HZLAB20230221返回 Back
美国
| Standard | Testing |
| Arc Flash Test Methods | |
| ASTM F1959 per ASTM F1506 | Arc Ratings for Materials |
| ASTM F1959 per ASTM F1891 | Arc Ratings for Rainwear Materials |
| ASTM F2178 | Face Protection |
| ASTM F2621 | Finished Product Testing |
| ASTM F2675 | Glove Testing |
| ASTM F2676 | Electrical Arc Blankets |
| ASTM F887 | Fall Protection |
| IEC 61482-1 Method A | Fabrics |
| IEC 61482-1 Method B | Garments |
| IEC 61482-1-2 | Box Testing |
| Garment Audit for End Users | |
| Destructive testing to ASTM D6413 compared to requirements of ASTM F1506 | |
| ASTM F2621 | Optional arc flash garment evaluations using |
| NFPA 70E/ASTM F1506 Specification | |
| ASTM F1959 | Arc Testing |
| ASTM D6413 | Vertical Flammability |
| AATCC 61 Method 2A | Colorfastness |
| ASTM D3786 | Bursting Strength |
| ASTM D1424 | Elmendorf Tear |
| ASTM D5034 | Breaking Strength |
| AATCC 135 | Dimensional Change |
| NFPA 70E/ASTM F1891 Specification | |
| ASTM F1959 per ASTM F1891 | |
| ASTM D6413 | Vertical Flame |
| ASTM D3776 | Fabric Weight |
| ASTM D1117 | Tear Resistance |
| ASTM D3393 | Water Penetration of Fabric |
| Fed Std 191A Method 5516 | Water Penetration of Seams |
| ASTM F2733 Flash Fire for Rainwear | |
| ASTM F1930 | Manikin Test |
| ASTM D6413 | Vertical Flame |
| ASTM D3776 | Fabric Weight |
| ASTM D1117 | Tear Resistance |
| ASTM D3393 | Water Penetration of Fabric |
| AATCC 127 | Water Penetration of Seams |
| ASTM F2302 Specification for Labeling Flame Resistant Clothing | |
| ASTM D6413 | Vertical Flame |
| ISO 17493 and ASTM F2894 | Heat Degradation |
| ASTM F1358 | Impingement |
| ASTM F2894 | Heat Resistance |
| ASTM D7138 Method B | Thread Melt |
| NFPA 2112 Flash Fire | |
| ASTM F2700 | Heat Transfer Performance |
| ASTM F1930 | Manikin Test |
| ASTM F2894 | Heat and Thermal Shrinkage |
| ASTM D6413 | before and after 100 wash cycles |
| ASTM D7138 Method B | Thread Melt |
| NFPA 2112 | Industrial Simulated Wash Cycles |
| ANSI/ISEA 203 Disposable Flash Fire Coveralls | |
| ASTM F1930 | Manikin Test |
| ASTM D6413 | before and after 100 wash cycles |
| NFPA 1975 Emergency Work Clothing | |
| ASTM F2894 | Heat and Thermal Shrinkage |
| ASTM D751 | Blocking Resistance |
| ASTM D1683 | Seam Breaking Strength |
| Optional Methods in NFPA 1975: | |
| ASTM D6413 | Vertical Flammability |
| ASTM D7138 Method B | Thread Melt |
| NFPA 1977 Wildland Firefighting | |
| ASTM F1939 | Radiant Protective Performance (RPP) |
| ASTM D6413 | Vertical Flammability |
| ASTM F2894 | Heat and Thermal Shrinkage |
| ASTM F1868 | Total Heat Loss (THL) |
| ASTM D1424 | Elmendorf Tear |
| AATCC 135 | Dimensional Change |
| ASTM D1683 | Seam Breaking Strength |
| ASTM D3786 | Bursting Strength |
| ASTM F1060 | Conductive and Compressive Heat Resistance (CCHR) |
| ASTM F1868 | Total Heat Loss (THL) |
| NFPA 1971 Fire Fighter's Turnout Gear | |
| ASTM D6413 | Vertical Flame |
| ASTM F1358 | Impingement |
| ISO 17493 and ASTM F2894 | Heat Degradation |
| ASTM F2894 | Heat Resistance |
| ISO 17492 TPP | |
| ASTM F1060 | Conductive and Compressive Heat Resistance (CCHR) |
| ASTM F1868 | Total Heat Loss (THL) |
| ASTM D3786 | Bursting Strength |
| ASTM D1424 | Elmendorf Tear |
| ASTM D5034 | Breaking Strength |
| ASTM D7138 Method B | Thread Melt |
| AATCC 135 | Home Laundry Dimensional Change |
| High Visibility Products ANSI/ISEA 107, CSA Z96, EN ISO 20471 | |
| ANSI 107 | Garment Evaluation |
| ANSI 107 | Background Materials |
| CSA Z96 | Garment Evaluation |
| CSA Z96 | Background Materials Testing |
| AATCC 8 | Colorfastness to Crocking |
| AATCC 15 | Colorfastness to Perspiration |
| AATCC 133 | Colorfastness to Heat: Hot Pressing |
| ASTM D3787/D6797 | Bursting Strength |
| ANSI/ISEA 105 Glove Classification Standard and ANSI/ISEA 138 Impact Testing | |
| ANSI/ISEA 138 | Impact Resistance Testing |
| ASTM F2992 | Cut Resistance Testing for Gloves |
| ASTM D3884 | Abrasion Resistance: Testing for Gloves |
