Test Requirement

6

Test procedures for non-movable parts 针对固定部件

6.1.1

General 一般要求

6.1.2

Shelf retention test 架子保持测试

6.1.3

Deflection of shelves 架子变形量测试

6.1.4

Strength of shelf supports 架子支撑强度

6.2.1

Sustained test for tops and bottoms 顶部和底部耐荷重测试

6.2.2

Static load test for tops and bottoms  顶部和底部静载测试

6.3.1

Strength of clothes-rail and their supports 挂衣杆强度测试

6.3.2

Dislodgement of clothes rails 挂衣杆分离测试

6.4.1

Test for structure and underframe 结构测试

6.4.2

Drop test 跌落测试

6.4.3

Tests for units with castors or wheels 带轮子储物单元测试

7

Test procedures for movable parts 针对移动部件测试

7.1

Pivoted doors 轴心门

7.1.1

General 一般要求

7.1.2.1

Vertical load on pivoted doors 轴心门垂直静载测试

7.1.2.2

Horizontal load on pivoted doors 轴心门水平测试

7.1.3

Slam-shut test of pivoted doors 轴心门关闭测试

7.1.4

Durability of pivoted doors 轴心门耐久性测试

7.2

Sliding doors and horizontal roll-fronts 滑动门和滚动门

7.2.1

General 一般要求

7.2.2

Slam shut/open test of sliding doors and horizontal roll-fronts 滑动门和滚动门关闭测试                          

7.2.3

Durability of sliding doors and horizontal roll-fronts 滑动门和滚动门耐久性测试

7.3

Flaps 侧翼

7.3.1

Strength of bottom-hinged flaps 底部铰链侧翼的强度

7.3.2

Durability of flaps 侧翼耐久性测试

7.3.3

Drop test for top-hinged flaps 顶部铰链侧翼的跌落测试

7.4

Vertical roll-fronts 垂直滚动门

7.4.1

Slam shut/open of vertical roll-fronts 垂直滚动门关闭测试

7.4.2

Durability of vertical roll-fronts 垂直滚动门耐久性测试

7.5

Extension elements 伸出部件

7.5.1

General 一般要求

7.5.2

Strength of extension elements 伸出部件强度

7.5.3

Durability of extension elements 伸出部件耐久性测试

7.5.4

Slam shut/open test of extension elements 伸出部件关闭测试

7.5.5

Displacement of extension element bottoms 伸出部件底部分离测试

7.5.6

Interlock test 互锁

7.6

Locking and latching mechanism tests 锁的机械测试

7.6.1

General 一般要求

7.6.2

Strength test for locking and latching mechanisms for extension elements 伸出部件上锁定装置强度测试

7.6.3

Locking and latching mechanisms for doors, flaps and roll-fronts 门、侧翼、滚动门上锁定装置强度测试

7.6.4

Durability test of locking and latching mechanisms 锁定装置的耐久性测试

8

Units mounted to the building or other structure 安装在建筑或其他结构上的单元

8.1.1

General 一般要求

8.1.2

Movable parts, shelf supports, tops and bottoms 移动部件、架子支撑、顶部和    底部测试

8.1.3

Sustained load test(overload)  耐荷重测试

8.1.4

Dislodgement test 分离测试

8.2

Units supported by the floor 地板支撑单元

 
Sample required: 5 sets of completed products with assembly instruction (if applicable) is recommend.

样品要求: 全套样品5套并包括安装说明书(如适用).

 
Turnaround time: Regular (11 working days), Express (9 working days) for level 1 and level 2; 13 working days for level 3; 18 working days for further step

所需时间: 针对等级1和2，标准(11个工作天), 加快(9 个工作天)；针对等级3，13个工作天，针对更高等级，18个工作天