|
Organiser: |
|
|
Registration: |
By means of the attached form |
|
Intention: |
Confirmation of technical competence of participating laboratories |
|
Data evaluation: |
Based on ISO/IEC 17043 and ISO 13528. Usually the participation is approved
for accreditations according to NADCAP. |
|
Confidentiality: |
Each laboratory receives a specific code number |
|
Documentation: |
Certificate Final report with a list of participants in alphabetical order with declaration of consent; determination of measurement uncertainty according to the current standards and guidelines. |
|
No. AS2001-HB
Hardness testing Brinell |
Test standard: |
ASTM E10, HBW 2,5/187,5 |
|
Material: |
Reference hardness block |
|
|
Test program: |
five hardness measurements on reference hardness block |
|
|
Test sequence: |
Each participant receives a reference specimen. |
|
|
Results to be submitted: |
five hardness values of the hardness blocks |
|
|
Assigned value: |
Certified reference values of MPA NRW Dortmund, Germany |
|
|
Additional information
provided by organiser: |
Statement to measurement uncertainty |
|
|
Participation fee: |
estimated start: III. quarter 2020 |
|
No. AS2001-HR
Hardness testing Rockwell C |
Test standard: |
ASTM E18, HRC |
|
Material: |
Reference hardness blocks |
|
|
Test program: |
3 x five hardness measurements on reference hardness blocks |
|
|
Test sequence: |
Each participant receives three reference specimens. |
|
|
Results to be submitted: |
3 x five hardness values of the hardness blocks |
|
|
Assigned value: |
Certified reference values of MPA NRW Dortmund, Germany |
|
|
Additional information
provided by organiser: |
Statement to measurement uncertainty |
|
|
Participation fee: |
estimated start: III. quarter 2020 |
|
No. AS2001-HV
Hardness testing Vickers |
Test standard: |
ASTM E384 / E92, HV 1 and/or HV 10/HV 30 |
|
Material: |
Certified reference hardness test block (MPA NRW Dortmund, Germany) |
|
|
Test program: |
five hardness measurements on certified reference hardness test block |
|
|
Test sequence: |
Each participant receives a reference specimen. |
|
|
Results to be submitted: |
five hardness values of the hardness test blocks |
|
|
Assigned value: |
Certified reference values of MPA NRW Dortmund, Germany |
|
|
Additional information
provided by organiser: |
Statement to measurement uncertainty |
|
|
Participation fee: |
HV 1 or HV 10/HV 30:
HV 1 and HV 10/HV 30:
estimated start: III. quarter 2020 |
|
No.AS2009R
Tensile test steel (round specimens) |
Test standard: |
ASTM E8/E8M |
|
Material: |
Standard samples: 6 round test specimens, steel, diameter = 9 mm, specimen head: ISO thread M16 (specimen 2, ASTM E8M) as per standard,
Alternate samples: specimens with diameter = 6 mm (specimen 3, ASTM E8M), specimen head: ISO thread M10
and/or 6 material sections, 20 x 20 mm², length 150 mm each |
|
|
Production of specimens: |
by the organiser / by the participants |
|
|
Results to be submitted: |
Characteristic values according to the test standard, additionally “Young's Module” and the measurement uncertainty |
|
|
Assigned Value: |
Consensus values calculated from the results of the participants |
|
|
Additional information: |
Statement to the influence of specimen preparation, measurement uncertainty of
the test method |
|
|
Participation fee: |
AS2009-RM: Machined specimens:
AS2009-RU: Unmachined specimens:
Machined AND unmachined specimens:
estimated start: IV. quarter 2020 |
|
No.AS2010F
Tensile test steel flat specimens, 1-3mm |
Test standard: |
ASTM E8/E8M |
|
Material: |
6 flat specimens, steel, geometry according to ASTM E8/E8M (sheet type), thickness = 1-3 mm, width = 12,5 mm,
and/or 6 material sections of about 32 x 280 mm² each |
|
|
Production of specimens: |
by the organiser / by the participants |
|
|
Results to be submitted: |
Characteristic values according to the test standard, additionally “Young's
Module” and the measurement uncertainty |
|
|
Assigned Value: |
Consensus values calculated from the results of the participants |
|
|
Additional information: |
Statement to the influence of specimen preparation, measurement uncertainty of
the test method |
|
|
Participation fee: |
AS2010FM: Machined specimens:
AS2010FU: Unmachined specimens:
Machined AND unmachined specimens:
estimated start: IV. quarter 2020 |
|
No.AS2011
Charpy impact test ready to test specimens |
Test standard: |
ASTM E23 (8 mm striker) |
|
Material: |
Charpy test specimens, impact energy low level (RT), average level (RT), high level (RT), super high level (RT) |
|
|
Production of specimens: |
by the organiser |
|
|
Results to be submitted: |
5 values according to ASTM E23 each energy level |
|
|
Assigned value: |
consensus value, limits based on ASTM E23 |
|
|
Additional information: |
Statement to the measurement uncertainty of the test method |
|
|
Participation fee: |
One energy level:
Two energy levels:
Three energy levels:
Four energy levels:
estimated start: IV. quarter 2020 |