HZLAB20210902返回 Back
美国
| Test Description | Test Standard |
| Standard Test Method for Density of Sandwich Core Materials | ASTM C271/C271M |
| Standard Test Method for Water Absorption of Core Materials for Structural Sandwich Constructions (Method A) | ASTM C272 |
| Standard Test Method for Shear Properties of Sandwich Core Materials | ASTM C273/C273M |
| Standard Test Method for Flat Wise Tensile Strength of Sandwich Constructions | ASTM C297/C297M |
| Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials at Commercial Power Frequencies | ASTM D149 |
| Standard Test Method for AC Loss Characteristics and Permittivity (Dielectric Constant) of Solid Electrical Insulation | ASTM D150 |
| Standard Test Method for Determining the Izod Pendulum Impact Resistance of Plastics | ASTM D256 |
| Standard Test Method for DC Resistance or Conductance of Insulating Materials | ASTM D257 |
| Standard Test Method for Rubber Property-Compression Set (Method B) | ASTM D395 |
| Standard Test Method for Vulcanized Rubber and Thermoplastic Elastomers-Tension | ASTM D412 |
| Standard Test Method for Rubber Property-Effect of Liquids | ASTM D471 |
| Standard Test Method for Specular Gloss | ASTM D523 |
| Standard Practice for Evaluating the Resistance of Plastics to Chemical Reagents | ASTM D543 |
| Standard Test Method for Water Absorption of Plastics | ASTM D570 |
| Standard Test Method for Rubber-Deterioration in an Air Oven | ASTM D573 |
| Standard Practice for Conditioning Plastics for Testing | ASTM D618 |
| Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers | ASTM D624 |
| Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position | ASTM D635 |
| Standard Test Method for Tensile Properties of Plastics | ASTM D638 |
| Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position | ASTM D648 |
| Standard Test Method for Compressive Properties of Rigid Plastics | ASTM D695 |
| Standard Test Method for Coefficient of Linear Thermal Expansion of Plastics Between -30°C and 30°C with a Vitreous Silica Dilatometer | ASTM D696 |
| Standard Test Method for Shear Strength of Plastics by Punch Tool | ASTM D732 |
| Standard Test Method for Brittleness Temperature of Plastics and Elastomers by Impact | ASTM D746 |
| Standard Test Method for Coated Fabrics – Breaking Strength (Sections 11-16) Procedure A - Grab Test Method and Procedure B - Cut Strip Test Method | ASTM D751 |
| Standard Test Method for Rockwell Hardness of Plastics and Electrical Insulating Materials (M, R, and E scales) | ASTM D785 |
| Standard Test Method for Determination of Relative Viscosity of Polyamide (PA) | ASTM D789 |
| Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials | ASTM D790 |
| Standard Test Method for Density and Specific Gravity (Relative Density) of Plastics by Displacement | ASTM D792 |
| Standard Test Method for Tensile Properties of Thin Plastic Sheeting | ASTM D882 |
| Standard Test Method for Peel or Stripping Strength of Adhesive Bonds | ASTM D903 |
| Standard Test Method for Apparent Shear Strength of Single-LapJoint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal) | ASTM D1002 |
| Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics | ASTM D1003 |
| Standard Test Method for Initial Tear Resistance of Plastic Film and Sheeting | ASTM D1004 |
| Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature | ASTM D1204 |
| Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer | ASTM D1238 |
| Standard Test Method for Vicat Softening Temperature of Plastics | ASTM D1525 |
| Standard Test Method for Compressive Properties of Rigid Cellular Plastics | ASTM D1621 |
| Standard Test Method for Apparent Density of Rigid Cellular Plastics | ASTM D1622 |
| Standard Test Method for Environmental Stress-Cracking of Ethylene Plastics | ASTM D1693 |
| Standard Test Method for Tensile Properties of Plastics by Use of Microtensile Specimens | ASTM D1708 |
| Standard Test Method for Impact Resistance of Plastic Film by the Free-Falling Dart Method | ASTM D1709 |
| Standard Test Method for Brittleness Temperature of Plastic Sheeting by Impact | ASTM D1790 |
| Standard Test Method for Static and Kinetic Coefficients of Friction of Plastic Film and Sheeting | ASTM D1894 |
| Standard Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method | ASTM D1922 |
| Standard Test Method for Tear-Propagation Resistance (Trouser Tear) of Plastic Film and Thin Sheeting by a Single-Tear Method | ASTM D1938 |
| Standard Test Methods for Rubber Property-Brittleness Point of Flexible Polymers and Coated Fabrics | ASTM D2137 |
