TSZ, Tanzania返回 Back
TSZ, Tanzania, 坦桑尼亚国家标准
| TZS No. | Year | Title / Scope |
| TZS 324: 1987 (1st Ed) | 1987 | Textiles – Cotton fibres – Evaluation of maturity – Microscope method |
| Specifies a method for the evaluation of the maturity of raw cotton fibres, or fibres taken from cotton articles which have not been chemically processed. | ||
| ICS: 59.060.10 | ||
| TZS 279:2014 (2nd ed) | 2014 | Textiles – Sanitary towels – Specification |
| Revision | Covers the requirements for sanitary towels for external use. | |
| ICS: 59.080.30 | EAS: 96:2008 | ||
| TZS 930 Part 3 | 2007 | Operation of solar PV power system |
| Specifies requirements for the operation of photovoltaic system. It describes the different types of photovoltaic systems, how they work, what components makes up the systems, and how those components work. | ||
| ICS: 27.160.00 | IEC: 389: 2006 | ||
| TZS 525: 1995 (1st Ed) | 1995 | Paints and varnishes – Examination and preparation of samples for testing |
| Specifies both the procedure for preliminary examination of a single sample as received for testing and the procedure for preparing a test sample by blending and reduction of a series of samples, representative of consignment or bulk of paint, varnish or related product. | ||
| ICS: 87.040 | ||
| TZS 1187 (Part 1): 2010 (1st Ed) | 2010 | Road vehicles- Compressed Natural Gas (CNG) fuel system components part 1: General requirements and definitions |
| Specifies general requirement and definitions of compressed natural gas fuel system components. It also provides general design principles and specification requirements for instruction and marking. | ||
| ICS: 43.060.40 | ISO: 15500-1: 2000 | ||
| TZS 479 | 1991 | Textiles – Woven fabrics – Faults and characteristics – Specification |
| Defines faults in fabrics, method of inspection or testing and where appropriate, acceptable tolerances are given | ||
| ICS: 59.080.30 | ||
| TZS 576 | 1999 | Microbiological specification for prawns , shrimps and lobsters |
| Prescribes the microbiological specifications for frozen raw prawns, shrimps and lobsters tails, frozen cooked prawns, and frozen raw breaded prawns and shrimps | ||
| ICS: 07.100.30 | ||
| TZS 469: 2015 3rd ed- EAS 61: 2014 | 2015 | Opaque beer — Specification |
| Revised | Specifies the requirements and methods of sampling and test for opaque beer. The standard does not cover stout beer. | |
| ICS: 67.160.10 | EAS: 61:2014 | ||
| TZS 1054 | Biological evaluation of medical devices | |
| TZS 912: 2006 (1st Ed) | 2006 | Textiles – Specification for cotton T-shirts |
| Prescribes the constructional and dimensional details and other particulars as a guideline to manufacturers of various types of T-shirts manufactured from 100% cotton yarn. | ||
| ICS: 61.020. | ||
| TZS 738: 2002 (1st Ed) | 2002 | Maize gluten – Specification |
| Prescribes the requirements, methods of sampling and test for maize gluten feed used for livestock feeding | ||
| ICS: 65.120 | ||
| TZS 406:2010 (2nd Ed) | 2010 | Textiles – Cotton drills – Specification |
| Rev | Prescribes constructional details and other particulars of five varieties of cotton drills suitable for making industrial garments and uniforms for schools, prisons, army, police, etc. | |
| ICS: 50.080.30 | ||
| TZS 1 | 2002 | National Flag of Tanzania – Specification |
| 2nd Edition | Prescribes the design, construction details and other particulars of the national flag of Tanzania made of mill spun and loom woven cotton bunting. | |
| | ISO: 59.080.30 | ||
| TZS 302:1988 (1st Ed) | 1988 | Textile – Determination of yarn strength parameters of spun yarn |
| Prescribes methods for determination of yarn strength parameters of yarns spun on cotton system using cotton count and Tex system. | ||
| ICS: 59.080.20 | ||
| TZS 1296: 2010 (1st Ed) | 2010 | Paper, board and corrugated fiberboard - Description and calibration of compressed testing equipment |
| Specifies the essential characteristics and the principles of calibration of compression testing machines used in the testing of paper, board and corrugated fibreboard. | ||
| ICS: 85.100 | ISO: 13820: 1996 | ||
| TZS 362: 2006 (2nd Ed) | 2006 | Unplasticized polyvinyl chloride (PVC) fittings with plain sockets for pipes under pressure – Laying lengths – Metric series |
| Revised | Specifies the series of diameters to be used and the dimensions which are common to all types of unplasticized polyvinyl chloride (PVC) fittings with plain sockets for pipes under pressure, regardless of their method of manufacture (with the exception of fittings fabricated from pipes) and composition. | |
| ICS: 23.040.45 | ISO: 264:1976 | ||
| TZS 733: 2002 (1st Ed) | 2002 | Method of examination for Vibro cholerae in foodstuffs |
| Gives general method for detection of Vibro cholerae (01 and 0139) present in food products intended for human consumption | ||
| ICS: 100.30 | ||
| TZS 340:2009 (2nd ed) | 2009 | Timber – Determination of ultimate stress in compression parallel to grain |
| Revised | Specifies a method for determining the ultimate stress of wood in compression parallel to the grain. | |
| ICS: 79.040 | ||
| TZS 1093-11:2009 (1st Ed) | 2009 | Ceramic tiles – Part 11: Determination of crazing resistance for glazed tiles |
| Defines a test method for determining the crazing resistance of all glazed ceramic tiles except when the crazing is an inherent decorative feature of the product. | ||
| ICS: 91.100.20 | ISO: 10545-11: 1994 | ||
| TZS1447:2011 ISO/IEC 27001: 2005 | 2011 | Information technology - Security techniques information security management systems - Requirements |
| Specifies the requirements for establishing, implementing, operating, monitoring, reviewing, maintaining and improving a documented ISM within the context of the organization’s overall business risks .It specifies requirements for the implementation of security controls customized to the need of individual organization or parts thereof | ||
| ICS: 35.040 | ISO: 27001: 2005 | ||
| TZS 1510: 2013 (2nd Ed) | 2013 | Edible full fat soya flour- Specification |
| Revised | Prescribes requirements and methods of sampling and test for edible full fat soya flour for human consumption. | |
| ICS: 67.060 | EAS: 799:2013 | ||
| TZS 6: 1979 (1st Ed) | 1979 | Guide for the presentation of standards |
| Specifies details of drafting of Tanzania standards specifications, methods of test, glossaries, codes of practice and any other published documents | ||
| ICS: 01.120 | ||
| TZS 1131(Part 1): 2009 (1st Ed) | 2009 | Water Quality – Determination of nitrogen – Part 1: Methods using oxidative digestion with peroxodisulfate |
| Specifies a method for the determination of nitrogen present in water, in the form of free ammonia, ammonium, nitrite, nitrate and organic nitrogen compounds capable of conversion to nitrate under the oxidative conditions described. | ||
| ICS: 13.060.01 | ISO: 11905-1: 1997 | ||
| TZS 1188: 2016 (2nd ed) | 2015 | Dried Mango – Specification |
| Rev | Specifies requirements and methods of sampling and tests for dried mangoes from Mangifera indica intended for direct human consumption or for other use in the food industry.. | |
| ICS: 67.080 | ||
| TZS 241(Part 1):2006 (2nd ed) | 2006 | Metallic materials – Rockwell hardness test – Part 1: Test method (scales A, B, C, D, E, F, G, H, K, N, T) |
| Revision | Specifies the method for Rockwell and Rockwell superficial hardness test (scales and field of application according to Table 1) for metallic materials. | |
| ICS: 77.040.10 | ISO: 6508-1: 2005 | ||
| TZS1438:2011 (1st Ed) ISO10983:1999 | 2011 | Timber structures — Solid timber finger - jointing — Production requirements |
| Specifies requirements for bonded finger joints and minimum requirements for the manufacture of cut, interlocking, bonded finger joints in structural timber members. | ||
| ICS: 91.080.20 | ISO: 10983:1999 | ||
| TZS 205: 1984 (1st Ed) | 1984 | Leather – Physical testing – Measurement of thickness |
| Specifies a method for measurement of the thickness of leather. Method is applicable to all kinds of leather, of any type of tonnage, except for firm leathers of thickness 3 mm of greater. This measurement is valid for both the whole leather and a test sample. | ||
| ICS: 59.140.30 | ||
| TZS 1638:2013(1st Ed) | 2013 | Rubber hoses and hose assemblies- Wire-braid-reinforced hydraulic types for oil-based or water- based fluids- Specification |
| Specification requirements for six types of wire-braid- reinforced hose and hose assembly of nominal size from 5 to 51, plus, for one of the types (type R2ATS), nominal size 63. | ||
| ICS: 83.140.40 | ISO: 1436:2009 | ||
| TZS 267: 1986 (1st Ed) | 1986 | General microbiological method of estimation of amino acids in food and foodstuffs |
| Prescribes a microbiological method for estimation of essential amino acids in food and food stuffs. The method is based on the observation that certain micro-organisms require specific nutrients for growth | ||
| ICS: 07.100.30 | ||
| TZS 1176: 2010 (1st Ed) | 2010 | Water Quality - Detection and enumeration of intestinal Enterococci bacteria – Part 2: Membrane filtration method |
| Specifies a method for detection and enumeration of intestinal enterococci in water by membrane filtration. It is intended for examination of drinking water, water from swimming pools and other disinfected or clean waters. | ||
| ICS: 07.100.20 | ISO: 7899-2: 2000 | ||
| TZS 334:2009 (2nd ed) | 2009 | Timber – Determination of density for physical and mechanical tests |
| Revision | Specifies a method for determining the density (ratio of mass to volume) of timber for physical and mechanical tests both at the moisture content at the time of test and in the constant mass condition, as well as the conventional density | |
| ICS: 79.040 | ||
| TZS 49:2014 (3rd ed) | 2014 | Edible groundnut oil – Specification |
| Revised | Specifies the requirements and methods of sampling and test for edible groundnut oil derived from seeds of Arachis hypogaea L. (groundnuts, peanuts). Does not apply to groundnut oil intended for further processing in order to render it suitable for human consumption. | |
| ICS: 67.200.20 | EAS: 300:2013 | ||
| TZS 522 (Part 3): 1992 (1st Ed) | 1992 | Paints and varnishes – Vocabulary – Part 3: Terminology of resins |
| Defines the terms used for resins. These definitions apply only to paints and varnishes and certain terms have a slightly different meaning in other fields. | ||
| ICS: 01.040.87 | ||
| TZS 1187 (Part 15): 2010 | 2010 | Road vehicles- Compressed Natural Gas (CNG) fuel system components part 15: Gas- tight housing and ventilation hose |
| Specifies test and requirements for the gas- tight housing and ventilation hose, a compressed natural gas fuel system component intended for use on all types of motor vehicles. | ||
| ICS: 43.060.40 | ISO: 15500-15: 2001 | ||
| TZS 1134: 2010 (1st Ed) | 2010 | Hair oil- specification |
| Prescribes the requirement for hair oils and other oil- based cosmetic preparation sold the hair like tonics and hair oil concentrates. | ||
| ICS: 71.100.70 | ||
| TZS 26: 1981 (1st Ed) | 1981 | Textiles – Determination of conductivity, pH, water-soluble matter, chloride and sulphate in aqueous extract |
| Includes two procedures for extracting textile specimens with water under method for determining conductivity, pH value, water-soluble matter, chloride and sulphate content of the extract | ||
| ICS: 59.080.01 | ||
| TZS 359: 1996 (2nd Ed) | 1996 | Methods of test and sampling for flexible polyurethane foam |
| 2nd edition | Prescribes the methods of sampling and test for flexible polyurethane foam for domestic mattresses. | |
| ICS: 83.140 | ||
| TZS 259 Part 4:2012 (2nd ed) | 2012 | Direct exploration of soil and rock types as well as groundwater conditions – Part 4: Identification and description of soil types and rocks |
| Revised | Establishes the basic principles for the identification and classification of soils and rocks on the basis of those material and mass characteristics most commonly used for soils for engineering purposes. | |
| ICS: 13.080 | ||
| TZS 841 Part 8: 2004 (1st Ed) | 2004 | Requirements for silver table and decorative hollowware |
| Specifies materials, performance and marking requirements for silver table and decorative hollowware intended for use at or upon the dining table. | ||
| ICS: 67.250 | ISO: 8442-8:2000 | ||
| TZS 698: 2012 (2nd Ed) | 2012 | Road vehicles – Code of practice for inspection and testing of used motor vehicles for road worthiness |
| Rev | Specifies the safety related performance characteristics of used motor vehicles and their inspections and tests for roadworthiness. | |
| ICS: 43.100. | ||
| TZS 318(Part 1): 1999 (1st Ed) | 1999 | Petroleum jelly for cosmetic industry – Part 1: Specification |
| Prescribes the requirements and methods of sampling and test of petroleum jelly for cosmetic industry. | ||
| ICS: 71.100.70 | ||
| TZS 1452-7: 2012 (1st Ed) | 2012 | Materials and Articles in contact with foodstuffs – Plastics – Part 7: Test methods for overall migration into aqueous food simulants using a pouch |
