ANSI/ICPA SS-1返回 Back

Test item 测试名称: Performance Standard for Solid Surface Materials 硬质表面材料性能要求
   
Test info 测试内容:
Clause Test Requirement
  package price (kitchen)  整体价格(用于厨房):
3 General requirement 普通要求
3.1 Composition 构成
3.2 Materials 材料
3.3 Dimensions and tolerances 尺寸以及偏差
3.5 Installation,care, and maintenance instructions 安装,注意以及保养说明
3.7 Identification 鉴别
4 Workmanship and finish 工艺以及外观检查
5 Structural integrity  结构完整性
5.2 Load test 负荷试验
5.3 Impact tests 冲击试验
5.3.1 Point impact 点冲击试验 
5.3.2 Knife drop test 小刀跌落试验 
5.3.3 Skillet drop test 煮锅跌落试验 
6 Physical characteristics of material 材料的物理性状
6.1 Colorfastness and aging test 不退色以及抗老化试验 
6.2 Stain resistance test 抗污染试验 
6.3 Cigarette test 香烟试验 
6.4 Chemical resistance test 抗化学试验 
6.5 Heated pan test 加热平底盘试验
6.6 High Temperature Resistance Test  耐高温试验
6.7 Water resistance Test冷热循环试验
7 Ability to be Fabricated and Renewed 可再造和打磨性

Sampling requirement: 3 sets of completed samples with assembly instruction (if applicable)                                                                                                                                                                                                           Another samples should be supplied.  As follow:                                                                                          

3 pcs of approximately 95mm*95mm & 2 pcs of approximately 150mm*150mm                                       
the flat specimen material made from the same materials as the units; 3 pcs of samples with size 4” X 15”

样品要求:全套样品3套并包含安装说明书(如适用),需要另外提供下面的样品:                              3片尺寸约为95mm*95mm & 2片尺寸约为150mm*150mm的平面样品,样品的材料要与产品材料相同。  34"X15"的样品

Turnaround time: normal (23 working days)
所需时间:标准(23个工作日)

 
Sample for reference 参考图片:

Responsive image
 
Sample Report 报告样本:
Responsive image