| ASTM D3389 | Abrasion Resistance: Coated Materials |
| EN 388 | Puncture Resistance Testing for Gloves |
| ASTM F1358 | Ignition Resistance for Gloves |
| ISO 17493 | ASTM F2894 Glove Heat Degradation |
| ASTM F1060 | Conductive and Compressive Heat Resistance (CCHR) |
| ANSI 105 | Dexterity Classification Testing |
| ASTM F1001 | Chemical Resistance Testing [Using either ASTM F903 Penetration or ASTM F739 Permeation] |
| ASTM F2878 | Hypodermic Needle Puncture Testing for Gloves |
| ASTM F3258 Arc Rated Protector Glove Standard | |
| ASTM F2675 | Glove Arc Rating Testing |
| ASTM F2992 | Cut Resistance Testing for Gloves |
| ASTM D3884 | Abrasion Resistance: Testing for Gloves |
| ASTM D3389 | Abrasion Resistance: Coated Materials |
| EN 388 | Puncture Resistance Testing for Gloves |
| Optionally | |
| ASTM F2878 | Hypodermic Needle Puncture Testing for Gloves |
| ASTM D7138 Method B | Thread Melt |
| ASTM F1358 | Ignition Resistance for Gloves |
| ISO 17493 | ASTM F2894 Glove Heat Degradation |
| ASTM F1060 | Conductive and Compressive Heat Resistance (CCHR) |
| ANSI 105 | Dexterity Classification Testing |
| ANSI/ISEA 138 | Impact Resistance Testing |
| Flammability & Heat Resistance | |
| ASTM D6413 | Vertical Flame Resistance |
| ASTM F1358 | Impinged Flame Resistance |
| ISO 17493 | Convective Heat Resistance |
| ASTM F2894 | Heat Resistance (Oven Method) |
| ASTM D7138 Method B | Thread Melt |
| ASTM F2700 | Heat Transfer Performance (HTP) |
| ISO 17492 | Thermal Protective Performance (TPP) |
| EN ISO 11612 Protective Clothing | Clothing to Protect Against Heat and Flame |
| Strength Testing (cut, break, tear, burst, abrasion, puncture) | |
| ASTM D5034 | Breaking Strength (Grab) |
| ASTM D1424 | Elmendorf Tear |
| ASTM D3786 | Bursting Strength |
| ASTM D5733 | Trapezoidal (Trap) Tear |
| ASTM D5587 | Trapezoidal (Trap) Tear |
| ASTM F2992 | Cut Resistance for fabric or gloves |
| ISO 13997 | Cut Testing for Fabric or Gloves |
| ASTM D3884 | Abrasion Resistance |
| ASTM D1683 | Seam Breaking Strength |
| ASTM D1117 | Tear Resistance |
| ASTM D2261 | Tear Resistance, Tongue Method |
| EN 388 | Puncture Resistance for gloves and other PPE |
| Laundering, Conditioning and Weight | |
| AATCC 135 | Dimensional Change |
| AATCC 61 | Colorfastness |
| ISO 6330 | Domestic Washing and Drying Procedures |
| NFPA 2112 | Industrial Simulated Wash Cycles |
| ASTM D1776/D1776M | Practice for Conditioning and Testing Textiles |
| ASTM D3776/D3776M | Test Methods for Mass Per Unit Area (Weight) of Fabric |
| Molten Metal Testing | |
| ASTM-F1002 | Standard Performance Specification for Protective Clothing and Materials for Use by Workers Exposed to Specific Molten Substances and Related Thermal Hazards |
| ISO 11611 | Protective clothing for use in welding and allied processes |
| ISO 11612 Protective clothing | Clothing to protect against heat and flame Minimum performance requirements |
| ISO 9185 Protective clothing | Assessment of resistance of materials to molten metal splash |
| ASTM F955 | Standard Test Method for Evaluating Heat Transfer through Materials for Protective Clothing Upon Contact with Molten Substances |
| Medical Masks, Respirators, and Barrier Face Coverings | |
| F2100 | Specification for Performance of Materials Used in Medical Face Masks |
| F2101 | Test Method for Evaluating the Bacterial Filtration Efficiency (BFE) of Medical Face Mask Materials |
| F3407 | Test Method for Respirator Fit Capability for Negative-Pressure Half-Facepiece Particulate Respirators |
| 16 CFR Part 1610 | Standard for the Flammability of Clothing Textiles |
| TEB-APR-STP-0059 | Determination of Particulate Filter Efficiency Level for N95 Series Filters |
| ASTM F3502 | Standard Specification for Barrier Face Coverings |
| NIOSH 42 CFR 84 | Type N-Series Respirator Testing |
| ASTM F2299 | Particulate Filtration Efficiency (PFE) |
| ASTM F1862 | Resistance to Synthetic Blood Penetration |
| EN 14683 | Differential Pressure |