| Specifies test methods for the determination of the overall migration into aqueous based food simulants from plastics which are intended to come into contact with foodstuffs, by forming the plastics film or sheet into standard pouches and filling with a selected food simulant at test temperatures up to and including 70 ºC for selected test times | ||
| ICS: 85.060 | ||
| TZS 90 (Part 1): 1989 (1st Ed) | 1989 | Water, sewage and industrial effluents – Part 1: Glossary of terms |
| Defines the terms widely used in relation to water, sewage and industrial effluents. | ||
| ICS: 13.060.30 | ||
| TZS 764: 2003 (1st Ed) | 2003 | Brewing barley – Specification |
| Prescribes requirements, methods of sampling and test for brewing barley | ||
| ICS: 67.060.00 | ||
| TZS 425: 1989 (1st Ed) | 1989 | Wet leather and pelts – Determination of moisture |
| Prescribes a procedure for the rapid determination of moisture in wet leather and pelts | ||
| ICS: 59.140.20 | ||
| TZS 679 | 2002 | Crude petroleum and liquid petroleum products – Laboratory determination of density – Hydrometer method |
| Specifies a method for the laboratory determination, using a glass hydrometer, of the density at 15 0C of crude petroleum products, and mixtures of petroleum and non-petroleum products normally handled as liquids and having a Reid vapour pressure (PVP) of 100 kPa or less. | ||
| ICS: 75.080.00 | ISO: 3675: 1998 | ||
| TZS 282 | 1989 | Facing and burnt clay bricks and blocks for walling – Specification |
| Specifies the requirements and the test methods for facing and common burnt bricks and blocks for walling | ||
| ICS: 91.100.01 | ||
| TZS 1302: 2010 (1st Ed) | 2010 | Standard practice for vibration testing of shipping containers |
| Covers vibration tests procedure of filled shipping containers. Such tests may be used to assess the performance of a container, with its interior packing and means of closure, both in terms of its strength and of the protection it provides its contents when it is subjected to vibration such as it experiences in transportation. | ||
| ICS: 55.180.40 | ||
| TZS 584: 2003 (1st Ed) | 2003 | Wafers – Specification |
| Prescribes requirements and methods of sampling and test for wafers. | ||
| ICS: 67.230 | ||
| TZS 1661:2014(1st Ed) | 2014 | Code of practice for inspection and acceptance criteria for used footwear (mitumba) |
| Prescribes code of practice for the inspection and acceptance criteria for used footwear in the country | ||
| ICS: 61.060 | ||
| TZS 1418: 2011 (1st Ed) | 2011 | Agricultural equipment – Soil tillage and equipment – Terminology |
| Includes the definitions used in the general classification, design, construction, operation and performance of tillage equipment and soil-tool relationships. | ||
| ICS: 65.060.20 | ||
| TZS 1298: 2010 (1st Ed) | 2010 | Sharps container - specification |
| Specifies requirements for sharps containers intended to hold potentially infectious medical waste comprised largely of devices which can readily cause physical injury, e. g scalpels, blades, hypodermic needles and syringes. | ||
| ICS: 11.140 | ||
| TZS 598: (Part 1): 2010 (2nd Ed) | 2010 | Automotive engineering – Bus bodybuilding – Part 1: Terms and definitions |
| Revised | Defines terms relating to issues of safety for the bus body building. It does not deal with measurement methods, or with the accuracy required, or with the order of magnitude of dimensions defined. | |
| ICS: 43.040.60 | ||
| TZS 118:2007(2nd Ed) | 2007 | Microbiology of food and animal feeding stuffs – Horizontal method for the enumeration of microorganisms – Colony-count technique at 30oC |
| Revised | Specifies a horizontal method for the enumeration of micro-organisms by counting the colonies growing in a solid medium after aerobic incubation at 30ºC. It is applicable to products intended for human consumption or feeding of animals. | |
| ICS: 07.100.30 | ISO: 4833:2003 | ||
| TZS 454: 2007 (2nd Ed) | 2007 | Cigarettes – Specification |
| Rev | Specifies the requirements and methods of sampling and test for cigarettes. | |
| ICS: 65.160 | EAS: 110:2005 | ||
| TZS 1618:2014(1st Ed) | 2014 | Textile- Disposable adult diapers- Specification |
| Specifies the requirements for disposable adult diapers. | ||
| ICS: 59.080.30 | ||
| TZS 224 Part 4:1984 | 1984 | Surface active agents – Methods for performance tests Relative detergency |
| Prescribes a method for determining the relative detergency of surface active agents used for the purpose of cleaning cotton and other textile fabrics. The method is also applicable to surface active agents containing optical brightening agents. | ||
| ICS: 71.100.40 | ||
| TZS 498:2010: (2nd Ed) | 2010 | Sodium hydroxide for industrial use – Determination of mercury content - Flameless atomic absorption spectrometric method |
| Rev | Specifies two methods of determination of mercury content in sodium hydroxide; the flameless atomic absorption spectrometric method and the dithizone photometric method | |
| ICS: 71.060.50 | ISO: 5993: 1979 | ||
| TZS 355 (Part 1): 2010 (2nd Ed) | 2010 | Agricultural wheeled tractors – Rear mounted three-point linkage – Part 1: Categories 1n, 1, 2n, 2, 3n, 3, 4n and 4 |
| Revised | Specifies the requirements of the three point linkage for the attachment of implements or equipment to the rear of agricultural wheeled tractors. | |
| ICS: 65.060.20 | ||
| TZS 1305: 2011 (1st Ed) ISO 7010: 2003 | 2011 | Graphical symbols - Safety colours and safety signs - Safety signs used in workplaces and public areas |
| Prescribes safety signs for the purposes of accident prevention, fire protection, health hazard information and emergency evacuation | ||
| ICS: 01.080.10; 01.080.20 | ISO: 7010:2003 | ||
| TZS 800: 2004 (1st Ed) | 2004 | Disinfectants – Glossary of terms |
| Defines terms used in the disinfectants industry | ||
| ICS: 11.080.20 | ||
| TZS 760 (Part 1): 2002 (1st Ed) | 2002 | Methods of testing cement – Part 1- Determination of strength |
| Describes a method of determining the compressive and flexural strengths of cement mortar. It describes the reference procedures; it allows the use of alternative procedures only in well-defined cases provided they do not affect the results significantly as specified in clause 11. In case of a dispute, only the reference procedure in this standard is used, excluding any alternatives. | ||
| ICS: 91.100.10 | ||
| TZS 742: 2010 (2nd Ed) | 2010 | Oilseeds – Sampling |
| Rev | Specifies methods of sampling oilseeds. | |
| ICS: 67.200.20 | ISO: 542: 1990 | ||
| TZS 434: 2014 (2nd Ed) | 2014 | Chutneys – Specification |
| Revised | Specifies the requirements and methods of sampling and test for chutneys | |
| ICS: 67.220.10 | ||
| TZS 1236:2014 | 2014 | Group of cheeses in brine (Feta) — Specification |
| Specifies requirements, methods of test and sampling for cheeses in brine (Feta) intended for direct consumption or for further processing. | ||
| ICS: 67.100.30 | ||
| TZS 1113:2009 (1st Ed) | 2009 | Depots for the storage of petroleum products. |
| Prescribes the technical requirements relating to the design, materials, construction, testing and layout of bulk plant depots and terminals used for the storage of petroleum products and also include safety distances and specifies product storage systems, firefighting systems, plant/equipment layout and electrical systems required for such storage plants and terminals. | ||
| ICS: 75.200 | ||
| TZS 585: 2011 (2nd Ed) | 2011 | Ready to drink non-carbonated non-alcoholic beverage – Specification |
| Revised | Specifies requirements and methods of test for ready to drink non-alcoholic and non-carbonated beverages intended for direct human consumption | |
| ICS: 67.160.30 | ||
| TZS 616: 1999 (1st Ed) | 1999 | Durum wheat semolina – Specification |
| Prescribes the requirements and methods of sampling and test of semolina for human consumption. | ||
| ICS: 67.060 | ||
| TZS 1660:2014(1st Ed) | 2014 | Polyurethane (PU) coated leather — Specification |
| Prescribes requirements, methods of sampling and test for polyurethane (PU) coated leather. | ||
| ICS: 59.080.40 | ||
| TZS 74: 1980 (1st Ed) | 1980 | Sulphuric acid – Specification |
| Prescribes the requirements, test and sampling methods for four grades of sulphuric acid, that is technical, battery (concentrated and diluted), and pure and analytical reagents | ||
| ICS: 71.060 | ||
| TZS 127: 2006 (2nd Ed) | 2006 | Microbiology – General guidance for the detection of Vibrio parahaemolyticus (Identical to) |
| Rev | Gives general guidance for the detection of Vibrio parahaemolyticus present in products intended for human consumption and animal feeding stuffs | |
| ICS: 07.100.01 | ISO: 8914:1990 | ||
| TZS 1162: 2015- ISO 1575: 1987 | 2015 | Tea — Determination of total ash |
| New | Specifies a method for the determination of the total ash from tea. | |
| ICS: 67.140.10 | ISO: 1575: 1987 | ||
| TZS 16 | 1979 | Steel – Clout or slate nail – Specification |
| Specifies quality requirements and sampling of clout or slate nails made from mild steel round wire | ||
| | ISO: 21.060.50 | ||
| TZS 10 | 2009 | General requirements for the supply of metallurgical materials |
| It has been prepared with a view to unify certain clauses covering the general requirements for the supply of materials as given in Tanzania standard specifications on metals and metal products. The standard does not cover all other provisions relating to a contract, which should be separately agreed between the contracting parties. | ||
| TZS 935: 2013- ISO 361: 1975 (3rd Ed) | 2013 | Basic ionizing radiation symbol |
| Revised | Specifies the symbol to be used to signify the actual or potential presence of ionizing radiation and to identify objects devices, materials or combinations of materials which omit ionizing radiation. | |
| ICS: 13.280. | ISO: 361: 1975 | ||
| TZS 1452-5: 2012 (1st Ed) | 2012 | Materials and articles in contact with foodstuffs – Plastics – Part 5: Test methods for overall migration into aqueous food simulants by cell |
| Specifies test methods for the determination of the overall migration into aqueous based food simulants from one surface only of plastics, which are intended to come into contact with foodstuffs, by exposing the food contact surface, using a cell, to the selected food simulant at temperatures up to and including 70°C for selected test times. | ||
| ICS: 67.250 | ||
| TZS 1251: 2010 (1st Ed) | 2010 | Documentation- spine titles on books and other publications |
| Establishes rules for general layout (position and orientation) and use of spine tiles and corresponding text used on books, serial publications, periodicals, reports and other forms of documentation such as cases, cassettes and comparable items intended for placing on other shelves. | ||
| ICS: 01.140.40 | ISO: 6357: 1985 | ||
| TZS 521 (Part 3): 1992 (1st Ed) | Methods of high voltage testing – Part 3: Measuring devices | |
| States the requirements which the measuring systems shall meet and describes some of the devices which are used. | ||
| ICS: 29.020 | ||
| TZS 335:2009 (2nd ed) | 2009 | Timber – Determination of volumetric shrinkage |
| Revision | Specifies two methods for the determination of the volumetric shrinkage of wood: the stereometric method and the mercury volumenometer method. | |
| ICS: 79.040 | ||
| TZS1438:2011 (1st Ed) ISO10983:1999 | 2011 | Timber structures — Solid timber finger - jointing — Production requirements |
| Specifies requirements for bonded finger joints and minimum requirements for the manufacture of cut, interlocking, bonded finger joints in structural timber members. | ||
| ICS: 91.080.20 | ISO: 10983:1999 | ||
| TZS 884:2014 | 2014 | Pomades and solid brilliantines — Specification |
| Specifies requirements and methods of sampling and test for pomades and solid brilliantines for general use.It applies to pomades and solid brilliantines which are either vegetable oil or petroleum based but excludes oil emulsions. It does not cover liquid brilliantines | ||
| ICS: 71.100.70 | EAS: 342:2013 | ||
| TZS 837 (Part 5): 2011 (2nd Ed) | 2011 | Stationary source emissions – Determination of mass concentration of nitrogen oxides: Naphthylethylenediamine photometric method |
| Revised | Specifies a photometric method for the determination of the mass concentration of nitrogen oxides in exhaust gases from ducts or chimneys. | |
| ICS: 13.040.40 | ISO: 11564:1998 | ||
| TZS 1391:2011 (1st Ed) | 2011 | Refined mustard oil – Specification |
| Prescribes the requirements, methods of sampling and test for refined mustard oil. | ||
| ICS: 67.100.10 | ||
| TZS 1533: 2012 | 2012 | Quality management system - Guidelines for quality plans |
| Provide guidelines for the development, review, acceptance, application and revision of quality plans. It is applicable whether or not the organization has a management system in conformity with ISO 9001. | ||
| ICS: 03.120.10 | ISO: 10005:2005 | ||
| TZS 412: 1989 (1st Ed) | 1989 | Textiles – Method of test for abrasion resistance of fabrics |
| Specifies a method of test for abrasion resistance of knitted and woven fabrics | ||
| ICS: 59.080.30 | ||
| TZS 14:2009 (2nd ed) | 2009 | Steel – Plain carbon – Determination of sulphur by combustion method |
| Revised | Covers methods for the determination of sulphur in plain carbon steel by combustion method. | |
