| EN 15330, synthetic surface 室外用人工草皮和针刺表面 | |
| 以橡胶缓冲无填充物的草坪为例,报价如下: | |
| 人造草坪系统(足球)的产品测试 |
更新于2026年9月1日 DIN EN 15330-1: 4.4.2, 4.4.3, 4.4.4, 4.4.5, 4.4.6, 4.4.7 EUR5395 Testing duration: 4-6 weeks Sample: 10.0 m x 1.0 m Documentation: reduced digital test report including conformity assessment (German or English) |
| 人造草坪地毯产品测试,包括纱线测试(长毛地毯) |
更新于2026年9月1日 DIN EN 15330-1: 4.2.1, 4.2.2, 4.2.3.1, 4.2.3.2, 4.2.4.2, 4.2.5, 4.2. 6, Table 3 (synthetic turf) RAL-GZ 944: Annex C, Annex D DIN 18035-7: Table 15, Table B.1 Testing duration: approx. 6-8 months Sample: 1.5 m x 1.0 m with a seam in the middle of the sample 10 m yarn per type Documentation: reduced digital test report including conformity assessment (German or English) Required documents: technical data sheet |
| 弹性层适用性试验 |
更新于2026年9月1日 DIN EN 15330-4 Sample name: Tested parameters: Shock absorption (23°C, 40°C, 5°C, -5°C, after ageing) Vertical deformation (23°C, 40°C, 5°C, -5°C, after ageing) Vertical water infiltration rate Tensile properties Dimensional stability Resistance against dynamic fatigue after repeated impacts Resistance to residual deformation after short-term load Resistance to residual deformation after static load Thermal resistance (external) Physical description Thickness Weight per unit area Environmental and toxicological properties Testing duration: 8 -10weeks Sample dimensions: 2 samples at approx. 1 m x 1 m each Documentation: reduced digital test report including conformity assessment (German or English) Required documents: technical data sheet manufacturer's information (shock absorption, thickness, tensile strength) |
| 弹性层(EL)在位冲击垫的性能测试 |
更新于2026年9月1日 Performance testing of an in-situ shockpad Standard specification: DIN 18035-7 and EN 15330-1 Sample name: Testing parameters: shock absorption thickness permeability transverse tensile strength tensile strength (before and after ageing) environmental impact assessment Testing duration: 4-6 weeks Sample dimensions: approx. 1 m x 1 m Documentation: reduced digital test report including conformity assessment (German or English) Required documents: technical data sheet manufacturer's infromation (shock absorption, thickness, tensile strength) |
| 用作现场减震垫(EL/ET)组成部分的橡胶颗粒的识别参数 |
更新于2026年9月1日 Specifications: DIN 18035-7, table 16 and 18 Product name: - to be specified Relevant Parameters: - extraction (external) - loss of ignition (550 °C) - grain size Duration of the testing: approx. 6-8 weeks Sample amount: 2 kg |
| 作为现场缓冲垫(EL)组成部分的聚氨酯粘合剂的识别参数 |
更新于2026年9月1日 Specifications: DIN 18035-7, table 16 and 18 Product name: - to be specified Relevant Parameters: - IR spectroscopy (external) - NCO concent (external) - non-volatile content (external) - loss of ignition (550 °C) (external) - density (external) - viscosity (external) - tensile strength on cured film - elongation at break on cured film - E-module on cured film Duration of the testing: approx. 6-8 weeks Sample amount: 3 separate containers with 1l liquid material each |






