resistance – Trouser Tear Method |
| JIS K 6251 | Rubber, Vulcanized or Thermoplastic – Determination of Tear Strength |
| JIS K 6252-1 | Rubber, Vulcanized or Thermoplastic- Determination of tear strength Trouser, angle crescent pieces |
| JIS K 6252-2 | Rubber, Vulcanized or Thermoplastic- Determination of tear strength Small (delft) test pieces |
| JIS K 6252-2007 (Withdrawn) | Rubber, Vulcanized or Thermoplastic – Determination of Tensile Stress-Strain Properties |
| DIN 53 507 – 1983 (Withdrawn) | Determination of Tear Growth Propagation Trouser Test Piece |
| ASTM D 3137 | Standard Test Method for Rubber Property- Hydrolytic Stability |
| LOW TEMPERATURE BENDING | |
| ASTM D 2136 | Coated Fabrics – Low Temperature Bending Test |
| VAPOR TRANSMISSION OF VOLATILE LIQUIDS | |
| ASTM D 814 | Rubber Property – Vapor Transmission of Volatile Liquids |
| VOLATILE LOSS | |
| ASTM D 1203 | Volatile Loss of Plastics Using Activated-Carbon Method |
| SAE J 2665 | Measurement of fuel permeability of materials by the cup weight loss methods |
| WATER ABSORPTION | |
| ASTM D 570 | Water Absorption of Plastics |
| ASTM D 3575 – Suffix L (Sections 26-32) | Flexible Cellular Materials Made from Olefin Polymers– Water Absorption |
| ISO 62 | Plastics – Determination of Water Absorption |
| BS EN ISO 62 | Plastics – Determination of Water Absorption |
| ASTM D1056, sections 43 to 49 | Flexible Cellular Materials-Sponge or Expanded Rubber-water absorption, |
| ISO 6916-1 Annex E | Flexible cellular polymeric materials-Sponge and expanded cellular rubber |
| SAMPLE PREPARATION AND MOLDING | |
| ASTM D 2229 | Standard Test Method for Adhesion Between Steel Tire Cords and Rubber |
| ASTM D 3182 | Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets |
| ASTM D 3767 | Standard Practice for Rubber – Measurement of Dimensions |
| VISCOSITY | |
| ASTM D 1646 | Rubber – Viscosity, Stress Relaxation, and Pre – Vulcanization Characteristics (Mooney Viscometer) |
| RHEOLOGY | |
| ASTM D 2084 | Rubber Property – Vulcanization Using Oscillating Disk Cure Meter |
| ASTM D 5289 | Rubber Property – Vulcanization Using Rotorless Cure Meters |
| VOLATILE MATTER | |
| ASTM D 5668 (Method A) | Rubber from Synthetic Sources – Volatile Matter |
| SAMPLE PREPARATION AND MOLDING | |
| ASTM D 3182 | Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets |
| ASTM D 3183 | Rubber – Preparation of Pieces for Test Purposes from Products |
| MISCELLANEOUS | |
| ASTM D 6147 | Determination of Force Decay (Stress Relaxation) in Compression |
| ASTM F 36 | Compressibility and Recovery of Gasket Materials |
| ASTM F 1112 | Statics Testing of Tubeless Pneumatic Tires for Rate of Loss of Inflation Pressure |
| ISO 3384-1 | Determination of Stress Relaxation in Compression |
| CONVEYOR BELTING, FLAT TYPE | |
| ASTM D 378 (Section 12) | Breaking Strength and Modulus Testing of Conveyor Belting |
| ELECTRICAL | |
| ASTM D 149 | Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulation Materials at Commercial Power Frequencies |
| FEA MODELING AND SUPPORT TESTING | |
| ASTM D 4014 (Except 8.2.3, 8.2.5 & 8.2.6) | Plain and Steel-Laminated Elastomeric Bearings for Bridges |
| ARDL 8105 | Finite Element Analysis |