| ICS: 71.040.40 | ||
| TZS 878: 2006 (1st Ed) | 2006 | Crystalline silicon terrestrial photovoltaic (PV) modules – Design qualification and type approval |
| Lays down requirements for the design qualification and approval of terrestrial photovoltaic modules suitable for long-term operation in moderate open air climates, as defined in IEC 60721-2-1. | ||
| ICS: 27.160 | EAS: 364:2005 | ||
| TZS 1513: 2012 (1st Ed) | 2012 | Marble tiles and slabs – Specification |
| Specifies the materials characteristics, physical requirement, sizes and finish of marble tiles and slabs. | ||
| ICS: 91.100.99 | ||
| TZS 721:2008 (1st Ed) | 2008 | Specification for road marking paints |
| Specifies the requirements for paints, in containers, for use in marking on bituminous and concrete surfaces | ||
| ICS: 87.040 | ||
| TZS 1641:2013 | 2013 | Rubber hoses and hose assemblies for underground mining- Wire-reinforced hydraulic types for coal mining- Specification |
| Specifies requirements for six types of embedded-wire hose and hose assembly of bore diameter from 5 mm to 51 mm for use with common hydraulic fluids such as mineral oils, soluble oils, oil and water emulsions, aqueous glycol solution and water at temperatures ranging from -40oC to +100 o C for types 1 to 5 and from -40o C to +121 o C for type 6. | ||
| ICS: 83.140.40 | ISO: 6805:1994 | ||
| TZS 672: 2012 (4th Ed) | 2012 | Automotive gasoline (premium motor spirit) – Specification |
| Revised | Specifies requirements and methods of test for automotive gasoline, Premium Motor Spirit, PMS | |
| ICS: 75.160. | ||
| TZS 1231 (Part 1): 2010 (1st Ed) | 2010 | Motor cycles for general use – Part 1: Specification for two wheeled motorcycles |
| Specifies the safety related performance characteristics of the two wheeled motor cycles. It covers the mopeds as motor cycles without considering. | ||
| ICS: 43.140 | ||
| TZS 559: 2010 (2nd Ed) | 2010 | Palm Olein – Specification |
| Revised | Prescribes the requirements and methods of sampling and test for crude palm olein; neutralized/refined and bleached palm olein; neutralized/refined, bleached and deodorized palm olein which must have been obtained from a one stage fractionation process; including neutralized/refined, bleached and deodorized palm olein obtained from a one stage fractionation and finally in the process, refractionated and filtered (double fractionated). | |
| ICS: 67.200.10 | ||
| TZS 217: 1984 (1st Ed) | 1984 | Gaseous oxygen (technical grade) – Specification |
| Prescribes requirements and method of sampling and test for gaseous oxygen (technical grade) intended for industrial use. | ||
| ICS: 71.060.01 | ||
| TZS 1419 (Part 2): 2011 (1st Ed) | 2011 | Furniture — Chairs and tables for educational institutions – Part 2: Safety requirements and test methods |
| Specifies safety requirements and test methods for plastic chairs and tables for general educational purposes in educational institutions. It does not apply to computer related and special purpose workstations, e.g. offices, laboratories, ranked seating, workshops, and spaces for design and technology | ||
| ICS: 97.140 | ||
| TZS 654 (Part 2): 2004 (1st Ed) | 2004 | Soil test methods – Classification – Part 2 – Determination of Atterberg limits |
| Specifies method for laboratory determination of liquid limit, plastic limit and derivation of plasticity and liquidity indices, which are commonly known as Atterberg limits of the air-dried soil. These methods may also be used on a sample of soil in its natural state. | ||
| ICS: 13.080.20 | ||
| TZS 1518 (Part 4): 2012 (1st Ed) | 2012 | Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V Part 4: Sheathed cables for fixed wiring |
| Specifies the particular specification for light polyvinyl chloride sheathed cables of rated voltage of 300/500 V. | ||
| ICS: 29.060.20 | EAS: 499-4:2008 | ||
| TZS 507: 1999 (1st Ed) | 1999 | Sodium bicarbonate – Specification |
| Prescribes the requirements and methods of sampling and test for sodium bicarbonate | ||
| ICS: 71.040.50 | ||
| TZS 322: 1987 (1st Ed) | 1987 | Textiles – Cotton fibres – Determination of length (span length) and uniformity index |
| Specifies a method of test for the determination of the length usually referred to as ‘span length’ and uniformity index of cotton fibres by scanning test beard in an optical device. | ||
| ICS: 59.060.10 | ||
| TZS 15 | 2009 | Steel – Determination of phosphorus by alkali metric method |
| Rev | Describes a method for determination of phosphorus in plain carbon steel and alloy steels containing neither titanium nor zirconium. | |
| ICS: 71.040.40 | ||
| TZS 294 | 1989 | Building drawings – Scales |
| Specifies recommended scales and building designation for use on building drawings | ||
| ICS: 01.100.30 | ||
| TZS 586: 2001 (1st Ed) | 2001 | Lime (quick lime and hydrated) - Chemical industries – Specification |
| Prescribes the requirements for quality quicklime and hydrated lime of various grades. | ||
| ICS: 71.100.35 | ||
| TZS 320:2012 (2nd ed) | 2012 | Textiles – Absorbent cotton wool for medical use – Specification |
| Revised | Prescribes the requirements of absorbent cotton wool for medical use. | |
| ICS: 59.080 | ||
| TZS 931: 2007 (1st Ed) | 2007 | Protection against ionizing radiation – Limits for occupational exposure |
| Aims at protecting workers, whose practices expose them to ionizing radiation, namely; gamma and X rays, alpha, beta and other particles that can induce ionization. | ||
| ICS: 13.280. | ||
| TZS 990: 2009 | 2009 | Solid fertilizers – Determination of moisture content |
| Describes the methods for the determination of moisture content in solid fertilizers | ||
| ICS: 29.220.20 | ||
| TZS 310: 1988 (1st Ed) | 1988 | Textiles – Method for determination of trash content of cotton and trash and lint content of waste by means of mechanical pneumatic machines |
| Specifies the method for determining both the trash content of raw cotton taken from bales, laps, silvers, flat strips, cylinder strips, camber waste, the lint and trash content of wastes such as opener droppings and card taken in droppings by means of Shirley Analyzer. | ||
| ICS: 59.080 | ||
| TZS 657: 2011 (1st Ed) | 2011 | Glossary of terms used in timber industry |
| Covers definition of terms used in the timber industry | ||
| ICS: 01.040.79 | ||
| TZS 609: 2015- ISO 1063: 1974 | 2015 | Surface active agents — Determination of stability in hard water |
| New | Specifies a method for assessing the stability in hard water of surface active agents which are readily soluble at ambient temperatures or slightly higher temperatures | |
| ICS: 71.100.40 | ISO: 1063:1974 | ||
| TZS 1440: 2011 (1st Ed) ISO 22389-1: 2010 | 2011 | Timber structures — Bending strength of I-beams - Part 1: Testing, evaluation and characterization |
| the requirements for prefabricated wood-based I-beams used as structural members in bending applications. | ||
| ICS: 91.080.20 | ISO: 22389-1: 2010 | ||
| TZS 341:2009 (2nd ed) | 2009 | Timber – Determination of ultimate tensile stress parallel to grain |
| Revised | Specifies a method for determining the ultimate tensile stress of wood parallel to the grain. | |
| ICS: 79.040 | ||
| TZS 1419 (Part 1): 2011 (1st Ed) | 2011 | Furniture — Chairs and tables for educational institutions - Part 1: Functional dimensions. |
| Specifies functional dimensions and markings for chairs and tables for general educational purposes in educational institutions. It includes fixed height and adjustable furniture as well as standing work height tables for use without chairs. It applies to furniture for use with laptop computers or portable devices, but not to special purpose workstations, e.g. laboratories, ranked seating and workshops. | ||
| ICS: 97.140 | ||
| TZS 1118:2009 (1st Ed) | 2009 | Environmental management – Environmental performance evaluation- Guidelines |
| Gives guidance on the design and use of environmental performance evaluation within an organization. It is applicable to all organizations, regardless of type, size, location and complexity. | ||
| ICS: 13.020.10 | ISO: 14031:1999 | ||
| TZS 454: 2007 (2nd Ed) | 2007 | Cigarettes – Specification |
| Rev | Specifies the requirements and methods of sampling and test for cigarettes. | |
| ICS: 65.160 | EAS: 110:2005 | ||
| TZS 70: 1980 (1st Ed) | 1980 | Coloured chalks, moulded – Specification |
| Prescribes the requirements, sampling and test methods of coloured moulded chalks intended primarily for writing on boards with smooth surface | ||
| ICS: 97.180 | ||
| TZS 302:1988 (1st Ed) | 1988 | Textile – Determination of yarn strength parameters of spun yarn |
| Prescribes methods for determination of yarn strength parameters of yarns spun on cotton system using cotton count and Tex system. | ||
| ICS: 59.080.20 | ||
| TZS 100: 2015- EAS 16: 2010 (4th ed) | 2015 | Plantation white sugar – Specification |
| Revision | Specifies the requirements, methods of sampling and testing for plantation or mil white sugar intended for human consumption. | |
| ICS: 67.180.10 | EAS: 16:2010 | ||
| TZS 1592-2:2013 | 2013 | Motorcycle tyre and rims (Code- designated series)- Part 2: Tyre load ratings |
| Specifies the load ratings for an inch code-designated series of tyres for motorcycles. | ||
| ICS: 43.140 | ISO: 4249-2:1990 | ||
| TZS 1425: 2011 (1st Ed) | 2011 | Textile - Sewing threads Specification - Sewing threads made wholly or party from synthetic fibres |
| Specifies minimum requirements for industrial and domestic sewing thread containing synthetic material. It deals with industrial and domestic sewing threads made from different substratesand a combination of various substrates: | ||
| Continuous filament polyester, staple fibre polyester, airjet textured polyester, false twist textured polyester, continuous filament nylon 6.6, staple fibre and Continuous filament aramid, false twist textured nylon 6.6, polyester and cotton core spun (Continuous filament polyester core, cotton sheath), polyester and polyester core spun (Continuous filament polyester core, staple spun polyester sheath) | ||
| ICS: 59.080.20 | ||
| TZS 353: 2014 (3rd Ed) | 2014 | Galvanized corrugated iron sheets – Specification |
| Revised | Specifies the materials, profiles and dimensions of hot-dip zinc coated corrugated steel sheets. | |
| ICS: 77.140. 01 | ||
| TZS 1214: 2016 (1st ed) | 2016 | Camembert cheese — Specification |
| New | Specifies requirements, methods of sampling and test for camembert cheese intended for direct human consumption | |
| ICS: 67.100.30 | ||
| TZS 1422: 2011 | 2011 | Textiles-Woven, non woven, knitted and lace household curtain and drapery fabrics –Specifications |
| Covers a wide range of curtaining and drapery fabric materials produced from natural and synthetic fibres with the exception of steel and glass fibres | ||
| ICS: 59.080 | ||
| TZS 1082: 2015(1st Ed) | 2015 | Dried banana — Specification |
| New | prescribes requirements and methods of sampling and test for dried banana from Musa spp. of the family Musaceae intended for direct human consumption or for other use in the food industry. | |
| ICS: 67.080 | ||
| TZS 700: 2003 (1st Ed) | 2003 | Guide for the inclusion of environmental aspects in product standards |
| Covers the consideration of environmental impacts in product standards | ||
| ICS: 13.020.10 | ISO: 64: 1997 | ||
| TZS 118:2007(2nd Ed) | 2007 | Microbiology of food and animal feeding stuffs – Horizontal method for the enumeration of microorganisms – Colony-count technique at 30oC |
| Revised | Specifies a horizontal method for the enumeration of micro-organisms by counting the colonies growing in a solid medium after aerobic incubation at 30ºC. It is applicable to products intended for human consumption or feeding of animals. | |
| ICS: 07.100.30 | ISO: 4833:2003 | ||
| TZS 399: 1990 (1st Ed) | 1990 | Compound pig feeds – Specification |
| Prescribes the requirements and methods of sampling and test for compounded pig feeds | ||
| ICS: 65.120 | ||
| TZS 421:1989 (1st Ed) | 1989 | Ball point pen refills – Specification |
| Prescribes the requirements for ball point pen refills made entirely from metal and plastic materials | ||
| ICS: 97.180.00 | ||
| TZS 159: 2006 (2nd Ed) | 2006 | Fertilizers – Methods of sampling |
| Rev | Prescribes the methods of drawing samples from bags as well as from wagons, truck loads or from flowing streams and from transfer belts. It is intended to provide guidance in taking representative samples of fertilizers for analysis | |
| ICS: 65.080. | ||
| TZS 1589:2013 | 2013 | Societal security- Business continuity management systems- Requirements |
| Specifies requirements to plan, establish, implement, operate, monitor, review, maintain and continually improve a documented management system to protect against, reduce the likelihood of occurrence, prepare for, respond to, and recover from disruptive incidents when they arise. | ||
| ICS: 03.100.01 | ISO: 22301:2012 | ||
| TZS 85:1980 (1st Ed) | 1980 | Paper tapes – Gummed – Specification |
| Covers gummed paper tapes made by coating uniformly one side of Kraft paper with a water-soluble adhesive composition. Prescribes requirements for raw materials, dimensions, adhesion, performance and bust factor | ||
