HZLAB20261029返回 Back
澳大利亚
|
ASTM E119 ASTM E814 |
Standard methods of Fire Tests of Building Construction and materials Fire Tests of Through-Penetration Fire stops |
| BS 476 Parts 20-24 | Fire tests on Building Materials and Structures |
| EN 1363-1 | Fire resistance tests – Part 1: General requirements |
| EN 1363-2 |
Fire resistance tests – Part 2: Alternative and additional procedures (Clauses 5, External fire exposure curve, 6 Slow heating curve, 8 Measurement of radiation) |
| EN 1364-1 | Non-loadbearing elements – Part 1 Walls |
| EN 1364-2 | Non-loadbearing elements – Part 2 Ceilings |
| EN 1365-1 | Loadbearing elements – Part 1 Walls |
| EN 1365-2 | Loadbearing elements – Part 2 Floors and roofs |
| EN 1366-3 | Service installations – Part 3 Penetration seals |
| EN 1366-4 | Service installations – Linear joint seals |
| EN 1634-1 |
Door and shutter assemblies, openable windows and elements of building hardware – Part 1: Fire resistance tests for door and shutter assemblies and openable windows. |
| EN 13381-4 |
Test methods for determining the contribution of the fire resistance of structural members – Part 4: Applied passive protection to steel members |
| EN 13381-8 |
Test methods for determining the contribution of the fire resistance of structural members – Part 8: Applied reactive protection to steel members |
| NFPA 251 |
Standard methods of Tests of Fire Resistance of Building Construction and Materials |
| NFPA 252 | Standard methods of Fire Tests of Door Assemblies |
| ISO 834-1 | Elements of building construction – Part 1: General requirements |
| ISO 3008 | Door and shutter assemblies |
| ISO 3009 | Elements of building construction – Glazed elements |
| ISO 6944-1 | Fire containment – Elements of building construction – Part 1 Ventilation ducts |
| ISO 10294-1 | Fire dampers for air distribution systems – Part 1 Test method |
| ISO 10294-5 | Fire dampers for air distribution systems – Part 5 Intumescent fire dampers |
| SS 333 clause 5.3 | Fire dampers |
| SS 332 Annex E | Fire doors |
| SS 489 Annex A | Fire shutters |
| UL 9 | Standard for Fire Tests of Window Assemblies |
| UL 10B | Standard for Fire Tests of Door Assemblies |
| UL 10C | Standard for Positive Pressure Fire Tests of Door Assemblies |
| UL 263 | Standard for Fire Tests of Building Construction and Materials |
| UL 555 | Standard for Fire Dampers |
| UL 1479 | Standard for Fire Tests of Through-Penetration Firestops |
| UL 2079 | Standard for Tests for Fire Resistance of Building Joint systems |
| AS/NZS 3837 |
Method of test for heat and smoke release rates for materials and an oxygen consumption calorimeter products using |
| ASTM E 1354 |
Standard test method for heat and visible smoke release rates for products using an oxygen consumption calorimeter |
| ISO 5660.1 |
Reaction to fire tests – Heat release, smoke production and mass Part 1: Heat release rate (cone calorimeter method) |
| ISO 5660.2 |
Reaction to fire tests – Heat release, smoke production and mass Part 2: Smoke production rate (dynamic measurement) |
|
Other fire tests ISO 9705 |
Fire tests – Full scale room test for surface products (and AS ISO 9705) |
|
AS/NZS 4859.1 Section 2.3.3 Section 4 Section 5 Section 6 Section 7 Section 8 Appendix B Appendix C AS/NZS 4859.2 Clause 5.2 ASTM C167 ASTM C1667 ASTM C653 ASTM C687 ISO 8301 |
Thermal insulation materials for buildings Part 1: General criteria and technical provisions Determination of thermal resistance R-value Specimen conditioned Statistically adjusted thermal properties Cellulose fibre insulation Insulation containing wool Low density polyester fibre insulation Low density mineral wool insulation Rigid cellular foam insulation Determination of the thickness and density of compressible fibrous insulation using ASTM C167 with variations Determination of the thermal resistance of loose fill insulation using ASTM C687 with variations Thermal insulation materials for buildings Part 2: Design Adjusting thermal properties to a declared temperature Standard Test Method for Thickness and Density of Blanket of Batt Thermal Insulations Standard Test Method for Using Heat Flow Meter Apparatus to Measure the Center-of-Panel Thermal Transmission Properties of Vacuum Insulation Panels Standard Guide for Determination of the Thermal Resistance of Low-Density Blanket-Type Mineral Fiber Insulation Standard Practice for Determination of Thermal Resistance of Loose-Fill Building Insulation (including cellulose) Thermal insulation — Determination of steady-state thermal resistance and related properties — Heat flow meter apparatus |
| EN 13164 | Thermal insulation products for buildings. Factory made extruded polystyrene foam (XPS) products. Specification, Annex C |
| EN 13165 | Thermal insulation products for buildings. Factory made rigid polyurethane foam (PU) products. Specification, Annex C (including PIR and PUR) |
| EN 13166 | Thermal insulation products for buildings. Factory made phenolic foam (PF) products. Specification, Annex C |
| AS 1530 Part 4 | Methods for fire tests on building materials, components and structures Part 4 Fire resistance tests of elements of construction |
| AS 1530 Part 8.1 | Methods for fire tests on building materials, components and structures Tests on elements of construction for buildings exposed to simulated |
| AS 1530 Part 8.2 | attack – Radiant heat and small flaming sources Methods for fire tests on building materials, components and structures |
| AS/NZS 3013 |
Electrical installations—Classification of the fire and mechanical performance of wiring system elements. Appendix C Fire Test Method—Supports and Fixings |