| ARDL 8106 (Except Compression Set, ASTM D395) | Finite Element Analysis Support Test |
| ARDL 8107 | Life Prediction of Elastomeric Components or Materials |
| ARDL 8111 | Shelf Life Prediction for Rubber Products |
| DYNAMIC TESTING | |
| ASTM D 4065 | Plastics: Dynamic Mechanical Properties: Determination and Report of Procedures |
| ASTM D 5992 | Dynamic Testing of Vulcanized Rubber and Rubber-Like Materials Using Vibratory Methods |
| SAE J 1085 | Testing Dynamic Properties of Elastomeric Isolators |
| ISO 4664-1 | Rubber, Vulcanized or Thermoplastic-Determination of Dynamic Properties |
| ASTM D 5024 | Dynamic Mechanical Properties in Compression |
| ASTM D 5026 | Dynamic Mechanical Properties in Tension |
| ASTM E 1640 | Standard for Assignment of the Glass Transition Temperature by Dynamic Mechanical Analysis |
| IMPACT | |
| ASTM D 3763 | High Speed Puncture Properties of Plastics Using Load and Displacement Sensors |
| ASTM F 1292 | Impact Attenuation of Surfacing Materials Within the Use Zone of Playground Equipment |
| SALT SPRAY CORROSION | |
| ASTM B 117 | Operating Salt Spray (Fog) Apparatus |
| HOSE TESTING | |
| ASTM D 380 (Section 14-17) | Rubber Hose for Automotive Air and Vacuum Brake Systems |
| CARBON ARC | |
| ASTM C 793 | Effects of Laboratory Accelerated Weathering on Elastomeric Joint Sealants |
| ASTM D 750 | Rubber Deterioration Using Artificial Weathering Apparatus |
| ASTM D 822 | Filtered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings |
| CARBON ARC (continued) | |
| ASTM G 152 | Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials |
| Honda HES D 2500 -10 Rev 2 (3.12.2) | Weathering Resistance Test Resistance Test |
| ISO 4892-4 | Methods of Exposure to Laboratory Light Sources: Open-Flame Carbon-Arc Lamps |
| JIS B 7753 | Sunshine Carbon Arc Lamp Type Weathering Test Machine and Light Resistance Tester |
| JIS D 0205 | Test Method of Weatherability for Automotive Parts |
| Nissan NES M 0007 - 2006(Methods A and B) | Test Method for Resistance Characteristics to Rubber Part |
| Nissan NES M 0501 (Methods 4, 5 and 6) - 2007 | Testing Methods of Staining for Rubber, Vulcanized or Thermoplastic |
| Nissan NES M 0135 - 2008 | Weatherability and Light Resistance Test Methods for Synthetic Resin Parts |
| Toyota TSM 1500G, 5.18 - 2012 | Staining Test (By Contact) |
| Toyota TSM 1501G, 8.9 - 2004 | Staining Test |
| Toyota TSK 6505G (Section 4.6) - 2011 | Paint Film Contamination Resistance |
| OIL AND GAS | |
| ISO 23936-1 | Petroleum, Petrochemical and Natural Gas Industries –Non-Metallic Materials in Contact With Media Related Oil and Gas Production – Thermoplastics |
| ISO 23936-2 | Petroleum, Petrochemical and Natural Gas Industries – Non-Metallic Materials in Contact With Media Related Oil and Gas Production – Elastomers |
| NACE TM 0192 | Evaluating Elastomeric Materials in Carbon Dioxide Decompression Environments |
| NORSOK M-710 | Rapid Gas Decompression Resistance |
| Dynamic Testing | 0.001 to 1000 Hz |
| Static Testing | |
| Axial, Multi-Axial | 500 kN |
| SPECTROSCOPY | |
| ASTM D 3677 | Identification by Infrared Spectrophotometry |
| ASTM D 5673 | Elements in Water by Inductively Coupled Plasma-Mass Spectrometry |