| ICS: 85.060 | ||
| TZS 304:2012 (2nd ed) | 2012 | Pineapple juice – Specification |
| Revision | Prescribes requirements and method of sampling and test for pineapple juice. | |
| ICS: 67.160.20 | ||
| TZS 476: 1992 (1st Ed) | 1992 | Rubber – Preparation of test pieces for chemical test |
| Specifies methods of preparing samples from vulcanized rubber for use in chemical test. | ||
| ICS: 83.060.00 | ISO: 4661 – 2: 1987 | ||
| TZS 1614:2014(1st Ed) | 2014 | Hot-rolled steel bars — Part 3: Dimensions of flat bars |
| Specifies dimensions of metric series hot- rolled steel round bars | ||
| ICS: 25.100.70 | ISO: 1035-3:1980 | ||
| TZS 1153: 2010 (1st Ed) | 2010 | Green Coffee – Determination of proportion of insect- damaged beans |
| Describes the types of damage caused by insects to green coffee beans and specifies a method for the determination of the proportion of insect- damaged beans in a lot of green coffee together with the statistical use of the result obtained for technical, commercial and arbitration purposes. | ||
| ICS: 67.140.20 | ISO: 6667: 1985 | ||
| TZS 629: 2001 (1st Ed) | 2001 | Class 0.5, 1 and 2 alternating current watt-hour meter – Specification |
| It applies to induction type watt-hour meters of accuracy classes 0.5, 1 and 2, for the measurement of alternating current electrical active energy of a frequency in the range of 45 Hz to 65 Hz and applies to their type set only. It also applies to assembly of meters and accessories including current transformers, when enclosed in the meter cases. | ||
| ICS: 91.140.50 | ||
| TZS 122: 2007 (3rd ed) | 2007 | Microbiology of food and feeding stuffs – Horizontal method for the detection of salmonella spp |
| Revised | Specifies a horizontal method for the detection of Salmonella including Salmonella typhi and Salmonella paratuphi | |
| ICS: 07.100.30 | ISO: 6579:2002 | ||
| TZS 614: 1999 (1st Ed) | 1999 | Junction boxes for use in electrical installations with rated voltages not exceeding 250V – Specificati |
| Specifies requirements of junction boxes of surface or flush mounting types for use in fixed wiring installation in a.c. and d.c. circuits where the rated voltage do not exceed 250V and where the conductors are not subject to mechanical tension in normal use. | ||
| ICS: 29.120.30 | ||
| TZS 1093-8:2009 (1st Ed) | 2009 | Ceramic tiles- Part 8: Determination of liner thermal expansion |
| Defines a test method for determining the coefficient of liner thermal expansion of ceramic tiles | ||
| ICS: 91.100.20 | ISO: 10545-8: 1994 | ||
| TZS 1320:2010 (1st Ed) ISO 6571:2008 | 2010 | Spice, condiments and herbs - Determination of volatile oil content (hydrodistillation method) |
| Specifies a method for the determination of the volatile oil content of spices, condiments and herbs. | ||
| ICS: 67.200.10 | ISO: 6571:2008 | ||
| TZS 387: 1989 | 1989 | Timber – Grading of coniferous sawn timber (cypress and pine) |
| Specifies the method of grading coniferous sawn timber (cypress and pine) namely visual stress grading. It defines some important terms of timber. The timber to be graded should be at a moisture content not more than 22% | ||
| ICS: 01.040.79 | ||
| TZS 269: 1986 (1st Ed) | 1986 | General method for estimation of ascorbic acid (Vitamin C) in food and foodstuffs |
| Specifies method for estimation of Vitamin C in food and foodstuffs | ||
| ICS: 67.050 | ||
| TZS 142-3: 2015 | 2015 | Steel for the reinforcement of concrete — Part 3: Welded fabric |
| Revised | Specifies technical requirements for factory made sheets or rolls of welded fabric, manufactured from st~eel wires or bars with diameters from 4 mm to 16 mm and designed for the reinforcement of concrete structures and the ordinary reinforcement of prestressed concrete structures. | |
| ICS: 77.140.15 | ISO: 6935-3: 1992 | ||
| TZS 1244: 2010 (1st Ed) | 2010 | Pasteurized ulanzi Bamboo Alcoholic drink-Specification |
| Specifies requirements and methods of sampling and test for pasteurized ulanzi (bamboo alcoholic drink) | ||
| ICS: 67.160.10 | ||
| TZS 1670: 2014 (1st Ed) | 2014 | Finger millet grains — Specification |
| Specifies the requirements and methods of sampling and test for finger millet grains of varieties (cultivars) grown from Eleusine coracana (L.) Gaertner intended for human consumption. | ||
| ICS: 67.060 | EAS: 758:2013 | ||
| TZS 271:2014 (3rd ed) | 2014 | Edible palm oil – Specification |
| Revision | Prescribes the requirements and methods of sampling and test for palm oil | |
| ICS: 67.200.20 | EAS: 301:2013 | ||
| TZS 937: 2013 (2nd Ed) | 2013 | Radionuclide gauges – Gauges designed for permanent installation |
| Revised | Its purpose is to establish the following characteristics for radionuclide gauges designed for permanent installation: a classification of the gauges and shielding devices; technical construction and performance requirements for radiation protection when using radioactive sources; control and test methods to verify the compliance of the gauges with those requirements; and indication to be shown on the gauges. | |
| ICS: 13.280. | ISO: 7205: 1986 | ||
| TZS 847: 2012 (2nd Ed) | 2012 | Guidelines for emissions discharged to the air by cement factories |
| Revised | Lists the commonly encountered pollutants in cement factories. It gives reasons behind these emissions and gives possible options of mitigation. | |
| ICS: 13.040.40 | ||
| TZS 530: 1995 (1st Ed) | 1995 | Textiles – Test for colour fastness – Colour fastness to rubbing: Organic solvents |
| Specifies a method for determining the resistance of the colour of textiles of all kinds and in all forms, except loose fibre, to the combined action of rubbing and of organic solvents used in spot-cleaning, i.e. localized “spotting” carried out by hand. | ||
| ICS: 59.080.01 | ISO: 105-D02: 1987 | ||
| TZS 1660:2014(1st Ed) | 2014 | Polyurethane (PU) coated leather — Specification |
| Prescribes requirements, methods of sampling and test for polyurethane (PU) coated leather. | ||
| ICS: 59.080.40 | ||
| TZS 733: 2002 (1st Ed) | 2002 | Method of examination for Vibro cholerae in foodstuffs |
| Gives general method for detection of Vibro cholerae (01 and 0139) present in food products intended for human consumption. | ||
| ICS: 100.30 | ||
| TZS 668 Part 1 | 2001 | Raw materials and products |
| Consists of a list of equivalent English terms in use in the petroleum industry to indicate raw materials or petroleum products, together with corresponding definitions | ||
| ICS: 01.040.75 | ISO: 1998-1:1998 | ||
| TZS 1232: 2010 (1st Ed) | 2010 | Plastic monobloc chairs- specification |
| Sets out requirement for the evaluation and selection of plastic monobloc chairs for adults, but does not include chairs intended for bathroom use. It specifies minimum requirement for strength, durability and stability of the completed chair, but does not account for materials, design, construction or the process of manufacture. | ||
| ICS: 83.140.01 | ||
| TZS 527: 2015 2nd ed- EAS 139: 2014 | 1992 | Fortified wine — Specification |
| Rev | Specifies the requirements and methods of sampling and test for fortified wine. | |
| ICS: 67.160.10 | EAS: 139: 2014 | ||
| TZS 5: 1979 (1st Ed) | 1979 | Preferred numbers |
| Specifies the preferred numbers in the four principles series, R5, R10, R20, and R40 as well as additional R 80 series intended for special applications and gives information regarding their derivations together with definitions of the terms used | ||
| ICS: 17.020 | ||
| TZS 413: 1989(1st Ed) | 1989 | Textiles – Designation of yarns |
| Specifies two methods of indicating the composition of yarns, whether single, folded, cabled or multiple wound | ||
| ICS: 59.080.30 | ||
| TZS 1393: 2011 (1st Ed) ISO 2450: 2008 | 2011 | Cream – Determination of fat content by Gravimetric method |
| Specifies the reference method for the determination of the fat content of raw, processed and sour cream in which no appreciable separation or breakdown of fat, due to lipolysis, has occurred | ||
| ICS: 67.100.99 | ISO: 2450: 2008 | ||
| TZS 727 (Part 1): 2002 (1st Ed) | 2002 | Cement – Part 1- Composition, specifications and conformity criteria for common cements |
| Defines and gives the specifications of 27 distinct common cement products and their constituents | ||
| ICS: 91.100.10 | ||
| TZS 757: 2003 (1st Ed) | 2003 | Textiles – Knitted cotton fabrics – Specification |
| Specifies the requirements for knitted cotton fabric suitable for apparel purposes | ||
| ICS: 59.080.30 | ||
| TZS 1641:2013 | 2013 | Rubber hoses and hose assemblies for underground mining- Wire-reinforced hydraulic types for coal mining- Specification |
| Specifies requirements for six types of embedded-wire hose and hose assembly of bore diameter from 5 mm to 51 mm for use with common hydraulic fluids such as mineral oils, soluble oils, oil and water emulsions, aqueous glycol solution and water at temperatures ranging from -40oC to +100 o C for types 1 to 5 and from -40o C to +121 o C for type 6. | ||
| ICS: 83.140.40 | ISO: 6805:1994 | ||
| TZS 987: 2009 (1st Ed) | 2009 | Fertilizer – Rock phosphate powder – Specification |
| Prescribes the requirements, methods of sampling and test for rock phosphate fertilizers in powder form of biogenic sedimentary origin. | ||
| ICS: 65.080 | ||
| TZS 464: 2009 (2nd Ed) | 2009 | Rubber test mixes – Preparation, mixing and vulcanization – Equipment and procedures |
| Revised | Specifies the equipment and procedures for the preparation, mixing and vulcanization of rubber text mixes. | |
| ICS: 83.060 | ||
| TZS 1484: 2012 (1st Ed)2 | 2012 | Milk based infant formula – Determination of vitamin A content by liquid chromatographic method |
| Prescribes the method for the determination of Vitamin A content in milk based infant formula. The method is applicable to milk based infant formula containing more than 500 IU vitamin A per reconstituted quart (quart is equal to 1.14 litres) | ||
| ICS: 67.020 | ||
| TZS 885: 2006 (1st Ed) | 2006 | Pulp paper and board – Microbiological examination – Part 1: Total count of bacteria, yeast and mould based on disintegration |
| Specifies a method for determining the total number of colony-forming units of bacteria, yeast and mould in dry market pulp, paper and paperboard after disintegration. The enumeration relates to a specific media. | ||
| ICS: 85.040 | ISO: 8784 (Part 1):2005 | ||
| TZS 658: 2004 (1st Ed) | 2004 | Test sieves – Metal wire cloth, perforated metal plate and electroformed sheet – Nominal sizes of openings |
| Specifies the nominal sizes of openings for metal wire cloth, perforated metal plate and electroformed sheet as sieving media in test sieves | ||
| ICS: 19.120 | ISO: ISO 565: 1990 | ||
| TZS 1518 (Part 8):2016 | 2016 | Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V — Part 8: Single core, flat twin and 3-core sheathed cables for fixed wiring |
| Specifies requirements and test methods for the constructions and performance of polyvinyl chloride (PVC) insulation of rated voltage 300/500 V intended for internal wiring, electric power and lighting. | ||
| ICS: 29.060.20 | ||
| TZS 1680: 2014 (1st Ed) | 2014 | Fortified sugar — Specification |
| Specifies the requirements and methods of sampling and test for fortified brown sugars and fortified plantation (mill) white sugar intended for direct human consumption | ||
| ICS: 67.180.10 | EAS: 770:2013 | ||
| TZS 15: 2009 (2nd Ed) | 2009 | Steel – Determination of phosphorus by alkali metric method |
| Rev | Describes method for the determination of phosphorus in plain carbon steel and alloy steels (containing neither titanium nor zirconium). | |
| ICS: 71.040.40 | ||
| TZS 1518 (Part 5): 2012(1st Ed) | 2012 | Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V Part 5: Flexible cables (Cords) |
| Specifies particular specifications for polyvinyl chloride insulated flexible cables (cords) of rated voltages up to and include 300/500 V. | ||
| ICS: 29.060.20 | EAS: 499-5:2008 | ||
| TZS 425: 1989 (1st Ed) | 1989 | Wet leather and pelts – Determination of moisture |
| Prescribes a procedure for the rapid determination of moisture in wet leather and pelts | ||
| ICS: 59.140.20 | ||
| TZS 1429: 2012 | 2011 | Paratha (chapatti) dough – Specification |
| Prescribes essential requirements for uncooked Paratha dough intended for making flat unleavened product. The standard applies to kneaded flattened pliable flour discs, prepared from wheat flour milled from Triticum aestivum L or club wheat, Triticum compactum (Host) or a mixture thereof | ||
| ICS: 67.060 | ||
| TZS 901 (Part 2): 2006 | 2006 | Information and documentation – Records management – Part 2 – Guidelines |
| It gives an overview of the processes and factors to consider in organizations wishing to comply with TZS 901 (Part 1): 2006. It is for use by record management professionals and those charged with managing records in their organizations. | ||
| ICS: 01.140.20 | ISO: 15489 (Part 2): 2001 | ||
| TZS 222: 1984 (1st Ed) | 1984 | Soap – Soft – Specification |
| Prescribes the requirements and methods of sampling and test for soft soap | ||
| ICS: 71.100.70 | ||