| Standard Test Method for Rubber Property-Durometer Hardness | ASTM D2240 |
| Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates | ASTM D2244 |
| Standard Test Method for Short-Beam Strength of Polymer Matrix Composite Materials and Their Laminates | ASTM D2344/2344M |
| Standard Practice for Xenon Arc Exposure of Plastics Intended for Outdoor Applications | ASTM D2565 |
| Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor | ASTM D2583 |
| Standard Test Method for Ignition Loss of Cured Reinforced Resins | ASTM D2584 |
| Standard Test Method for Void Content of Reinforced Plastics (Method A) | ASTM D2734 |
| Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index) | ASTM D2863 |
| Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials | ASTM D3039/3039M |
| Standard Test Method for Determining Strength of Adhesively Bonded Rigid Plastic Lap-Shear Joints in Shear by Tension Loading | ASTM D3163 |
| Standard Test Method for Chipping Resistance of Coatings | ASTM D3170 |
| Standard Test Method for Constituent Content of Composite Materials |
ASTM D3171 (Procedures A, B, C, D, E, G) |
| Standard Test Method for Peel Adhesion of Pressure Sensitive Tape | ASTM D3330/3330M |
| Standard Test Method for Blocking Load of Plastic Film by the Parallel Plate Method | ASTM D3354 |
| Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials with Unsupported Gage Section by Shear Loading | ASTM D3410/3410M |
| Standard Test Method for Transition Temperatures of Polymers by Differential Scanning Calorimetry | ASTM D3418 |
| Standard Test Method for In-Plane Shear Response of Polymer Matrix Composite Materials by Tensile Test of a +/- 45 Degree Laminate | ASTM D3518/3518M |
| Standard Test Method for High Speed Puncture Properties of Plastics Using Load and Displacement Sensors | ASTM D3763 |
| Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position | ASTM D3801 |
| Standard Test Method for Determination of Properties of Polymeric Materials by Means of a Capillary Rheometer | ASTM D3835 |
| Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser | ASTM D4060 |
| Standard Test Method for Impact Resistance of Rigid Poly (Vinyl Chloride) (PVC) Building Products | ASTM D4226 |
| Standard Practice for Fluorescent UV Exposure of Plastics | ASTM D4329 |
| Standard Practice for Xenon-Arc Exposure of Plastics Intended for Indoor Applications | ASTM D4459 |
| Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings | ASTM D4587 |
| Standard Test Method for Unnotched Cantilever Beam Impact Strength of Plastics | ASTM D4812 |
| Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending) | ASTM D5023 |
| Standard Test Method for Plastics: Dynamic Mechanical Properties: In Tension | ASTM D5026 |
| Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using 125-mm Flame | ASTM D5048 |
| Standard Test Method for Horizontal Burning Rate of Polymeric Materials Used in Occupant Compartments of Motor Vehicles | ASTM D5132 |
| Standard Test Method for Moisture Absorption Properties and Equilibrium Conditioning of Polymer Matrix Composite Materials | ASTM D5229/5229M |
| Standard Test Method for Shear Properties of Composite Materials by the V-Notched Beam Method | ASTM D5379/5379M1 |
| Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Dual Cantilever Beam) | ASTM D5418 |
| Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact) | ASTM D5420 |
| Standard Test Method for Ash Content in Thermoplastics | ASTM D5630 |
| Standard Test Method for Open-Hole Tensile Strength of Polymer Matrix Composite Laminates | ASTM D5766/5766M |
| Standard Test Method for Determining the Charpy Impact Resistance of Notched Specimens of Plastics | ASTM D6110 |
| Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by FourPoint Bending | ASTM D6272 |
| Standard Test Method for Open-Hole Compressive Strength of Polymer Matrix Composite Laminates (Procedure B) | ASTM D6484/6484M1 |
| Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials Using a Combined Loading Compression (CLC) Test Fixture | ASTM D6641/D6641M |
| Standard Practice for Filled-Hole Tension and Compression Testing of Polymer Matrix Composite Laminates |
ASTM D6742/6742M (Compression1 and Tension) |
| Standard Test Method for Coulometric and Volumetric Determination of Moisture in Plastics Using the Karl Fischer Reaction (the Reaction of Iodine with Water) | ASTM D6869 |
| Standard Test Method for Glass Transition Temperature (DMA Tg) of Polymer Matrix Composites by Dynamic Mechanical Analysis (DMA) | ASTM D7028 |