| ASTM D 7558 | Colorimetric/Spectrophotometric Procedure to Quantify Extractable Chemical Dialkyldithiocarbamate, Thiuram and Mercaptobenzothiazole Accelerators in Natural Rubber Latex and Nitrile Gloves |
| ASTM E 1252 | General Techniques for Obtaining Infrared Spectra for Qualitative Analysis |
| ASTM F 963 (Sections 8.3, A7.5.3) | Standard Consumer Safety Specification for Toy Safety |
| CHROMATOGRAPHY | |
| ASTM D 4327 | Standard Test Method for Anions in Water by Suppressed Ion Chromatography |
| ASTM F 2466 | Determining Silicone Volatiles in Silicone Rubber for Transportation Applications |
| Daimler Chrysler LP-461J-1271 (Withdrawn) | Silicone Volatiles Determination in Silicone Rubber |
| Ford AV-102-01 | Determination of Percent Silica-Producing Volatiles in Silicone Rubber Adhesives/Sealers Which Cure at Room Temperature |
| GM 9009P1 (Withdrawn) | Test for Volatiles in Silicone Rubber |
| ARDL 3138 | Identification of Rubber Chemicals by High Performance Liquid Chromatography |
| ARDL 3174 | Residual Accelerator Analysis |
| ARDL 3110 | Thin Layer Chromatography (TLC) |
| ARDL 3160 | Gas Chromatrograph/Mass Spectrometer and Auto Sampler |
| DENSITY | |
| ASTM D 297 (Section 16.3.1) | Rubber Products – Chemical Analysis |
| ASTM D 1817 | Rubber Chemicals – Density |
| ISO 1183-1 (Method B) | Methods for Determining the Density of Non-Cellular Plastics |
| ASTM D 792 | Density and Specific Gravity of Plastics by Displacement |
| GRAVIMETRIC | |
| ASTM D 297 (Sections 17-29, 41-51) | Rubber Products – Chemical Analysis |
| ASTM D 5630 | Standard Test Method for Ash Content in Plastics |
| RUBBER AND FOOD CONTACT ASSESSMENT | |
| ARDL 3171 | Formula Evaluation and Extractable Testing |
| 21 CFR 177.2600 | Rubber Articles Intended for Repeated Use |
| STATE OF CURE | |
| ARDL 3135 | Crosslink Density |
| MICROSCOPY | |
| ARDL 3809 | Light Optical (LOM): Carbon Black/Inorganic Filler Dispersion |
| ASTM D 3576 | Light Optical (LOM): Cell Size – Cellular Plastics |
| ARDL 3802 | Light Optical (LOM): Cell Size – Cellular Plastics |
| ARDL 3812 | Light Optical (LOM): Failure Analysis |
| ARDL 3816 | Scanning Electron (SEM/EDX) |
| ARDL 3815 | Scanning Electron: Microdispersion of Inorganic Fillers |
| ARDL 3813 | Scanning Electron: Elemental Analysis |
| ASTM D 3849-95a Historical | Transmission Electron: Primary Aggregate |
| ARDL 3803 | Transmission Electron: Primary Aggregate |
| ARDL 3805 | Transmission Electron: Polymer Morphology |
| POLYMER BARRIER PROPERTIES | |
| ASTM D 1434 (Procedure V) | Determining Gas Permeability Characteristics of Plastic Film and Sheeting |
| ASTM D 6978 | Standard Practice for Assessment of Resistance of Medical Gloves to Permeation by Chemotherapy Drugs |
| ASTM F 739 | Permeation of Liquids and Gases Through. Protective Clothing Materials Under Conditions of Continuous Contact |
| ASTM F1383 | Permeation of Liquids and Gases Through Protective Clothing Materials Under Conditions of Intermittent Contact |
| POLYMER BARRIER PROPERTIES (continued) | |
| ISO 6529 | Protective Clothing – Protection Against Chemicals – Determination of Resistance of Protective Clothing Materials to Permeation by Liquids and Gases |
| BS EN 374-3-2003 (Withdrawn) | Protective Gloves Against Chemicals and Micro-Organisms – Determination of Resistance to Permeation by Chemicals |
