Clause

Test Requirement

*4.1

General 

4.2

Tolerance

4.3

Water leakage (Maintain 7 Days)

4.4

Minimum performance requirements for structural materials

*4.4.1

General  (prEN 16713-3 shall be met and provide the report. )

4.4.2

Specific requirements and testing for corrosion resistance (192hrs， NSS)

*4.4.3

Osmosis resistance of composites and polymers.
(150 mm x 100, 15 Days（18WDs）, 60°C. Only if client is concerned & new manufacturing process.)

*4.4.4

Wood, 需提供相应木材符合性报告，具体见Remark 1

4.5

Injury Risk

4.6

Accessibility

4.6.1

General

4.6.2

Secure access to the swimming pool

5

Requirements and test methods for means of access（>850mm）

5.1

General 

5.2

Slip resistance, 0.5mX1.0m 做表面处理的样品

5.3

Crushing and entrapment hazards

*5.4

Ladders

5.5

Bearing points

*5.6

Submerged stairs

5.7

Handrails

6

Instructions for the consumer

6.1

General principles

6.2

Self-built/installed pools

6.3

Constructed / installed pools by professionals

6.4

Means of access

6.5

Examples illustrating pool sizes

7

Safety signage

适用范围

Domestic swimming pools

Remark 1:
备注1:

Structural elements made of wood or wood-based material shall meet the following requirements according to EN 335:
— use class 3 if they are not in direct contact with ground and / or fresh water;
— use class 4 if they are in direct contact with ground and / or fresh water.
Compatible woods may be chosen according to two distinct approaches:
— using naturally durable woods (excluding sapwood) as defined in EN 350-2, that meet the requirements for use in applicable hazard classes in EN 460;
— using wood with conferred durability (preservation treatments while conserving the sapwood), that meets the requirements for use in applicable hazard classes in EN 351-1.

Remark 2:
备注2:

The quotation of 4.7 Accessibility doesn't include the specific means of access,  If a specific means of access is used (e.g. ladder) such means of access shall comply with requirements for safe means of access specified in EN 16582-1:2015, 5.4.4.

Sample required:
样品要求:          

3 sets of completed products with assembly instruction (if applicable) is recommended. 
3套完整样品带说明书和适用的安装配件.

Turnaround time:
所需时间:

Normal (12working days)；Express （10 working days）
正常12个工作天，加急10个工作天