| TZS 893: 2006 (1st Ed) | 2006 | Fertilizers – Mono-ammonium phosphate and di-ammonium phosphate (MAP & DAP) – Specification |
| Prescribes requirements and methods of sampling and tests for MAP & DAP fertilizer. | ||
| ICS: 65.080 | ||
| TZS 715: 2015- EAS 229: 2001 | 2015 | Crepe bandages — Specification |
| New | Specifies requirements for crepe bandages used for surgical dressings | |
| ICS: 59.080.030 | EAS: 229:2001 | ||
| TZS 1259:2010 (1st Ed) | 2010 | Water quality- Determination of hydrocarbon oil index- Part 2: method using solvent extraction and gas chromatography. |
| Specifies a method for the determination of the hydrocarbon oil index in waters by means of gas chromatography. The method is suitable for surface water, waste water and water from sewage treatment plants and allows the determination of a hydrocarbon oil index in concentrations above 0. 1 mg/l. | ||
| ICS: 13.060.50 | ISO: 9377-2:2000 | ||
| TZS 1618:2014(1st Ed) | 2014 | Textile- Disposable adult diapers- Specification |
| Specifies the requirements for disposable adult diapers. | ||
| ICS: 59.080.30 | ||
| TZS 1567-2: 2013 (1st Ed) | 2013 | Determination of vitamins in flours – Part 2: Determination of Vitamin A content in flours by high performance liquid chromatography method |
| Prescribes a reference method for determination of vitamin A content in flours by High Performance Liquid Chromatography (HPLC) | ||
| ICS: 67.050 | ||
| TZS 744 (Part 1): 2013 (2nd Ed) | 2013 | Paper sacks |
| Rev | Provides a checklist for the characteristics of paper sacks to be specified when ordering. The ordering specifications cover the description of the sack and do not deal with quantitative performance requirements | |
| ICS: 55.080 | ISO: 8351 (Part 1): 1994 | ||
| TZS 167: 1983 (1st Ed) | 1983 | Textiles – Method for determination of colour fastness to washing |
| Prescribes the method to determine the effect on the colour fastness of textiles washing procedure at 60oC | ||
| ICS: 59.080.10 | ||
| TZS 42: 1979 (1st Ed) | 1979 | Textiles – Tests for colour fastness: Assessing staining |
| Prescribes a method for evaluating by means of Geometric staining scale staining of undyed fabrics during colour fastness tests. | ||
| ICS: 59.080.01 | ||
| TZS 1485: 2012 (1st Ed) | 2011 | Infant formula – Determination of mineral content by atomic absorption spectrophotometric method |
| for the determination of mineral content in infant formula. The method is used in the determination of mineral content like calcium, magnesium, iron, zinc, copper, manganese, sodium, and potassium. It is also applicable in determining mineral content in enteral products and pet food. | ||
| ICS: 67.020 | ||
| TZS 841 Part 8: 2004 (1st Ed) | 2004 | Requirements for silver table and decorative hollowware |
| Specifies materials, performance and marking requirements for silver table and decorative hollowware intended for use at or upon the dining table. | ||
| ICS: 67.250 | ISO: 8442-8:2000 | ||
| TZS 1640:2013 | 2013 | Plastics hoses and hose assemblies- Textile- reinforced types for hydraulic applications- Specification |
| Specifies requirements for three types of textile- reinforced thermoplastics hose and hose assembly of nominal size from 3, 2 to 25. | ||
| ICS: 83.140.40 | ISO: 3949:2009 | ||
| TZS 1742: 2015- ISO 21067: 2007 | 2015 | Packaging — Vocabulary |
| New | Specifies preferred terms and definitions related to packaging and materials handling, for use in international commerce. | |
| ICS: 01.040.55 | ISO: 21067: 2007 | ||
| TZS 1093-2:2009 (1st Ed) | 2009 | Ceramic tiles - Part 2: Determination of dimensions and surface quality |
| Specifies methods for determining the dimensional characteristics (length, width, thickness, straightness of sides, rectangularity and surface flatness) and the surface quality of ceramic tiles. | ||
| ICS: 91.100.20 | ISO: 10545-2: 1995 | ||
| T TZS 492: 1992 (1st Ed) | 1992 | Textiles – Sisal ropes – Specification |
| Prescribes the requirements of sisal ropes. | ||
| ICS: 59.080.50 | ||
| TZS 432-3: 2015- | 2015 | Plastics piping systems for the supply of gaseous fuels – Polyethylene (PE) — Part 3: Fittings |
| New | Specifies the characteristics of pipes made from polyethylene (PE) for piping systems in the field of the supply of gaseous fuels. | |
| ICS: 75.200 | ISO: 4437-3:2014 | ||
| TZS 848: 2005 (1st Ed) | 2005 | Building lime – Methods of taking and preparing samples |
| Describes the equipment to be used, the methods to be followed and the provisions to comply with, in taking samples of building lime representative of given lots for testing to assess the equality of products prior to, during or after delivery. | ||
| ICS: 91.100.10 | ||
| TZS 83: 1980 (1st Ed) | 1980 | Paper – Methods for sampling and test for moisture content |
| Prescribes methods for the determination of moisture content of paper at the time of sampling | ||
| ICS: 85.060 | ||
| TZS 353: 2014 (3rd Ed) | 2014 | Galvanized corrugated iron sheets – Specification |
| Revised | Specifies the materials, profiles and dimensions of hot-dip zinc coated corrugated steel sheets. | |
| ICS: 77.140. 01 | ||
| TZS 1393: 2011 (1st Ed) ISO 2450: 2008 | 2011 | Cream – Determination of fat content by Gravimetric method |
| Specifies the reference method for the determination of the fat content of raw, processed and sour cream in which no appreciable separation or breakdown of fat, due to lipolysis, has occurred | ||
| ICS: 67.100.99 | ISO: 2450: 2008 | ||
| TZS 951: 2007 (1st Ed) | 2007 | Microbiology of food and animal feeding stuffs – Horizontal methods for sampling techniques from surfaces using contact plates and swabs |
| Specifies horizontal methods for sampling techniques using contact plates or swabs on surfaces in the food industry environment, and food processing plants with a view of detecting or enumerating viable microorganisms. | ||
| ICS: 07.100.30 | ISO: 18593: 2004 | ||
| TZS 634 | 2002 | Rubber condoms – Testing for holes water leak test |
| Withdrawn | ||
| TZS 265 (Part 1): 1985 (1st Ed) | 1985 | Textiles – Methods of testing the strength of yarns from packages – Part 1: Determination of breaking strength and extension |
| Prescribes methods for the determination of the breaking strength and breaking extension of yarns from packages by means of constant-rate-of-loading machines, constant-rate-of-extension machines, and machines with constant-rate-of-traverse of driven clamp. | ||
| ICS: 59.080.20 | ||
| TZS 972: 2007 (1st Ed) | 2007 | Soil quality – Limits for soil contaminants in habitat and agriculture |
| Set limits for soil contaminants in agriculture and habitat. | ||
| ICS: 13.080.99 | ||
| TZS 1320:2010 (1st Ed) ISO 6571:2008 | 2010 | Spice, condiments and herbs - Determination of volatile oil content (hydrodistillation method) |
| Specifies a method for the determination of the volatile oil content of spices, condiments and herbs. | ||
| ICS: 67.200.10 | ISO: 6571:2008 | ||
| TZS 1537:2012 (1st Ed) | 2012 | Rubber, unvulcanized - Determinations using a shearing - disc viscometer Part 1: Determination of mooney viscosity |
| Specifies a method, using a shearing -disc viscometer, for measuring the Mooney viscosity of uncompounded or compounded rubbers. | ||
| ICS: 83.060 | ISO: 289-1:2005 | ||
| TZS 264: 1985 (1st Ed) | 1985 | Textile – Designation of the direction of twist in yarns and related products |
| Specifies a method of twist in textile yarns and is applicable to yarn intermediates such as slivers, slubbing, or rovings; to single yarns, plied yarns, cabled yarns; and to threads, twine, cordage and rope | ||
| ICS: 59.080.20 | ||
| TZS 1187 (Part 12): 2010 (1st Ed) | 2010 | Road vehicles- Compressed Natural Gas (CNG) fuel system components Part 12: Pressure relief valve (PRV) |
| Specifies test and requirement for the pressure relieve valve (PRV), a compressed natural gas fuel system component intended for use on all types of motor vehicles. | ||
| ICS: 43.060.40 | ISO: 15500-12: 2000 | ||
| TZS 1298: 2010 (1st Ed) | 2010 | Sharps container - specification |
| Specifies requirements for sharps containers intended to hold potentially infectious medical waste comprised largely of devices which can readily cause physical injury, e. g scalpels, blades, hypodermic needles and syringes. | ||
| ICS: 11.140 | ||
| TZS 537: 2015 (1st Ed) | 2015 | Quick frozen prawns and shrimps — Specification |
| Rev | Prescribes the requirements and methods of sampling and test for quick frozen raw prawns and shrimps for human consumption. It does not apply to specialty products where prawns or shrimps only constitute a portion of the edible contents | |
| ICS: 67.120.30 | ||
| TZS 971: 2007 (1st Ed) | 2007 | Photovoltaic system performance monitoring – Guidelines for measurement, data exchange and analysis |
| Recommends procedures for the monitoring of energy-related PV systems characteristics such as inplane irradiance, array output, storage input and output and power conditioner input and output; and for the exchange and analysis of monitored data. | ||
| ICS: 27.160 | EAS: 368: 2005 | ||
| TZS 1533: 2012 | 2012 | Quality management system - Guidelines for quality plans |
| Provide guidelines for the development, review, acceptance, application and revision of quality plans. It is applicable whether or not the organization has a management system in conformity with ISO 9001. | ||
| ICS: 03.120.10 | ISO: 10005:2005 | ||
| TZS 241(Part 3): 2006 (2nd ed) | 2006 | Metallic materials- Rockwell hardness test- part 3: Calibration of reference blocks (scales A, B, C, D, E, F, G, H, K, N, T) |
| Revised | Specifies the method for the calibration of reference blocks to be used for the indirect verification of Rockwell hardness testing machines (scales A, B, C, D, E, F, G, H, K, N, T) as specified in TZS 241(Part 2). | |
| ICS: 77.040.10 | ISO: 6508-3: 2005 | ||
| TZS 1496: 2012 (1st Ed) EAS 41-10: 2000 | 2012 | Fruits, vegetables and derived products – Sampling and methods of test – Part 10: Determination of soluble solids |
| Specifies a refractometric method for the determination of the soluble solids in fruit and vegetable products. | ||
| ICS: 67.080.01 | EAS: 41-10: 2000 | ||
| TZS 1163: 2015- ISO 1576: 1988 (1st ed) | 2015 | Tea — Determination of water-soluble ash and water-insoluble ash |
| New | Specifies a method for the determination of the water-soluble ash and the water-insoluble ashof tea. | |
| ICS: 67.140.10 | ISO: 1576: 1988 | ||
| TZS 444: 2015- ISO 941: 1980 | 2015 | Spices and condiments — Determination of cold water-soluble extract |
| New | Specifies a method for the determination of cold water-soluble extract in spices and condiments. | |
| | ISO: 941:1980 | ||
| TZS 175:2009 (2nd Ed) | 2009 | Hexagon nuts, style 2 – Product grade A & B |
| Rev | Gives specifications for hexagon nuts, style 2 (property classes 10 and 12), with metric dimensions and thread diameters from 5 up to and including 36 | |
| ICS: 21.060.30 | ISO: 4033: 1979 | ||
| TZS 137: 1981 (1st Ed) | 1981 | Textiles – Determination of dimensional change of woven, knitted fabrics and garments – Machine method |
| Describe a method for determining the dimensional change of woven, knitted fabrics and garments made from natural and man made fibers. It also specifies methods for the preparation, making and measuring of fabric specimens and garments for use in tests for determining dimensional changes. | ||
| ICS: 59.080.30 | ISO: 675: 1979 | ||
| TZS 593: 1999 (1st Ed) | 1999 | Sensory analysis – Methodology – Method of investigating sensitivity of taste |
| Describes a set of objective tests for familiarizing assessors with sensory analysis. | ||
| ICS: 67.240 | ISO: 3972: 1991 | ||
| TZS 795: 2007 (1st Ed) | 2007 | Corrugated glossy compound roofing materials – Specification and test methods |
| Specifies requirements for composition, manufacture and mechanical strength, physical and fire resistance properties of corrugated glossy compound roofing materials | ||
| ICS: 91.100.20 | ||
| TZS 1278: 2012 (1st Ed) | 2012 | Fresh potato tuber (ware potato tuber) - specification |
| Specifies the requirement for ware potato tuber of varieties (cultivars) grown from (Solanumtuberosum) and its hybrids to be supplied fresh and either packaged or loose for human consumption. It does not cover the requirement for potato tubers intended for industrial processing or as seed potato tuber. | ||
| ICS: 67.080.2 | EAS: 748: 2010 | ||
| TZS 185: 1983 (1st Ed) | 1983 | Milk and milk products – Microbiological – Specification |
| Prescribes microbiological specifications for liquid, condensed and dried milk, cheese, ice cream and butter | ||
| ICS: 07.100.30 | ||
| TZS 719: 2015- EAS 253-1: 2001 | 2015 | Code of practice for grading of textile materials — Part 1: Fabrics |
| New | Specifies requirements for grading of textile fabrics. | |
| ICS: 61.020 | EAS: 253-1:2001 | ||
| TZS 1163: 2015- ISO 1576: 1988 (1st ed) | 2015 | Tea — Determination of water-soluble ash and water-insoluble ash |
| New | Specifies a method for the determination of the water-soluble ash and the water-insoluble ashof tea. | |
| ICS: 67.140.10 | ISO: 1576: 1988 | ||
| TZS 480: 2009 (2nd Ed) | 2009 | Coffee and coffee products- determination of the caffeine content using High Performance Liquid Chromatography (HPLC)- Reference method |
