ASTM E 162返回 Back

ASTM E 162-2009 Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source 柔性塑料表面可燃性测试
Test Clause Requirement
Conditioning Predry specimens for 24 h at 140°F (60°C) and then condition to equilibrium (constant weight) at an ambient temperature of 73 ± 5°F (23  ± 3°C) and a relative humidity of 50 ± 5 %.
Sample Required:  
8 pieces, 6’"(152mm) wide by 18”(457mm) long by maximum 1” (25.4mm) thickness8 152mm×457mm×实际厚度(一般不大于25.4mm)。
2Materials intended to be applied to a substrate shall be tested on that substrate.对于在实际应用中有确定的应用基材,
3Flexible materials shall be cut to 10 by 22-in. (255 by 560-mm),对于软质材料,提供尺寸为255 by 560-mm

Turnaround time: normal ( 9 working days)

Sample Report 报告样本:
Responsive imageResponsive imageResponsive imageResponsive image
Sample for reference 参考图片:
Responsive image