| DIN EN 16523-1 | Determination of Material Resistance to Permeation by Chemicals – Permeation by Liquid Chemical Under Conditions of Continuous Contact |
| ASTM E 96/ E 96M | Water Vapor Transmission of Materials |
| ASTM F 903 | Resistance of Materials Used in Protective Clothing to Penetration by Synthetic Blood |
| ASTM F 1670/F 1670M | Resistance of Materials Used in Protective Clothing to Penetration by Synthetic Blood |
| THERMAL | |
| ASTM D 3418 | Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry (DSC) |
| ASTM D 3850 | Rapid Thermal Degradation of Solid Electrical Insulating Materials by Thermogravimetric Method (TGA) |
| ASTM D 3895 | Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry (DSC) |
| ASTM D 4419 | Measurement of Transition Temperatures of Petroleum Waxes by Differential Scanning Calorimetry (DSC) |
| ASTM D 4565 (Sections 17-18) | Physical and Environmental Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable |
| ASTM D 4591 | Determining Temperatures and Heats of Transitions of Fluoropolymers by Differential Scanning Calorimetry (DSC) |
| ASTM D 7426 | Assignment of the DSC Procedure for Determining Tg of a Polymer or an Elastomeric Compound |
| ASTM E 793 | Enthalpies of Fusion and Crystallization by Differential Scanning Calorimetry (DSC) |
| ASTM E 794 | Melting and Crystallization Temperatures by Thermal Analysis |
| ASTM E 1269 | Determining Specific Heat Capacity by Differential Scanning Calorimetry (DSC) |
| ASTM E 1356 | Assignment of the Glass Transition Temperatures by Differential Scanning Calorimetry (DSC) |
| ASTM E 2160 | Heat of Reaction of Thermally Reactive Materials by Differential Scanning Calorimetry (DSC) |
| ASTM F 2625 | Measurement of Enthalpy of Fusion, Percent Crystallinity, and Melting Point of Ultra-High- Molecular Weight Polyethylene by Means of Differential Scanning Calorimetry |
| THERMAL (continued) | |
| ISO 11357-2 | Plastics – Differential Scanning Calorimetry (DSC) – Determination of Glass Transition Temperature and Glass Transition Step Height |
| ISO 11357-3 | Plastics – Differential Scanning Calorimetry (DSC) – Determination of Temperature and Enthalpy of Melting and Crystallization |
| ISO 11357-5 | Plastics – Differential Scanning Calorimetry (DSC) – Determination of Characteristic Reaction– Curve Temperatures and Times, Enthalpy of Reaction and Degree of Conversion |
| ASTM D 5992 | Standard Guide for Dynamic Testing of Vulcanized Rubber and Rubber-Like Materials Using Vibratory Methods |
| ASTM E1640 | Assignment of the Glass Transition Temperature by Dynamic Mechanical Analysis |
| ISO 6721-4 | Plastics – Determination of Dynamic Mechanical Properties – Tensile Vibration – Non-Resonance Method |
| ASTM E 831 | Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis |
| ISO 11359-1 | Plastics – Thermomechanical Analysis (TMA) –General Principles |
| ISO 11359-2 | Plastics – Thermomechanical Analysis (TMA) – Determination of Coefficient of Linear Thermal Expansion and Glass Transition Temperature |
| ASTM D 6370 | Rubber – Compositional Analysis by Thermogravimetry (TGA) |
| ASTM E 1131 | Compositional Analysis by Thermogravimetry |
| ASTM E 2550 | Thermal Stability by Thermogravimetric |