| Revised | Specifies a high performance liquid chromatography (HPLC) method for the determination of the coffee content of green coffee, roasted coffee, soluble coffee, regular and decaffeinated and mixed instant coffee products (e. g coffee/ chicory mix) | |
| ICS: 67.140 | ISO: 20481:2008 | ||
| TZS 301: 1987 (1st Ed) | 1987 | Pesticides manual |
| Prescribes permissible agricultural pesticides, their technical characteristics and general requirements for safe handling of the products as certified by Tropical Pesticides Research Institute (TPRI). | ||
| ICS: 65.100.01 | ||
| TZS 585: 2011 (2nd Ed) | 2011 | Ready to drink non-carbonated non-alcoholic beverage – Specification |
| Revised | Specifies requirements and methods of test for ready to drink non-alcoholic and non-carbonated beverages intended for direct human consumption | |
| ICS: 67.160.30 | ||
| TZS 1588:2013 | 2013 | Societal security –Emergency management- Requirements for incident response |
| Specifies minimum requirements for effective incident response and provide the basics for command and control, operational information, coordination and cooperation within an incident response organizations. It includes command and control organization structures and procedures, decision support, traceability, information management and interoperability. | ||
| ICS: 03.100.01 | ISO: 22320:2011 | ||
| TZS 1690:2014(1st Ed) | 2014 | Holomo cheese — Specification |
| Specifies requirements, methods of test and sampling for holomo cheese intended for direct consumption or for further processing. | ||
| ICS: 67.100.30 | ||
| TZS 847: 2012 (2nd Ed) | 2012 | Guidelines for emissions discharged to the air by cement factories |
| Revised | Lists the commonly encountered pollutants in cement factories. It gives reasons behind these emissions and gives possible options of mitigation. | |
| ICS: 13.040.40 | ||
| O&M 5 | Special | Methodological document for processing of draft Tanzania Standards for approval by Executive Council |
| Gives procedure for processing of draft Tanzania Standards for approval by the Executive Council with a view to reducing the overall time required for formal consideration of draft Tanzania Standards during the meetings of the Executive Council. | ||
| TZS 67:2009 (2nd ed) | 2009 | Correspondence envelopes – Designation and sizes |
| Revision | Specifies the designations and the sizes of correspondence envelopes intended for postal purposes. | |
| ICS: 55.O80. | ISO: 269:1985 | ||
| TZS 970: 2007 (1st Ed) | 2007 | Crystalline silicon photovoltaic array-on-site measurement of l-V characteristics |
| Describes procedures for on-site measurement of crystalline silicon photovoltaic (PV) array characteristics and for extrapolating these data to standard. | ||
| ICS: 27. 160 | EAS: 369: 2005 | ||
| TZS 1332:2010 (1st Ed) ISO 3596: 2000 | 2010 | Animal and vegetable fat and oils – Determination of unsaponifiable mater – Method using diethyl ether extraction |
| Specifies a method using diethyl ether extraction for the determination of the unsaponifiable matter content of animal and vegetable fats and oils. | ||
| ICS: 67.200.10 | ISO: 3596:2000 | ||
| TZS 76:2010 (2nd ed) | 2010 | General method for determination of arsenic silver diethyldithiocarmate photometric method |
| Revision | Specifies a general method for photometric determination of arsenic, using diethyldothiocarbamate. It is applicable to the determination of quantities of arsenic (As), contained either in all the test solution or in the aliquot portion taken for the determination, of between 1 and 20 µg. | |
| ICS: 71.040.40 | ISO: 2590:1973 | ||
| TZS 790 | Hand pumps | |
| TZS 1008: 2015- EAS 145: 2014 | 2015 | Gin — Specification |
| New | Specifies the requirements and methods of sampling and test for gin. | |
| ICS: 67.160.10 | EAS: 145:2014 | ||
| TZS 2: 1984 (1st Ed) | 1984 | Chama cha Mapinduzi flag – Specification |
| Gives in detail the requirements on design, construction, and sizes of Chama Cha Mapinduzi flag of Tanzania, made of mill spun and loom woven cotton bunting | ||
| ICS: 59.080.30 | ||
| TZS 1430: 2011 (1st Ed) | 2011 | Tea Masala - Specification |
| Prescribes the requirements and the methods of sampling and test for tea masala which is used as a flavouring material in the preparation of tea. | ||
| ICS: 67.220.10 | ||
| TZS 962: 2007 (1st Ed) | 2007 | Native starch – Determination of starch content – Ewers polarimetric method |
| Specifies a polarimetric method for the determination of the starch content of native starch, with the exception of starch with high amylose content. | ||
| ICS: 67.040 | ISO: 10520: 1997 | ||
| TZS 748-2: 2009 | 2009 | Paper and board – Determination of tensile properties – Part 2: Constant rate of elongation method |
| Specifies a method of measuring the tensile strength, stretch at break and tensile energy absorption of paper and board using a test instrument operating at a constant rate of elongation. It also specifies methods for calculating the tensile index, the tensile energy absorption index and the modulus of elasticity. | ||
| ICS: 85.060 | ISO: 1924-2:1994 | ||
| TZS 1541: 2012 | 2012 | Rubber, raw natural and raw synthetic- Sampling and further preparative procedures |
| Specifies a method for the sampling of raw rubber in bales, blocks or packages and further procedures carried out on the samples to prepare test samples for chemical and physical tests. | ||
| ICS: 83.040.10 | ISO: 1795:2007 | ||
| TZS 297 | 1989 | Building drawings – Representation of areas, sections and views – General principles |
| Establishes general rules for representation of areas, sections and views on buildings and civil engineering drawings | ||
| ICS: 01.100.30 | ISO: 4069:1977 | ||
| TZS 1454:2011 (1st Ed) ISO 10012:2003 | 2011 | Measurement management systems - Requirements for measurement processes and measuring equipment |
| Specifies generic requirements and provides guidance for the management of measurement processes and metrological confirmation of measuring equipment used to support and demonstrate compliance with metrological requirements. It specifies the quality management requirements of a measurement management system that can be used by an organization performing measurements as part of the overall management system, and to ensure metrological requirements are met. | ||
| ICS: 03.120.10; 17.020 | ISO: 10012:2003 | ||
| TZS 218: 1984 (1st Ed | 1984 | Gaseous nitrogen (technical grade) – Specification |
| Prescribes the requirement and methods of sampling and test for gaseous nitrogen (technical grade). | ||
| ICS: : 71.060.01 | ||
| TZS 15:2009 (1st Ed) | 2009 | Steel- Determination of phosphorus by alkalimetric method |
| Rev | Describes method for the determination of phosphorus in plan carbon stell and alloy steels (containing neigher titanium nor zirconium) | |
| ICS: 71.040.40 | ||
| TZS 497 | 1999 | Determination of silica content in sodium hydroxide |
| Outlines the method of determination of silica content in sodium hydroxide for industrial use | ||
| ICS: 71.060.50 | ||
| TZS 1536: 2012 (1st Ed) | 2012 | Spices and condiments - Cumin specification |
| Prescribes the requirements and methods of sampling and test for fruitsof cumin (CuminumcyminumL) | ||
| TZS 584: 2003 (1st Ed) | 2003 | Wafers – Specification |
| Prescribes requirements and methods of sampling and test for wafers. | ||
| ICS: 67.230 | ||
| TZS 1530: 2012 (1st Ed) | Rubber - Determination of ash | |
| Specifies two methods for the determination of ash from raw rubbers, compounded rubbers and vulcanizates. The methods are applicable to raw, compounded or vulcanized rubbers of the M, N, O, R and U families described in ISO 1629 | ||
| ICS: 83.060 | ISO: 247: 2006 | ||
| TZS 274 Part 3:2006 (2nd ed) | 2006 | Metallic materials – Vickers hardness test – Part 3: Calibration of reference blocks |
| Revision | Specifies a method for the calibration of reference blocks to be used for the indirect verification of Vickers hardness testing machines. | |
| ICS: 77.040 | ISO: 6507-3:2005 | ||
| TZS 973: 2008 (1st Ed) | 2008 | Soil quality – Gas chromatographic determination of the content of volatile aromatic hydrocarbons, naphthalene and volatile halogenated hydrocarbons – Purge-and-trap method with thermal desorption ethod with thermal desorption |
| Specifies a method for quantitative gas-chromatographic determination of volatile hydrocarbons, naphthalene and volatile halogenated hydrocarbons in soil. | ||
| ICS: 13.080.99 | ISO: 15009: 2002 | ||
| TZS 667: 2014 (2nd Ed) | 2014 | Motor vehicles brake fluids — Specification |
| Rev | Specifies the characteristics, methods of test and packing of automotive brake fluids of the non-petroleum type and silicone type for use in the hydraulic braking systems and clutches of motor vehicles. | |
| ICS: 75.20 | ||
| TZS 1394: 2011 (1st Ed) ISO 5544: 2008 | 2011 | Caseins -Determination of “fixed ash” |
| Specifies a reference method for the determination of the “fixed ash” of caseins, as a percentage by mass, obtained by acid precipitation or lactic fermentation, of ammonium caseinates, of their mixtures with rennet casein and with caseinates, and of caseins of unknown type. | ||
| ICS: 67.100.99 | ISO: 5544: 2008 | ||
| TZS 1134: 2010 (1st Ed) | 2010 | Hair oil- specification |
| Prescribes the requirement for hair oils and other oil- based cosmetic preparation sold the hair like tonics and hair oil concentrates. | ||
| ICS: 71.100.70 | ||
| TZS 306:2009(2nd Ed) | 2009 | Dairy ices and dairy ice creams – Specification |
| Rev | Specifies the requirements and sampling and methods of test for dairy ices and dairy ice cream | |
| ICS: 67.100.10 | EAS: 70:2007 | ||
| TZS 1149: 2010 | 2010 | Green and roasted coffee- Determination of free-flow bulk density of whole beans (Routine method) |
| Specifies a method for the determination of the bulk density of whole green or roasted coffee beans under free-flow conditions from one container to another. | ||
| ICS: 67.140.20 | ISO: 6669:1995 | ||
| TZS 1585:2013(1st Ed) | 2013 | Specification for road humps and rumbles strips |
| Specifies the requirements for design and construction of road humps and rumble strips, intended for use in speed control on paved roads and highways. | ||
| ICS: 93.080.20 | ||
| TZS 655: 2001 | 2001 | Timber – Method of testing connector joints |
| Specifies the method of evaluating the strength and rigidity of timber joints fastened with metal connectors, which also require bolts to form the joint. | ||
| ICS: 79.020 | ||
| TZS 802: 2004 (1st Ed) | 2004 | Quaternary ammonium compound disinfectant – Specification |
| Covers formulations based on quaternary ammonium compounds in liquid or powder form for disinfecting inanimate spaces. It is intended primarily for destruction of pathogens on floors, walls and other hard surfaces. | ||
| ICS: 11.080.20 | ||
| TZS 1443: 2011 ISO 8213:1986 | 2011 | Chemical Products for Industrial use-Sampling techniques-Solid chemical products in the form of particles varying from powders to coarse lumps |
| Describes the general techniques of taking and preparing samples with a view to the assessment of a solid chemical product lot, for use in conjunction with a previously established sampling plan. Is applicable to solid chemical products, in particulate form, ranging from powders to coarse lumps with a maximum size of 100mm, and consigned in containers (of for example 25, 50 or 100kg) or in bulk | ||
| ICS: 71.100.01 | ISO: 8213:1986 | ||
| TZS 220:2014 (2nd ed) | 2014 | Liquid soap — Specification |
| Revision | Specifies requirements and methods of sampling and test for liquid soap for general purposes. It does not cover shampoos and products intended for specific purposes, such as those for industrial and surgical uses. | |
| ICS: 71.100.40 | EAS: 790:2013 | ||
| TZS 1419 (Part 2): 2011 (1st Ed) | 2011 | Furniture — Chairs and tables for educational institutions – Part 2: Safety requirements and test methods |
| Specifies safety requirements and test methods for plastic chairs and tables for general educational purposes in educational institutions. It does not apply to computer related and special purpose workstations, e.g. offices, laboratories, ranked seating, workshops, and spaces for design and technology | ||
| ICS: 97.140 | ||
| TZS 1514: 2012 (1st Ed) | 2012 | Food products – Determination of melamine in liquid and powder milk by HPLC-UV Method |
| Prescribes procedures for the extraction and determination of Melamine in liquid (fresh milk, UHT milk and condensed milk) and powder milk by HPLC-UV Method. | ||
| ICS: 67.050 | ||
| TZS 375: 1988 (1st Ed) | 1988 | Classification for degrees of protection provided by enclosures for rotating electrical machines |
| Classifies the degrees of protection provided by enclosures for rotating electrical machines. It also defines the requirements with which protective enclosure shall comply | ||
| ICS: 29.160.01 | ||
| TZS 986: 2009 (1st Ed) | 2009 | Instruments for measuring vehicle exhaust emissions – Metrological and technical requirements; Metrological control and performance tests |
