EN 13310返回 Back
Test item 测试名称: 
Kitchen Sinks — Functional requirements and test methods 厨房水槽—功能要求及测试方法
Test info 测试内容:
 Clause  Test Requirement
4 Requirement 要求
4.1 General 普通要求
4.2 Connecting dimensions 连接尺寸
4.3 Draining of water 排水测试
4.4 Resistance to dry heat 抗干热性
4.5 Resistance to temperature changes 抗温度改变
4.6 Resistance against chemicals and staining agents 抗化学以及着色性
4.7 Surface stability 表面稳定性
4.7.1 Resistance to scratching 抗刮伤试验
4.7.2 Resistance to abrasion 抗磨损性
4.8 Load stability 负载试验 only for wall-mounted sinks
4.9 Flow rate of the overflow 溢流流速测定
7 Evaluation of conformity 符合性的评估
Sampling requirement: 
2 set of completed samples with assembly instruction (if applicable) & 2pcs*300mm*300mm;1 pc of sample with a diameter 110 mm and a 8 mm hole in the centre
For samples with coating).                   
1套,并伴随安装说明书(如果适用)&2*300mm*300mm; 1片直径为110mm的圆形样品,样品中间有8mm直径的孔(适用于带涂层的产品)。
Turnaround time:
normal (9 working days); express (7 working days)-for SS sink; 
                             (17 working days); express (15 working days)-for Plastic sink
9个工作日); 加快(7个工作日)-不锈钢水槽
                 标准(17个工作日); 加快(15个工作日)-塑料


Sample for reference 参考图片:

Responsive image
Sample Report 报告样本:
Responsive imageResponsive image