| ISO 9924-1 | Determination of the Composition of Vulcanizes and Uncured Compounds by Thermogravimetric |
| ISO 9924-2 | Rubber and Rubber Products – Determination of the Composition of Vulcanizates and Uncured Compounds by Thermogravimetry –Acrylonitrile-Butadiene and Halobutyl Rubbers |
| ISO 9924-3 | Determination of the Composition of Vulcanizes and Uncured Compounds by Thermogravimetric |
| LEACHING FOR HALIDES AND SULFUR | |
| ASTM D 512 | Standard Test Methods for Chloride Ion in Water |
| ASTM D 516 | Standard Test Method for Sulfate Ion in Water |
| ASTM D 1179 | Standard Test Methods for Fluoride in Water |
| ASTM D 1246 | Standard Test Method for Bromide in Water |
| MIL-STD 2041 E (SH) – Notice 1- Appendix A Section A.6 | Control of Detrimental Materials |
| MIL-STD 2190 (SH)1 (Withdrawn) | Non-Metallic Seal Materials |
| ASTM D 3566 (Sections 9.1-9.15) | Rubber – Determination of Bromine in the Presence of Chlorine by Oxygen Combustion |
| CARBON BLACK | |
| ASTM D 1510 (Method A) | Iodine Adsorption Number |
| ASTM D 2414 | Oil Absorption Number (OAN) |
| ASTM D 1506 | Ash Content |
| ASTM D 1618 | Transmittance of Toluene Extract |
| ASTM D 1619 | Carbon Black – Sulfur Content |
| ASTM D 1508 | Pelleted Fines and Attrition |
| ASTM D 1509 (Method A) | Carbon Black – Heating Loss |
| ASTM D 1514 | Sieve Residue |
| ASTM D 1513 | Pour Density Pelleted |
| ASTM D 1512 | pH Value |
| ARDL 3187 | Calibration of Volumetric Cup Used for ASTM D1513, Pour Density |
| MOISTURE CONTENT BY KARL FISCHER TITRATION | |
| ASTM D 6869 | Coulometric and Volumetric Determination of Moisture in Plastics Using the Karl Fischer Reaction (the Reaction of Iodine with Water) |
| ISO 15512 | Plastics – Determination of Water Content |
| FLASHPOINT | |
| ASTM D 92 | Flash Points and Fire Points by Cleveland Open Cup Tester |
| CONTACT ANGLE DETERMINATION & SURFACE TENSION | |
| ASTM D 5946 | Corona-Treated Polymer Films Using Water Contact Angle Measurements |
| ASTM D 7334 | Surface Wettability of Coatings, Substrates, and Pigments by Advancing Contact Angle Measurement |
| ASTM D 7490 | Measurement of the Surface Tension of Solid Coatings, Substrates, and Pigments Using Contact Angle Measurements |
| ISO 15989 | Plastics – Film and Sheeting – Measurement of Water-Contact Angle of Corona-Treated Films |
| ASTM D1331 (du Noüy Ring Method) | Surface and Interfacial Tension of Solutions of Paints, Solvents, Solutions of Surface-Active Agents, and Related Materials |
| ASTM D 1417 (Section 7) | Rubber Lattices – Synthetic |
| MICROBIOLOGICAL TESTING | |
| ASTM D 5712 | Analysis of Aqueous Extractable Protein in Latex, Natural Robber and Elastomeric Products Using the Modified Lowry Method |
| ASTM D 6499 | Immunological Measurement of Antigenic Protein in Natural Rubber and Its Products |
| ASTM D 7427 | Immunological Measurement of Four Principal Allergenic Proteins (Hev b 1, 3, 5 and 6.02) in Natural Rubber and Its Products Derived from Latex |
| BS EN 455-3 (Section 5.1) | Leachable Proteins in Medical Gloves for Single Use |
| ISO 10993-5 | Tests for in vitro cytotoxicity |
| ASTM F 1671/F 1671M | Viral Penetration |
| ISO 16604 | Viral Penetration Using Phi-X174 bacteriophage |
| AATCC TM 42 | Water Resistance: Impact Penetration |