BS EN15534-1返回 Back
 
Test or certification item 测试或认证名称:  从纤维素基材料和热塑性塑料制成的复合材料
Composites made from cellulose-based materials and thermoplast

Test Requirement
测试要求
Test Standard
测试标准
Sample requirement(mm)
样品要求(毫米)
TAT
周期
size
尺寸
NO.
数量
Moisture resistance (boiling test)
耐水性(沸水试验)
EN 15534-1 Clause 8.3.3 长度:100mm, 原宽度和厚度 5 7
Swelling and water absorption
吸水率和吸水膨胀率
EN 15534-1 Clause 8.3.1 and EN 317 原材料:80*10*4mm
产品:100mm*原宽*原厚
8 23
Flexural properties (applicable to non-load bearing products) 
弯曲性能
EN 15534-1 Annex A length: 20 times thickness plus 100
full cross section of profile
10 7
Moisture resistance (cycle conditions)
耐水性(循环条件)
EN 15534-1 Clause 8.3.2 and EN 321 length: 20 times thickness plus 100
full cross section of profile
60天 40
Linear thermal expansion coefficient
线性热膨胀系数
EN 15534-1  Clause 9.2 50×50mm, 厚度小于4mm 3 9
Resistance to indentation
耐压痕性
EN 15534-1 Clause 7.5 50x50x厚度 5 7
Falling mass impact resistance
落锤冲击
EN 15534-1 Clause 7.1.2.1 EN 477 (300 ± 1) mm long the actual width and thickness 26 7
Heat build-up
生热测试
EN 15534-1 Clause 9.4 length: 100mm 3 7
Resistance to artificial weathering  (products for external use)
耐人工老化(外部使用产品)
EN 15534-1 Clause 8.1.1  150×70mm 3 视客户测试时间而定
 
Others 其他信息:  
 
Photo for reference 涉及图片:
 
 Responsive image
 
Sample report 样本报告:
Responsive imageResponsive imageResponsive imageResponsive imageResponsive imageResponsive imageResponsive imageResponsive imageResponsive imageResponsive imageResponsive imageResponsive imageResponsive imageResponsive imageResponsive imageResponsive imageResponsive image