| Standard Test Method for Shear Properties of Composite Materials by V-Notched Rail Shear Method | ASTM D7078/7078M1 |
| Standard Test Method for High Speed Puncture Properties of Plastic Films Using Load and Displacement Sensors | ASTM D7192 |
| Standard Test Method for Flexural Properties of Polymer Matrix Composite Materials | ASTM D7264/7264M |
| Standard Test Method for Assignment of the DSC Procedure for Determining Tg of a Polymer or an Elastomeric Compound | ASTM D7426 |
| Standard Practice for Calculating Yellowness and Whiteness Indices from Instrumentally Measured Color Coordinates | ASTM E313 |
| Standard Test Method for Enthalpies of Fusion and Crystallization by Differential Scanning Calorimetry | ASTM E793 |
| Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis | ASTM E831 |
|
Standard Test Method for Compositional Analysis by Therm ogravimetry |
ASTM E1131 |
| Standard Practice for General Techniques for Obtaining Infrared Spectra for Qualitative Analysis | ASTM E1252 |
| Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry | ASTM E1269 |
| Standard Test Method for Color and Color-Difference Measurement by Tristimulus (Filter) Colorimetry | ASTM E1347 |
| Standard Test Method for Assignment of the Glass Transition Temperatures by Differential Scanning Calorimetry | ASTM E1356 |
| Standard Test Method for Assignment of the Glass Transition Temperature by Thermomechanical Analysis | ASTM E1545 |
| Standard Test Method for Assignment of the Glass Transition Temperature by Dynamic Mechanical Analysis | ASTM E1640 |
| Standard Test Method for Seal Strength of Flexible Barrier Materials | ASTM F88/88M |
| Standard Test Method for Slow Rate Penetration Resistance of Flexible Barrier Films and Laminates | ASTM F1306 |
|
Standard Test Methods for Hot Seal Strength (Hot Tack) of Thermoplastic Polymers and Blends Comprising the Sealing Surfaces of Flexible Webs |
ASTM F1921/1921M |
| Standard Practices for Making Heatseals for Determination of Heatsealability of Flexible Webs as Measured by Seal Strength | ASTM F2029 |
| Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources | ASTM G151 |
| Standard Practice for Operating Fluorescent Light Apparatus for UV Exposure of Nonmetallic Materials | ASTM G154 |
| Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials | ASTM G155 |
| Rubber, Vulcanized or Thermoplastic - Determination of Tear Strength - Part 1: Trouser, Angle and Crescent Test Pieces - Method A Using Trouser Test Piece | ISO 34-1 |
|
Rubber, Vulcanized or Thermoplastic - Determination of Tear Strength - Part 1: Trouser, Angle and Crescent Test Pieces - Method B Using an Angle Test Piece, with or without a Nick of Specified Depth |
ISO 34-1 |
| Rubber, Vulcanized or Thermoplastic - Determination of Tensile Stress-Strain Properties | ISO 37 |
| Plastics - Determination of Water Absorption | ISO 62 |
| Plastics - Determination of Temperature of Deflection Under Load | ISO 75 |
| Determination of Flexural Properties | ISO 178 |
| Plastics - Determination of Charpy Impact Properties - Part 1: Non- Instrumented Impact Test | ISO 179-1 |
| Plastics - Determination of Izod Impact Strength | ISO 180 |
| Rubber, Vulcanized or Thermoplastic - Accelerated Aging and Heat Resistance Tests | ISO 188 |
| Plastics - Standard Atmospheres for Conditioning and Testing | ISO 291 |
| Plastics - Thermoplastic Materials - Determination of Vicat Softening Temperature (VST) | ISO 306 |
| Plastics - Determination of Tensile | ISO 527-1, -2, -4, -5 |
| Plastics - Determination of Compressive Properties | ISO 604 |
|
Rubber, Vulcanized or Thermoplastic - Determination of Compression Set at Ambient, Elevated or Low Temperatures |
ISO 815-1 |
| Plastics and Ebonite - Determination of Indentation Hardness by Means of a Durometer (Shore Hardness) | ISO 868 (Shore A & D) |
| Plastics - Determination of the Brittleness Temperature by Impact | ISO 974 |
| Plastics - Determination of the Melt Mass-Flow Rate (MFR) and the Melt Volume-Flow Rate (MVR) of Thermoplastics | ISO 1133 |
| Textile-Glass-Reinforced Plastics - Prepregs, Moulding Compounds and Laminates - Determination of the Textile-Glass and Mineral- Filler Content - Calcination Methods (Method A) | ISO 1172 |
| Plastics - Methods for Determining the Density of Non-Cellular Plastics - Part 1: Method A Immersion Method | ISO 1183-1 |
| Rubber, Vulcanized - Determination of the Effect of Liquids | ISO 1817 |
| Plastics - Determination of Hardness - Part 2: Rockwell Hardness (M, R, E Scales) | ISO 2039-2 |
| Plastics - Determination of Ash | ISO 3451-1, -2, -4, -5 |