| Specifies the metrological and technical requirements and tests for measuring instruments that serve to determine the volume fractions of certain components of the exhaust gases emanating from motor vehicles. | ||
| ICS: 43.040.99 | ISO: 3930: 2000 | ||
| TZS 774: 2014 (2nd Ed) | 2014 | Labeling of cosmetic products – General requirements |
| Rev | Specifies requirements for the labelling of cosmetic products | |
| ICS: 71.100.70 | ||
| TZS 147: 2009 (2nd Ed) | 2009 | Steel pipes – Hot – Dip zinc coating – Specification |
| Rev | Covers the requirements for zinc coating applied by hot - dip galvanizing on steel tubes covered in TZS 152 | |
| ICS: 77.140.75 | ||
| TZS 817: 2004 (1st Ed) | 2004 | Packaging – Glass beer bottles- Specification |
| Specifies the design and dimensions, neck finish, capacity, internal pressure resistance, verticality, thermal shock resistance and markings for amber glass bottles for beer of 520ml brimful capacity intended for multi-trip use. | ||
| ICS: 55.100.00 | ||
| TZS 1060: 2008 | 2008 | Continuous hot-dip aluminum/zinc-coated steel sheet of commercial, drawing and structural qualities |
| Specifies the characteristics of steel of commercial, drawing and structural qualities coated by a continuous hot-dip aluminum/zinc alloy coating process. | ||
| ICS: 77.140.15 | ISO: 9364:2001 | ||
| TZS 265 (Part 1): 1985 (1st Ed) | 1985 | Textiles – Methods of testing the strength of yarns from packages – Part 1: Determination of breaking strength and extension |
| Prescribes methods for the determination of the breaking strength and breaking extension of yarns from packages by means of constant-rate-of-loading machines, constant-rate-of-extension machines, and machines with constant-rate-of-traverse of driven clamp. | ||
| ICS: 59.080.20 | ||
| TZS 1099: 2012 (1st Ed) | 2012 | Automotive biodiesel fuel- Specification |
| Specifies requirements and test methods for pure biodiesel (B100) used as automotive diesel fuel for diesel engines at 100% concentration. | ||
| ICS: 75.160.20 | ||
| TZS 657: 2011 (1st Ed) | 2011 | Glossary of terms used in timber industry |
| Covers definition of terms used in the timber industry | ||
| ICS: 01.040.79 | ||
| TZS 135: 1983 | 1983 | Hard boiled sugar confectionery – Specification |
| Covers the requirements and specifications for hard -boiled sugar confectionery | ||
| ICS: 67.180.10 | ||
| TZS 1650:2014(1st Ed) | 2014 | Instant hand sanitizers — Specification |
| Specifies the requirements and methods of test for alcohol based instant hand sanitizers. The standard does not cover non-alcohol based hand sanitizers. | ||
| ICS: 77.100.40 | EAS: 789:2013 | ||
| TZS 1490: 2012 (1st Ed) EAS 41-4: 2000 | 2012 | Fruits, vegetables and derived products – Sampling and method of test – Part 4: Determination of mineral impurities content |
| Specifies a method for the determination of the mineral impurities content (impurities generally originating from the soil) of fruit and vegetable products. | ||
| ICS: 67.080.01 | EAS: 41-4: 2000 | ||
| TZS 1685:2014(1st Ed) EAS 134:2013 | 2014 | Cold rolled steel section-Specification |
| Specifies the dimensions and sectional properties of cold rolled steel sections of thickness up to 8 mm for use in structural applications. The section are listed in Tables 4 to 12 | ||
| ICS: 77.140.01 | EAS: 134:2013 | ||
| TZS 1093-1:2009 (1st Ed) | 2009 | Ceramic tiles-Part 1: Sampling and basis for acceptance |
| Specifies rules for batching, sampling, inspection and acceptance/rejection of ceramic tiles | ||
| ICS: 91.100.20 | ISO: 10545-1:1995 | ||
| TZS 760 Part 21: 2004 (1st Ed) | Method of testing cement – Part 21 – Determination of the chloride, carbon dioxide and alkali content of cement | |
| Lays down the methods for the determination of the chloride, carbon dioxide and alkali content of cement. The standard describes methods and, in certain cases, an alternative method which can be considered as giving equivalent results. If other methods are used, their results shall be shown to be equivalent to the results given by the reference methods | ||
| ICS: 91.100.10 | ||
| TZS 521 Part 1 | 1992 | General definitions and test requirements |
| Defines general terms and requirements regarding test objects and test procedures. | ||
| ICS: 29.020.00 | ||
| TZS 1325: 2010 (1st Ed) ISO 3657: 2002 | 2010 | Animal and Vegetable fats and oils - Determination of specification value |
| Specifies a method for the determination of the saponification value of animal and | ||
| vegetable fats and oils. The saponification value is a measure of the free and esterified acids present in fats and fatty acids. | ||
| ICS: 67.200.10 | ISO: 3657:2002 | ||
| TZS 714: 2015- ISO 6839: 1982 | 2015 | Anionic surface active agents — Determination of solubility in water |
| New | Specifies a method of establishing the curve representing the solubility of an anionic surface active agent in water as a function of temperature and consequently of allowing evaluation of its solubility at a given temperature | |
| ICS: 71.100.40 | ISO: 6839:1982 | ||
| TZS 131: 2010 (2nd Ed) | 2010 | Microbiology of food and animal feeding stuff: General guidance for enumeration of yeasts and moulds- Colony Count technique at 25oC |
| Rev | General guidance for enumerative of yeasts and moulds- Colony Count Technique at 25oC It gives general guidance for the enumeration of viable yeasts and moulds in products intended for human consumption or animal feeding stuffs by means of colony count at 25oC | |
| ICS: 07.100.30 | ISO: ISO 7954:1987 | ||
| TZS 1304: 2011 (1st Ed0 ISO 6309: 1987 | 2011 | Fire protection - Safety signs |
| Specifies safety signs for use in the field of fire protection and fire-fighting. | ||
| ICS: 13.220.20 | ISO: 6309: 1987 | ||
| TZS 1659:2014(1st Ed) | 2014 | Textiles — Reusable sanitary towels — Specification |
| Prescribes the requirements for reusable sanitary towels for external use | ||
| ICS: 59.080.30 | ||
| TZS 559: 2010 (2nd Ed) | 2010 | Palm Olein – Specification |
| Revised | Prescribes the requirements and methods of sampling and test for crude palm olein; neutralized/refined and bleached palm olein; neutralized/refined, bleached and deodorized palm olein which must have been obtained from a one stage fractionation process; including neutralized/refined, bleached and deodorized palm olein obtained from a one stage fractionation and finally in the process, refractionated and filtered (double fractionated). | |
| ICS: 67.200.10 | ||
| TZS 993 (Part 3): 2007 (1st Ed) | 2007 | Sterile hypodermic syringes for single use – Part 3 – Auto-disable syringes for fixed-dose immunization |
| Specifies the properties and performance of sterile single-use hypodermic syringes with or without needle, made of plastic materials and stainless steel and intended for the aspiration of vaccines or for the injection of vaccines immediately after filling. | ||
| ICS: 11.040.20 | ISO: 7886 (Part 3): 2005 | ||
| TZS 1419 (Part 1): 2011 (1st Ed) | 2011 | Furniture — Chairs and tables for educational institutions - Part 1: Functional dimensions. |
| Specifies functional dimensions and markings for chairs and tables for general educational purposes in educational institutions. It includes fixed height and adjustable furniture as well as standing work height tables for use without chairs. It applies to furniture for use with laptop computers or portable devices, but not to special purpose workstations, e.g. laboratories, ranked seating and workshops. | ||
| ICS: 97.140 | ||
| TZS 1525: 2012 (1st Ed) | 2012 | Environmental labels and declarations - Type I environmental labeling - Principle and procedure |
| Establishes the principles and procedures for developing Type I environmental labelling programmes, including the selection of product categories, product environmental criteria and product function characteristics; and for assessing and demonstrating compliance. This Standard also establishes the certification procedures for awarding the label. | ||
| ICS: 13.020.50 | ISO: 14024: 1999 | ||
| TZS 840: 2015 | 2015 | Skin powder — Specification |
| New | Prescribes the requirements, sampling and test method for skin powders. It does not cover skin powder for infants, for which a separate standard is applied to that product. | |
| ICS: 71.100.70 | ||
| TZS 129: 1981 (1st Ed) | 1981 | Meat and meat products – Microbiological examination – Sampling |
| Gives general instructions and specifies the procedures to be followed in taking primary samples from meat and meat products. | ||
| ICS: 07.100.30 | ||
| TZS 1539: 2012 | 2012 | Rubber, raw natural- Determination of dirt content |
| Specifies a method for the determination of the dirt content of raw natural rubber. It is not applicable to dirt present as surface contamination. | ||
| ICS: 83.040.10 | ISO: 249: 1995 | ||
| TZS 663:2012 (2nd Ed) | 2012 | Textiles – Cotton woven canvas materials – Specification |
| Revised | Describes the constructional details and other particulars of six types of cotton woven canvas materials meant for shoe uppers, normal canvas materials, luggage and mail bags, PVC coating or laminating materials, heavy duty canvas materials whether bleached, dyed, printed striped or checked | |
| ICS: 59.080.30 | ||
| TZS 186: 1983 (1st Ed) | 1983 | Fresh fish – Handling and processing – Code of hygiene |
| This code applies to handling and processing of fresh fish at large scale for commercial purpose. | ||
| ICS: 67.120.30 | ||
| TZS 1679: 2014- | 2014 | Hot-rolled, heavy-thickness carbon steel sheets, coils and strips — Specification |
| It specifies requirements for hot-rolled, heavy-thickness carbon steel sheets, coils and strips of commercial quality, drawing quality special killed, and structural quality. | ||
| ICS: 77.140.20 | EAS: 108: 2014 | ||
| TZS 407: 1989 (1st Ed) | 1989 | Tungsten filament lamps for general lighting service – Specification |
| Specifies requirements for the safety, interchangeability and performance of tungsten filament (incandescent) lamps for general lighting purposes | ||
| ICS: 29.140.30 | ||
| TZS 762: 2003 (1st Ed) | 2003 | Metallic materials – Calibration of force-proving instruments used for the verification of uniaxial testing machines |
| Covers the calibration of force-proving instruments used for the static verification of uniaxial testing machines (e.g. tension/compression testing machines) and describes a procedure for classifying these instruments. | ||
| ICS: 77.040.10 | ||
| TZS 598: (Part 3): 2010 (2nd Ed) | 2010 | Automotive engineering – Bus bodybuilding – Part 3: Code of practice for bus body building |
| Revised | Gives guidelines for body building. It specifies seat arrangement, required seat dimensions, external dimensions of buses and several aspects regarding safety. It specifies material used for windows and windscreen. It also specifies the classes of buses based on comfortability but does not give details of design in terms of construction or mechanical condition. | |
| ICS: 43.040.60 | ||
| TZS 516: 2009 (2nd Ed) | 2009 | Packaging – Complete, filled transport packages and unit loads – Vibration test at fixed low frequency |
| Revised | Specifies a method for carrying out vibration test on complete, filled transport packages of unit loads using sinusoidal excitation at fixed frequency | |
| ICS: 55.180.40 | ||
| TZS 34 (Part 3):1981 (1st Ed) | 1981 | Animal feeds and feeding stuffs – Part 3: Microbiological test methods |
| Prescribes the microbiological methods for testing animal feeds and feeding stuffs. | ||
| ICS: 07.100.30 | ||
| TZS 875: 2014 (2nd Ed) | 2014 | Dry beans — Specification |
| Revised | Specifies requirements and methods of sampling and test for dry common beans (Phaseolus vulgaris Linn.) intended for human consumption | |
| ICS: 67.060. | EAS: 46:2013 | ||
| TZS 1059: 2008 | 2008 | Continuous hot-dip zinc-coated carbon steel sheet of commercial and drawing qualities |
| Applies to carbon steel sheet of commercial and drawing qualities coated by the continuous hot-dip zinc-coating process. Zinc coated sheet is produced in thickness from 0.25 mm to 5mm inclusive after coating, and in widths of 600 mm and over coils and cut lengths. Zinc-coated sheet less than 600mm wide, slit from wide sheet, will be considered as sheet. | ||
| ICS: 77.140.50 | ISO: 3575:2005 | ||
| TZS 1474: 2012 (1st Ed) EAS 54:1999 | 2012 | Burnt building bricks – Specification |
| Specifies building bricks of burnt clay, shale or brick earth for use in buildings for decoratives, structural and non-structural purposes. It also specifies sampling and testing methods. | ||
| ICS: 91.100.10; | EAS: 54:1999 | ||
| TZS 272:2010 (2nd ed) | 2010 | Hardened vegetable fats – Specification |
| Revision | Prescribes the requirements and methods of sampling and test for hardened vegetable fats. | |
| ICS: 67.200.10 | ||
| TZS 1114: 2015 | 2015 | Road tank vehicles for the transportation of dangerous petroleum products |
| Revised | Specifies the requirement for road tank vehicles intended for use on public roads for the transportation of dangerous petroleum products under the classification of flammable liquids such as petrol or gasoline, diesel or gasoil, jet oil, kerosene, furnace oil and lubricants. | |
| ICS: 75.200 | ||
| TZS 1475: 2011 (1st Ed) | 2011 | Paratha (chapatti) dough – Specification |
| Prescribes essential requirements for uncooked paratha dough intended for making flat unleavened product. The standard applies to kneaded flattened pliable flour discs, prepared from wheat flour milled from Triticumaestivum L or club wheat, Triticumcompactum (Host) or a mixture thereof. | ||
| ICS: 67.060 | ||
| TZS 1350: 2012 (1st Ed) | 2012 | Materials and articles in contact with foodstuffs - insulated containers for domestic use - Specification for insulated bags and boxes |
| Specifies the requirement for portable domestic food and / or drinks insulated containers such as boxes, chests and bags, intended to contain generally wrapped or packed food and/ or dinks in their own container. It does not apply to insulated bags designed specifically for short term storage and transportation of frozen food, containers fitted when a device for production or removal a heat containers for industrials or catering uses, or insulated flask and jugs. | ||
| ICS: 55.160 | ||
| TZS 640: 2001 (1st Ed) | 2001 | Aluminium and aluminium alloy ingots and castings for general engineering purposes – Specification |
| Specifies requirements for the chemical compositions, mechanical properties and other characteristics for aluminium and aluminium alloy ingots intended to be re-melted for production of castings and aluminium and aluminium alloy castings. | ||
| ICS: 77.120.10 | ||
| TZS 1187 (Part 9): 2010 (1st Ed) | 2010 | Road vehicles- Compressed Natural Gas (CNG) fuel system components Part 9: Pressure regulator |
| Specifies test and requirements for the pressure regulator, a compressed natural gas fuel system component intended for use on the types of motor vehicles.. | ||
| ICS: 43.060.40 | ISO: 15500-9: 2001 | ||
| TZS 972: 2007 (1st Ed) | 2007 | Soil quality – Limits for soil contaminants in habitat and agriculture |
| Set limits for soil contaminants in agriculture and habitat. | ||
| ICS: 13.080.99 | ||
| TZS 647: 2014 (2nd Ed) | 2014 | Engine oils – Minimum performance – Specification |
| Revised | Specifies the minimum requirements for engine oils for light-duty and heavy-duty internal combustion engines used under a variety of operating conditions in automobiles, trucks, vans, buses and off-highway farm, industrial and construction equipment. | |
| ICS: 75.100 | ||
| TZS 687: 2002 (1st Ed) | 2002 | Masonry – Vocabulary |
| Defines terms used in the structural design of un-reinforced masonry | ||
| ICS: 01.040.91 | ISO: 9652-5:1999 | ||
| TZS 1796-3: 2015- EAS 93-3: 2000 | 2015 | Preservation of raw hides and skins — Code of practice — Part 3: Pickling |
| New | Apply to raw lamb, sheep, kid and goat skins to be preserved by pickling and intended for tanning | |
| ICS: 59.140 | EAS: 93-3: 2000 | ||
| TZS 727 (Part 1): 2002 (1st Ed) | 2002 | Cement – Part 1- Composition, specifications and conformity criteria for common cements |
| Defines and gives the specifications of 27 distinct common cement products and their constituents | ||
| ICS: 91.100.10 | ||
| TZS 810: 2004 (1st Ed) | 2004 | Test method for determination of sulphated ash from lubricating oil and additives |
| Covers the method for determination of sulphated ash from unused lubricating oils containing additives and additive concentrates used in compounding. | ||
| ICS: 75.100. | ||
| TZS 694: 2002 (1st Ed) | 2002 | Size designation of clothes – Men’s and boy’s outwear garment |
| Establishes a system of designating the sizes of men’s and boys’ outwear garments (including knitwear and swimwear). | ||
| ICS: 61.020. | ISO: 3636: 1977 | ||
| TZS 331: 1987(1st Ed) | 1987 | Cereals – Milled products – Method of test |
| Prescribes methods of test for milled cereal products | ||
| ICS: 67. 060 | ||
| TZS 1332:2010 (1st Ed) ISO 3596: 2000 | 2010 | Animal and vegetable fat and oils – Determination of unsaponifiable mater – Method using diethyl ether extraction |
| Specifies a method using diethyl ether extraction for the determination of the unsaponifiable matter content of animal and vegetable fats and oils. | ||
| ICS: 67.200.10 | ISO: 3596:2000 | ||
| TZS 20: 1981 (1st Ed) | 1981 | Textiles – Woven fabrics – Determination of the number of threads per unit length |
| Describes three procedures for the determination of the number of warp threads (ends) per centimetre and the number of weft threads (picks) per centimetre in woven fabrics as follows: | ||
| Method A – Determination by dissection | ||
| Method B – Determination by traversing thread counter and | ||
| Method C – Determination by counting glass. | ||
| ICS: 59.080.30 | ||
| TZS 225: 1984 (1st Ed) | 1984 | Powders – Scouring – Specification |
| Prescribes the requirements and the methods of sampling and test for scouring powders | ||
| ICS: 71.100.40 | ||
| TZS 922: 2006(1st Ed) | 2006 | Plastics piping systems for non-pressure underground drainage and sewerage – Polyethylene (PE) |
| Specifies the requirements for polyethylene (PE) pipes, fitting and piping systems intended for use for non-pressure underground drainage and sewerage for the conveyance of soil and waste discharge of domestic and industrial origin, as surface water. | ||
| ICS: 23.040.20 | ISO: 8772: 2006 | ||
| TZS 584: 2003 (1st Ed) | 2003 | Wafers – Specification |
| Prescribes requirements and methods of sampling and test for wafers. | ||
| ICS: 67.230 | ||
| TZS 198: 1984 (1st Ed) | 1984 | Leather – Determination of chromium as chromic oxide |
| Prescribes a procedure for the determination of chromium as chromic oxide. It is applicable to all types of leather containing chromium salts. | ||
| ICS: 59.140.30 | ||
| TZS 350: 2015- ISO 6078: 1982 (2nd ed) | 2015 | Black tea — Vocabulary |
| Revised | Provides a list of terms and definitions, applicable to the techniques for processing and assessing black tea for commerce. | |
| ICS: 67.140.10 | ISO: 6078: 1982 | ||
| TZS 1416: 2011 (1st Ed) | 2011 | Agricultural equipments – disc plough – Specification. |
| Specifies the requirements for disc plough used for four-wheel tractor | ||
| ICS: 65.060.20 | ||
| TZS 628: 2004 (1st Ed) | 2004 | Cycles rubber tubes for tricycles and bicycles – Specification |
| Covers the dimensions and other requirements for cycle rubber tubes intended for use with tyres prescribed in TZS 627: 2003 (see clause 2). The tubes shall be manufactured from natural or synthetic rubber or mixture of both, suitable compound and vulcanized. | ||
| ICS: 83.160.10 | ||
| TZS 316: 2002 (1st Ed) | 2002 | Shampoo, soap based – Specification |
| Prescribes the requirements, methods of sampling and test for shampoo based on soap. | ||
| ICS: 71.100.70 | ||
| TZS 643: 2001 (1st Ed) | 2001 | Petroleum products – Determination of oxidation stability of gasoline Induction period method |
| Specifies a method for determination of stability of aviation and motor gasoline in their finished form only, under accelerated oxidation conditions, by measuring the induction period to breakpoint in a pressure bomb apparatus. | ||
| ICS: 77.120.10 | ISO: 7536: 1994 | ||
| TZS 222: 1984 (1st Ed) | 1984 | Soap – Soft – Specification |
| Prescribes the requirements and methods of sampling and test for soft soap | ||
| ICS: 71.100.70 | ||
| TZS 1230: 2010 (1st Ed) | 2010 | Textiles - Specification for mosquito nets -Part 1: Net from100% polyester yarn |
| Prescribes the requirements of two types of mosquito net namely rectangular mosquito nets and circular shaped mosquito nets. These may be bleached or dyed as specified in the contract or order. | ||
| ICS: 97.160 | ||
| TZS 837 (Part 6): 2011 (2nd Ed) | 2011 | Stationary source emissions – Determination of carbon monoxide, carbon dioxide and oxygen – Performance characteristics and calibration of automated measuring systems |
| Revised | Specifies the principles, the essential performance characteristics and the calibration of automated systems for measuring carbon dioxide, carbon monoxide and oxygen in the flues of stationary sources. | |
| ICS: 13.040.40 | ISO: 12039:2001 | ||
| TZS 152: 2015(2nd Ed) | 2015 | Steel tubes — Mild steel tubes and sockets screwed — Specification |
| Rev | Covers the requirements for butt welded and seamless, screwed and socketed and plain end mild steel tubes. | |
| ICS: 77.140.75 | ||
| TZS 1796-2: 2015- EAS 93-2: 2000 | 2015 | Preservation of raw hides and skins — Code of practice — Part 2: Air-drying |
| New | Apply to raw hides and skins to be preserved by air-drying and intended for tanning | |
| ICS: 59.140 | EAS: 93-2:2000 | ||
| TZS 185: 1983 (1st Ed) | 1983 | Milk and milk products – Microbiological – Specification |
| Prescribes microbiological specifications for liquid, condensed and dried milk, cheese, ice cream and butter | ||
| ICS: 07.100.30 | ||
| TZS 1640:2013 | 2013 | Plastics hoses and hose assemblies- Textile- reinforced types for hydraulic applications- Specification |
| Specifies requirements for three types of textile- reinforced thermoplastics hose and hose assembly of nominal size from 3, 2 to 25. | ||
| ICS: 83.140.40 | ISO: 3949:2009 | ||
| TZS 1673: 2014 (1st Ed) | 2014 | Dry split peas — Specification |
| Specifies the requirements and methods of sampling and test for dry split peas of varieties (cultivars) grown from Pisum sativum L. and Pisum sativum var. arvense (L.) Poir. intended for human consumption | ||
| ICS: 67.060 | EAS: 761:2013 | ||
| TZS 1592-2:2013 | 2013 | Motorcycle tyre and rims (Code- designated series)- Part 2: Tyre load ratings |
| Specifies the load ratings for an inch code-designated series of tyres for motorcycles. | ||
| ICS: 43.140 | ISO: 4249-2:1990 | ||
| TZS 1093-14: 2009 (1st Ed) | 2009 | Ceramic tiles – Part 14: Determination of resistance to stains |
| Specifies a method for determining the resistance to stains of the proper surface of ceramic tiles | ||
| ICS: 91.100.20 | ISO: 10545-14: 1995 | ||
| TZS 897: 2006 (1st Ed) | 2006 | Textiles – Specification for woven fabrics used for suits, jackets, slacks, trousers and skirts |
| Specifies technical requirements for three types of weaves used in the manufacture of fabrics intended for making up of suits, jackets, slacks, trousers and skirts | ||
| ICS: 59.080.30 | ||
| TZS 1442 (Part 1): 2011 (1st Ed) | 2011 | Soil shear test Part 1 - Direct shear stress |
| Specifies laboratory test methods to establish the effective shear strength parameter for soils within the scope of the geotechnical investigations. | ||
| ICS: 13.080.20 | ||
| TZS 1442 | 2010 | Performance requirements for motor vehicle frontal protection systems intended for game touring and hunting. |
| Sets out requirements for all types of vehicle frontal protection systems and specifies the road user protection criterion. This standard also require that motor vehicles fitted with a frontal protection system to comply with the applicable regulatory requirements of this country. | ||
| ICS: 43.060.99 | ||
| TZS 199 | 1984 | Leather – Determination of ph and difference figure of an aqueous extract |
| Prescribes a procedure for the determination of pH and difference figure of an aqueous extract for all types of leather in all stages of dressing | ||
| ICS: 59.140.30 | ||
| TZS 1678: 2014 (1st Ed) | 2014 | Textured soya protein products — Specification |
| Specifies requirements and methods of sampling and test for textured soya protein products intended for human consumption. | ||
| ICS: 67.060 | EAS: 802:2013 | ||
| TZS 626: 2001 (1st Ed) | 2001 | Raw milk – Specification |
| Prescribes requirements and methods of sampling and test for raw milk obtained from the cow. | ||
| ICS: 67. 100.01 | ||
| TZS 962: 2007 (1st Ed) | 2007 | Native starch – Determination of starch content – Ewers polarimetric method |
| Specifies a polarimetric method for the determination of the starch content of native starch, with the exception of starch with high amylose content. | ||
| ICS: 67.040 | ISO: 10520: 1997 | ||
| TZS 742: 2010 (2nd Ed) | 2010 | Oilseeds – Sampling |
| Rev | Specifies methods of sampling oilseeds. | |
| ICS: 67.200.20 | ISO: 542: 1990 | ||
| TZS 1637:2013(1st Ed) | 2013 | Rubber and plastics hoses- Hose sizes, minimum and maximum inside diameters and tolerance on cut- to- length hoses |
| Specifies the sizes of rubber and plastics hoses and the minimum and maximum inside diameters permitted for each hose size. It is also specifies tolerance on cut-to-length rubber and plastics hoses for industrial and automotive applications. | ||
| ICS: 83.140.40 | ISO: 1307:2006 | ||
| TZS 1390 (Part 3): 2011 (1st Ed) ISO 8262 - 3: 2005 | 2011 | Milk products and milk based foods –Determination of fat content by Weibull-Berntrop gravimetric method Part 3: Special cases |
| Specifies a reference method for the determination of the fat content of milk- based and of liquid, concentrated or dried milk products to which the Röse - Gottllieb method is not applicable; i.e. those containing distinct quantities of free fatty acids or those which are not completely soluble in ammonia owing to the presence of lumps or non-milk ingredients, such as custards, porridges or certain milk-based products for bakery purposes. | ||
| ICS: 67.100.01 | ISO: 8262 - 3: 2005 | ||
| TZS 498:2010: (2nd Ed) |