| Road Vehicles, and Tractors and Machinery for Agriculture and Forestry - Determination of Burning Behaviour of Interior Materials | ISO 3795 |
| Plastics - Determination of Burning Behaviour by Oxygen Index Part 2: Ambient-Temperature Test | ISO 4589-2 |
| Plastics - Methods of Exposure to Laboratory Light Sources - Part 2: Xenon Arc Lamps | ISO 4892-2 |
| Plastics - Methods of Exposure to Laboratory Light Sources - Part 3: Fluorescent UV Lamps | ISO 4892-3 |
| Determination of Tear Resistance - Part 2: Elmendorf Method | ISO 6383-2 |
| Plastics - Determination of Puncture Impact Behaviour of Rigid Plastics - Part 2: Instrumented Impact Testing | ISO 6603-2 |
| Plastics - Determination of Dynamic Mechanical Properties - Part 4: Tensile Vibration - Non-Resonance Method | ISO 6721-4 |
| Plastics - Determination of Dynamic Mechanical Properties - Part 5: Flexural Vibration - Non-Resonance Method | ISO 6721-5 |
| Plastics Film and Sheeting - Determination of Impact Resistance by the Free-Falling Dart Method - Part 1: Staircase Methods | ISO 7765-1 |
| Plastics Film and Sheeting - Determination of Impact Resistance by the Free-Falling Dart Method - Part 2: Instrumented Puncture Test | ISO 7765-2 |
| Plastics - Differential Scanning Calorimetry (DSC) | ISO 11357 |
| Plastics - Thermogravimetry (TG) of Polymers - General Principles | ISO 11358-1 |
| Plastics - Thermomechanical Analysis (TMA) | ISO 11359 |
| Plastics - Determination of the Fluidity of Plastics Using Capillary and Slit-Die Rheometers | ISO 11443 |
| Fibre-Reinforced Plastic Composites - Determination of Flexural Properties | ISO 14125 |
| Fibre-Reinforced Plastic Composites - Determination of Compressive Properties in the In-Plane Direction | ISO 14126 |
|
Fibre-Reinforced Plastic Composites - Determination of the In- Plane Shear Stress/Shear Strain Response, Including the In-Plane Shear Modulus and Strength by the Plus or Minus 45 Degree Tension Test Method |
ISO 14129 |
| Plastics - Determination of Water Content Method B Water Vaporization (Method B) | ISO 15512 |
| Code of Federal Regulations Title 49: Transportation CFR Part 571 Federal Motor Vehicle Standards Section 302 Flammability of Interior Materials also Identified as FMVSS 302 | 49 CFR 571.302; FMVSS 302 |
| Interior Odor Test | Ford FLTM BO131-03 |
| Test for Thermal-Oxidative Stability Characteristics of Plastics |
GM9059P2 (inactive 2012) |
| Determining the Resistance to Odor Propagation of Interior Materials | GMW3205 |
| Chemical Resistance to Fluids | GMW 14334 |
| Method of Test for Volume Resistivity and Surface Resistivity of Solid Electrical Insulating Materials |
IEC 600932 (withdrawn 2015) |
| Electrical Strength of Insulating Materials - Test Method - Part 1: Tests at Power Frequencies | IEC 60243 |
| Recommended Method for the Determination of the Permittivity and Dielectric Dissipation Factor of Electrical Insulating Materials at Power, Audio and Radio Frequencies Including Metre Wavelengths |
IEC 602502 (withdrawn 2018) |
| Dielectric and Resistive Properties of Solid Insulating Materials - Part 3-1: Determination of Resistive Properties (DC Methods) - Volume Resistance and Volume Resistivity - General Method | IEC 62631-3-1 |
| Dielectric and Resistive Properties of Solid Insulating Materials - Part 3-2: Determination of Resistive Properties (DC Methods) - Surface Resistance and Surface Resistivity | IEC 62631-3-2 |
| Test Procedure for Packaging Materials - Test Method 2065 Puncture Resistance | MIL-STD-3010C |
| Flammability of Polymeric Interior Materials - Horizontal Test Method | SAE J369 |
| Test for Chip Resistance of Surface Coatings | SAE J400 |
| Hot Odor Test for Insulation Materials | SAE J1351 |
| Accelerated Exposure of Automotive Interior Trim Components Using a Controlled Irradiance Water Cooled Xenon-Arc Apparatus |
SAE J1885:20052 (withdrawn 2008) |
| Accelerated Exposure of Automotive Exterior Materials Using a Controlled Irradiance Water-Cooled Xenon Arc Apparatus |
SAE J1960:20042 (withdrawn 2008) |
| Accelerated Exposure of Automotive Exterior Materials Using a Fluorescent UV and Condensation Apparatus | SAE J2020 |
| Standard Method for Determining Continuous Upper Temperature Resistance of Elastomers | SAE J2236 |
| Accelerated Exposure of Automotive Interior Trim Components using a Controlled Irradiance Xenon-Arc Apparatus | SAE J2412 |
| Accelerated Exposure of Automotive Exterior Material Using a Controlled Irradiance Xenon-Arc Apparatus | SAE J2527 |
| Test for Flammability of Plastic Materials for Parts in Devices and Appliances | UL-94 |